Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...

Product#: TR5483D

1966-79 Ford Bronco, 1965-79 F100,F150,F250,F350 Pickup; Front Sway Bar Kit; 1"; with Hardware

Replacement 1? O.D. front stabilizer bar for 1965-79 Ford F-series pickup and Bronco. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced handling. This kit features a hardened,...

Product#: 154632

Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...

Product#: TR3415A

1966-79 Ford Bronco; Radius Arm Cap Bolt; with Lock Washer; Pair

Radius arm cap bolt and lock washer for 1966-79 Bronco and Ford F-Series 4x4 truck. Superb reproduction of the original Ford bolt that includes a grade 8 lock washer. Sold as a pair of bolts with a pair if washers. 2 pairs...

Product#: W1006

1964-2000 GM; Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH; Various Models; Each

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...

Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...

Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...

Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember

Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...

Product#: 154633

1964-70 Mustang, 1967-70 Cougar; Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...

Product#: 10252

1970-93 Chevy, GMC, Ford, Dodge Truck; Upper Ball Joint; RH or LH; Each

OER® Authorized reproduction of the original type upper ball joint designed for use with a wide variety of 1970-91 GM, 1971-80 Ford, 1972-93 Dodge and Plymouth truck models. The upper ball joint is manufactured to factory...

Product#: 10253

1970-93 Chevy, GMC Ford, Dodge Truck Lower Ball Joint; RH or LH; Each

Reproduction standard duty lower ball joint for a wide variety of GM, Ford, Dodge and Plymouth trucks. Comes with axially assembled retaining ring and nut and must be pressed-into upper a-arm for installation. Fits RH or LH....

Product#: TR390678A

1980-96 Ford Bronco, F100, F150, F250, F350; Lower Coil Spring Stud

Reproduction lower coil spring stud to replace OE # 390678-S100. This is the metal stud for the coil spring on 1980-96 Ford Bronco and 1980-96 Ford F150, F250, F350 models. Sold individually. {fitment}

Product#: TR4730B

1980-96 Ford F-Series Truck, 1980-96 Bronco; Rear Axle Bumper

Reproduction rear axle bump stop for 1980-96 F-100, F-250, and F-350 as well as 1980-96 Bronco. This bumper is manufactured in durable rubber and replicates the original in fit and appearance. Rear axle bumpers are injected...

Product#: *FSB911A

Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH

This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...

Product#: FSB911

Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH

This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...

Product#: TR5B300A

1980-96 Ford Bronco, F100, F150, F250, F350; Upper Coil Spring Retainer

Reproduction upper coil spring retainer to replace OE # 7C2Z-5B300-A. This is the metal retaining clip that secures the top of the coil spring to the coil spring bracket on 1980-96 Ford Bronco and 1980-96 Ford F150, F250,...

Product#: RL1

7/16"-20 Finished Nut; Grade 8; Domestic; Each

Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...

Product#: RL2

7/16" F436 Washer; Hardened; Heat-Treated; Domestic

7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4? to 4? inclusive. These heat treated washers are for general purpose and structural use. For use...

Product#: LW20475

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...

Product#: NT100

#8-32 Nut