Product#: EDL60329

1964-95 Ford 289/302/351W; Edelbrock Performer Cylinder Head; With Hydraulic Flat Tappet Cam; 1.900"

The Edelbrock Performer Cylinder Head is designed for 1965-95 Ford 289, 302 & 351W c.i.d. engine applications. 50-state street legal and provides outstanding performance from Idle-5,500 RPM?s. Perfect for street performance,...


Product#: E77790

Big Block Edelbrock Red Roller Rocker Arms- 7/16", 1.7 Ratio

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...


Product#: EDL2106

Edelbrock Performer Plus Camshaft Set 352-428

This Edelbrock Performer-Plus Camshaft is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles...


Product#: 66911C-BCHW

Extruded Aluminum Roller-Rocker Arms. Ford S/B, 1.6 Ratio, 3/8" Stud.

Rid your engine of internal friction with roller-tipped rocker arms. The race-proven full needle bearing, fulcrum and roller tip not only unleash horsepower, they also lengthen valve train component life and reduce wear and...


Product#: 66409C

proform Big Block Push Rod Set 3/8" +.405 Tall Deck

Big Block Push Rod Sets: Heat treated one-piece pushrod sets for ˘Tall Deck÷ applications. Includes 16 pushrods in a clamshell package.


Product#: 66935

Proform 3/8"-24 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.


Product#: 60116

1955-95 GM Small Block; Comp Cams Valve Lock Set

This hardened steel, single groove Steel Street Lock with 7° lock angle and 11/32" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street applications with lighter valve...


Product#: 12557390

3/8"-24 Rocker Arm Nut

Don't cheap out with inferior rocker arm nuts--use Melling! These rocker arm nuts from Melling are made from quality-grade steel for strength and durability. They're designed to keep your rocker arms positively locked for...


Product#: E77770

Small Block Edelbrock Red Roller Rocker Arms- 1.5 Ratio For 3/8" Stud

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...


Product#: EDL2122

Edelbrock Performer Plus 289-302 Camshaft Set

This Edelbrock Performer-Plus Camshaft is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles...


Product#: E9648

Edelbrock Hardened Steel Pushrod Set for Chevy 348/409 W-Series - Set of 16

Edelbrock pushrods are designed for Chevrolet 348/409 ?W? series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum...


Product#: 66950

Proform 3/8" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks through 1986...


Product#: 66951

Proform 7/16" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks with 7/16"...


Product#: 74016

1967-87 Pontiac 326-455CI V8 Valve Spring Retainer Set

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with...


Product#: AR134711

Chevrolet Small Block ARP 3/8"-24 Rocker Arm Studs

ARP high performance rocker arm studs for Chevrolet Small Block engines are made of 8740 chrome moly forgings and heat-treated to 180,000 psi. Excellent for E.T Bracket Racing, limited rule oval track competition and...


Product#: 61116

Comp Cams Valve Lock Set; Super Locks; 10 Degree Angle; 11/32" Stem Size; 16 Qty

These Comp Cams 611-16 Steel Super Locks™ featuring a lash cap recess, 10° lock angle and 11/32" valve stem size are recommended for all race applications. Super Locks™ have a wider angle (10°) that...


Product#: 50316

Comp Cams Valve Stem Seal Set; For 11/32" Valves & .530" Guides

Comp Cams valve stem oil seals positive stop teflon. Guide .530 in. Valve size 11/32 in. - 16. Made in USA Sold as a set of 16.


Product#: 66936

Proform 7/16"-20 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.


Product#: 66415C

Proform 1-Pc Pontiac Push Rod Set 5/16"

These Proform pushrods can give you the foundation you need for a reliable valvetrain. They are manufactured from 4130 chromoly heat-treated tubing with .065-inch wall thickness. Proform pushrods can be used with guideplates....


Product#: 6565B

1969-78 Ford / Mercury; 351W V8; Engine Push Rod;

Stock replacement push rod for 1962-78 Ford 351W small-block engines. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes.