Product#: 2984581

1970-76 Mopar Lower Steering Column Cover ; A-Body Models

This OER® reproduction Lower Steering Column Cover for 1970-76 Mopar A-Body models. This steering column cover attaches to the dash under the steering column. Manufactured from injection molded ABS plastic with correct...


Product#: 2822187

1964-81 Mopar A / B / C / E Body Horn Contact Set

Reproduction horn contact set for various 1964-74 Chrysler, Dodge and Plymouth models (except Imperial). Each contact set is manufactured with OE-grade materials that replicate the original in design, functionality and...


Product#: 3467836X

1968-78 Horn Contact Switch; ABS Horn Button Retainer; with Tuff Wheel; Mopar

Basic plastic reproduction of the original horn button retainer that fits a wide variety of Chrysler, Plymouth, and Dodge models equipped with the Tuff Wheel steering wheel. Produced in injection-molded plastic, this horn cap...


Product#: 2822789

1967-69 Mopar; Lower Steering Column Cover; A-Body

This OER® reproduction lower steering column cover attaches to the lower dash section under the steering column. Manufactured from injection molded ABS, each cover is produced to exact specifications and includes the...


Product#: MN2150

1963-74; Turn Signal Cancelling Cam; SM-9 Style; Mopar, Ford, Mercury

Reproduction turn signal cancel cam for a wide variety of 1963-71 Mopar models, as well as various 1963-71 Ford, Lincoln, and Mercury models as listed. Replacing the worn, or cracked original cancelling cam will firm up a...


Product#: MW755

1968-73 Mopar Lower Steering Column Bearing ; Manual / Auto with Floor Shift

Reproduction lower steering column bearing for 1968-73 Mopar A, B and E-body models. Bearings are manufactured to factory specifications allowing an exact replacement of the worn out original. If this bearing has not been...


Product#: 409216

16" Steel Splined Steering Shaft; 3/4-36 Spline Each End; 2" Spline Length

Borgeson Steering Shaft, 3/4-36 Splined, Steel, 16" Long, 2" Spline Length for Splined Shafting connection of steering components. We recommend splined or double D shafting, as it?s a simple and safe method of attaching your...


Product#: MW765

1970-71 Mopar Lower Shift Tube White Non-Split Bearing

Replacement lower shift tube bearing for 1970 A, B and E-body and 1971 A and B-body models. This bearing needs to be replaced to reduce movement and to improve the turning of the steering shaft, very important when...


Product#: MP6526

1962-65 Dodge, Plymouth A, B-Body; Shift Cable Grommet; with Push Button Transmission

Reproduction of the original shifter cable grommet designed for use with 1962-65 Dodge and Plymouth A and B body models with push button transmission. Each grommet is manufactured in quality EPDM rubber replicating the...


Product#: MD2142

Turn Signal Cancelling Cam (SM-16 Style)

Reproduction turn signal cancelling cam for various Mopar and other models. The turn signal switch cancelling cam is located in the steering column. This cancelling cam cancels your turn signals when the steering wheel turns...


Product#: G13060

Buick, Chevrolet, Oldsmobile, Pontiac; Upper Steering Column Lock Plate Retainer

This is a Genuine GM upper steering column bearing or lock plate retainer for 1961-2021 GM models. This piece is a round wire retainer that holds the upper bearing or lock plate in poisition. For vehicles with or without...


1971-73 A-Body; 1971-72 B-Body; 1971-74 E-Body; Dodge; Plymouth; Steering Column Foam End Seal; With Column Shift
NEW

Product#: 150990

1971-73 A-Body; 1971-72 B-Body; 1971-74 E-Body; Dodge; Plymouth; Steering Column Foam End Seal; With Column Shift

Reproduction steering column foam end seals for various 1971-73 A-Body, 1971-72 B-Body and 1971-74 E-Body Dodge and Plymouth models with column shift. This steering column tube seal keeps engine fumes from entering the...


Product#: MN3146

1967 A/B/C-Body Steering Column Rebuild Set

Reproduction steering column rebuild set for 1967 A, B, and C-Models. This set contains all the of the following parts: Steering column shaft cover, lock collar set screw, spring lock collar,lower bearing compression spring,...


Product#: MW768

1970-71 Mopar Lower Shift Tube Yellow (Aged) Split Bearing With Spring

Replacement lower shift tube bearing for 1970 A, B and E-body and 1971 A and B-body models. This bearing needs to be replaced to reduce movement and to improve the turning of the steering shaft, very important when...


Product#: MW767

1970-71 Mopar Lower Shift Tube White Split Bearing With Spring

Replacement lower shift tube bearing for 1970 A, B and E-body and 1971 A and B-body models. This bearing needs to be replaced to reduce movement and to improve the turning of the steering shaft, very important when...


Product#: MW766

1970-71 Mopar Lower Shift Tube Yellow (Aged) Non-Split Bearing

Replacement lower shift tube bearing for 1970 A, B and E-body and 1971 A and B-body models. This bearing needs to be replaced to reduce movement and to improve the turning of the steering shaft, very important when...


Product#: MP6522

1967-76 Mopar Steering Column Inserts

Reproduction set of 3 pieces steering column inserts/spacers. These inserts slide into column mounting bracket. Available for most 1967-76 Mopar models. Applications: A-Body 1967-69 Barracuda 1970-76 Duster 1967-76...


Product#: CP500519

Vintage Steering Column Registration Holder

Excellent reproduction of this hard to find accessory. Wraps around steering column and held by springs. Features black crushed grain material as original.


Product#: 2925095

1968-70 Chrysler, Dodge, & Plymouth; Steering Column Jacket Support

Reproduction of the nylon supports that snap into the expanded section of the outer steering column and give support to the intermediate tube (shifter tube for column shift). These are designed for centering the tube in the...


Product#: SMP1

Universal Steering Wheel Puller For 4" Hubs

Fits vehicles with 4" hubs. Complete with standard and machine threaded bolts. Includes the yoke, pressure screw and 3 sets of pulling screws with washers and swivel. Heat treated for strength. Fits great in a small toolbox.