Oldsmobile All Models Parts - Weatherstrip

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Factory-style replacement hood side stop bumper for various 1968-71 Mopar B-Body models including Charger, Coronet, Belvedere, Road Runner, Satellite and Superbird models. Designed to factory specifications to correctly...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

Starter Cable Boot for 1954-1960 Oldsmobile 88, Dynamic, Super, Fiesta and 98 models, Also 1932-1953 Buick models and other various 1954-1972 GM models as required.

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

Precision's weatherstrip lube significantly reduces friction, thereby reducing the installation force required to assemble parts & fittings. Helps to avoid injuries related to slippage and repetitive stress, reduces rejects,...

This hook tool has a small, round steel ball on the end. Once the steel ball is inserted down into the rubber gasket, it is very difficult for it to come out. If it should slip out of the gasket, there is less of a chance you...

Reproduction of the original hood adjustment bumpers designed for use on various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated,...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

The lockstrip insert tool is is specifically designed for self-sealing two-piece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel.

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal wire...

3M auto sealer is a black flowable product for installing weatherstrip that requires glue, or repairing leaks between glass and rubber or metal surfaces. Permanently seals windshields, back glass and other places where...

Use the rope in tool when working with rubber gasket set glass. The unique counter-grip plastic handle injects the rope through its stem as it is pulled around the gasket. There is plenty of enough durable rope to fit around...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Professional windshield removal tool for all vehicle applications. Features an aluminum handle with diamond cut pattern for added grip. Heavy duty braided wire secures the pull handle to the cutting blade. Large durable...

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Reproduction roof rail weatherstrip channel screw set for 1970-81 Camaro, Firebird, and other various GM models. These screws feature the correct style large head that is required for mounting coupe weatherstrip channels. #8...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

Replacement style self-tapping screws designed to attach the weatherstrip channels on 1962-67 Chevy II/Nova, 1967-69 Camaro. and 1967-69 Firebird coupe or convertible models. These screws feature the large head that is...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Correct reproduction of the original roof rail weatherstrips designed for use on 1967-68 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...

Reproduction of the original license plate / fuel door stoppers used for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note:...

Door lock pillar bumper for a variety of GM applications. Sold individually. Use as required for your application GM Applications: 1966-70 Oldsmobile Toronado 1967-70 Buick Riviera 1967-70 Cadillac Eldorado

Reproduction of the original headlight rim seal designed for use with various 1955-57 Buick and Oldsmobile models. This headlight seal aattaches to the inner lip of the headlight bezel and seals around the headlight bulb....

Replacing the original leaky or cracked weatherstrip will create a weather-tight seal to keep the elements out when the door is closed. Keep the weather where it belongs- outside. Manufactured to exact specifications, these...

Rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for precise factory fit. This also has the slot to accept the outer edge?s decorative molding. Chevrolet Applications ...

1963-64 GM Full Size Vehicle rear window gasket for 4-door Hardtop. This gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise factory fit. Fitted gasket provides a formed,...

Front door lock pillar seal. This part seals the bottom of the rear side window, and may also be known as a door jamb seal. Fully molded authentic rubber construction with metal core. Includes eight (8) clips for easy...

Reproduction of the original front door frame weatherstripping designed for use on 1963-64 GM Full Size 4 door hardtop models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M...

Reproduction 1960 GM full size vehicle front door vent window weatherstrip set. This weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. Set is for Left & Right Hand. ...

Correct reproduction of the original weatherstrip between the door glass and vent window. This piece inserts in the vent window between the door glass and vent window and extends down into the door area. Quality weatherstrip...

One pair of Quarter window vertical weatherstrips for a wide array og GM makes and models. These are the pieces which mount on the leading edge of the rear quarter window and seal the back of the door glass to the quarter...

Reproduction of the original brake and clutch pedal rubber bumpers designed for use on 1955-56 Chevrolet models. Each bumper is designed and manufactured to replicate the original for a perfect replacement. Includes 1 brake...

This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...

Correct reproduction of the original roof rail weatherstrips designed for use on 1969-70 Impala Custom/Caprice models. Eliminate water or other elements from entering the passenger area by replacing these essential seals....

Reproduction of the original trunk weatherstrip manufactured in the correct configuration. Prevent water damage in your trunk area by replacing the worn and damaged weatherstrip with this authentic reproduction. The soft...

This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....

Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...

Reproduction 1959-60 GM 4-Door Wagon, tailgate weatherstrip. Pinchweld finish on body. Length: 14.5", Height: 1.0". Replaces GM# 4294952. Buick Application: 1959-60 Buick Invicta 4-door Wagon, 2 & 3 seat ...

Reproduction of the original outer door remote mirror mounting gasket for use with the various applications listed. Each gasket is manufactured to replicate the original is fitment and design. Can be used with the original...

1959-60 Hardtop roof rail weatherstrips. This part fits on the roof of the vehicle and seals the side windows when they are fully raised. Includes clips for molded ends and pre-installed clips spaced 4" apart along...

Reproduction of the rubber bumper to fit a variety of GM models and applications. Sold individually. Refer to detailed applications below. Buick Applications- For Door Pull Handles: Regal 1991-92 - rear door Skylark 1986-91...

Reproduction of the original rear door bumpers designed for use on the rear doors for 1955-57 GM Full Size models. These rubber stoppers are designed to help keep your rear door aligned and in the correct position. Normally...

Superb reproduction of the original back glass weatherstripping which surrounds the back window glass channel for 1962-64 Impala and Full Size models. Each weatherstrip is designed to factory specifications with the correct...

Reproduction weatherstrip which inserts horizontally on the inner and outer section of the side door windows front and rear. This set include a flat outer chrome bead unlike the more original round chrome bead style....

Reproduction of the original door window channel strips for 1973-74 Nova 2 door sedan models without vent windows. Each set includes flexible upper U-channel inserts and vertical glass run strips to replace the worn out or...