Product#: 8545

Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...


Product#: 5195

Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...


Product#: *R401

Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...


Product#: *R402

Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...


Product#: *R403

Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...


Product#: NT400

Speed Nut; 4 mm

Speed nut designed for use with various original and reproduction emblem mounting studs that have a 4mm stud. This speed nut can be applied to virtually any emblem or product that has a 4mm stud and pressed into the hole for...

Speed Nut; 4 mm

MSRP $0.99 ea
Classic $0.69 ea

Product#: MM2268

1947-1992; Emblem Installation Barrel Nut; 3/16"; General Purpose Nut; Each

This is the nut needed to allow you to install all emblems for the fenders, header panel and trunk lid, etc. The barrel nut is a push on style versus the original twist on, which will not require removal of body panels for...


Product#: A6021

1/8" Flanged Acorn Thread Cutting Capped Palnut w/ Mastic Sealer

Stamped steel 1/8" flanged pal nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc coating, cap/dome...


Product#: A6022

8-32 Flanged Stamped Acorn Capped Machine Thread Nut w/o Mastic Sealer

Stamped steel 8-32 flanged machine thread nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc...


Product#: A2426

Push-on Flat Nut; Fits 3/16" Stud Size; Measures 3/8" x 5/8"

Universal flat push-on clip used for variuos applications with a 3/16" stud. Clip measures 3/8" x 5/8" and has a black phosphate finish.


Product#: A6023

10-24 Stamped Acorn Palnut; Gold/Yellow Zinc

Stamped steel 10-24 thread palnut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct yellow zinc coating and...


Product#: 11501047

1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated

OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...


Product#: A3404

Speed Nut 3/16" Self Thread Cutting - Small Washer - Each

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...


Product#: *MM2267K

Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...


Product#: *11293K

Barrel Nut; Fits 1/8" Emblem Stud; Fits 3/16" Hole; Spring Steel; Black Phosphate Finish; 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...


Product#: *8545K

Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...


Product#: *R408

Speed Nut 1/4" Self Thread Cutting - 12 Piece Set

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...


Product#: *5195K

Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set

Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...


Product#: *A2098K

Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set

Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...