Oldsmobile All Models Parts - Body Gaskets & Seals

Precision's weatherstrip lube significantly reduces friction, thereby reducing the installation force required to assemble parts & fittings. Helps to avoid injuries related to slippage and repetitive stress, reduces rejects,...

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

Correct reproduction of the original roof rail weatherstrips designed for use on 1967-68 Impala and Full Size GM 2 door hardtop models. Eliminate water or other elements from entering the passenger area by replacing these...

Reproduction of the original license plate / fuel door stoppers used for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note:...

Reproduction of the original headlight rim seal designed for use with various 1955-57 Buick and Oldsmobile models. This headlight seal aattaches to the inner lip of the headlight bezel and seals around the headlight bulb....

Reproduction of the original front door frame weatherstripping designed for use on 1963-64 GM Full Size 4 door hardtop models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M...

Correct reproduction of the original weatherstrip between the door glass and vent window. This piece inserts in the vent window between the door glass and vent window and extends down into the door area. Quality weatherstrip...

This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...

This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....

Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...

Reproduction 1959-60 GM 4-Door Wagon, tailgate weatherstrip. Pinchweld finish on body. Length: 14.5", Height: 1.0". Replaces GM# 4294952. Buick Application: 1959-60 Buick Invicta 4-door Wagon, 2 & 3 seat ...

Reproduction of the original outer door remote mirror mounting gasket for use with the various applications listed. Each gasket is manufactured to replicate the original is fitment and design. Can be used with the original...

Reproduction of the original rear door bumpers designed for use on the rear doors for 1955-57 GM Full Size models. These rubber stoppers are designed to help keep your rear door aligned and in the correct position. Normally...

Superb reproduction of the original back glass weatherstripping which surrounds the back window glass channel for 1962-64 Impala and Full Size models. Each weatherstrip is designed to factory specifications with the correct...

Reproduction of the original door window channel strips for 1973-74 Nova 2 door sedan models without vent windows. Each set includes flexible upper U-channel inserts and vertical glass run strips to replace the worn out or...

1969-70 GM Full Size Vehicle rear door lock pillar seal for 4-door Hardtop. This part seals the bottom of the rear side window and may also be known as a door jamb seal Fully molded authentic rubber construction with metal...

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

1962-72 GM Full Size Vehicle Door drain hole seal. Replaces GM# 7789247. Applications 1967-72 Chevrolet Caprice 4-door Hardtop 1967-68 Chevrolet Caprice 4-door Wagon, 2 & 3 seat 1969-69 Chevrolet Caprice Kingswood Estate...

Reproduction door frame weatherstrip set for Chevrolet Impala and other GM Full Size 2-door hardtop and convertible models. This reproduction is designed to replace the original exactly featuring the correct molded ends and...

OER® reproduction of the original upper clutch push rod boot designed for use with various 1970-81 Buick, Chevrolet, Oldsmobile, and Pontiac models. Each clutch rod boot is manufactured in quality EPDM rubber matching the...

Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1960-72 GM models. Manufactured to factory specifications including correct stud to adjust for height concerns. Eliminates the...

Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1959-60 GM Full Size models. This windshield seal is designed for use on 2 or 4 door sedan and wagon models as listed. This...

Reproduction of the original hood to cowl seal designed for use on various 1955-60 GM models. Includes the hood to cowl seal and installation clips. This seal will keep rain and dirt from entering your engine compartment. A...

Superb reproduction of the original back glass weatherstripping which surrounds the back window glass channel for 1963-64 Impala and Full Size models. Each weatherstrip is designed to factory specifications with the correct...

Reproduction of the original roof rail weatherstrip designed for use on 1967-68 Impala 2 door Fastback, Wildcat, Le Sabre, and various GM models as listed below. This quality reproduction weatherstripping is manufactured in...

This reproduction door handle and door lock gasket set includes a complete set of door handle gaskets and door lock gaskets used to install the outer door handles and door locks on the various models listed below. Each set...

Reproduction of the original rubber seal designed to replace the back glass weatherstrip on 1959-60 GM Full Size 2 door hardtop models. Manufactured from ozone resistant EPDM rubber and from the same OE specs as the original...

Reproduction front door frame weatherstrips for 1967-1968 Chevrolet Impala and Full Size 2 door sedan hardtop models. Weatherstripping installs around the front doors. Creates a weather-tight seal between the door and the...

Correct reproduction of the original U-shape rubber molded weatherstrip seal originally installed on 1969-70 Impala Custom, Caprice and convertible models. This seal attaches to the door jamb area under the quarter window...

Reproduction of the original hood to cowl seal weatherstrip designed for use on 1991-96 Chevrolet Caprice and 1994-96 Impala models. Each hood seal is manufactured from durable rubber in the original configuration for a...

This high quality reproduction of the original weatherstrip is manufactured with OEM type rubber and installs vertically on the side quarter window edge where the quarter window meets the front door window. For use on 2 door...

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1959-60 GM Full Size models. This windshield seal is designed for use on 2 or 4 door sedan models as listed. This gasket works with...

Reproduction of the original style door frame weatherstripping designed for use on various GM full size models including 1967-68 Impala 2 door hardtop and 2 door convertible models. Each weatherstrip is manufactured in the...

Reproduction of the original "J" shape weatherstripping designed specifically for use on 1958 Impala and GM Full Size models. This specialized weatherstrip mounts on the front of the door shell and seals against the pillar...

Sold individually. 2 required per door. 4 required per vehicle. Applications: 1973-1974 Buick Apollo 1978-1987 Buick Regal 1984-1987 Buick Grand National 1987-1987 Buick GNX 1975-1979 Buick Skylark 1965-1980 Chevrolet...

Replacing the original leaky or cracked weatherstrip will create a weather-tight seal to keep the elements out when the door is closed. Installed on the outer frame of the door, this weatherstrip seals the door frame from the...

This reproduction gasket set includes a complete set of door handle gaskets used to install the outer door handles on the various models listed below. Each set includes correct die-cut gaskets for both RH and LH outer door...

Reproduction of the original quarter window vertical weatherstripping designed for 1958-64 Impala, Bel Air, Electra, Le Sabre, El Dorado, and other Full Size GM models as listed. This high quality reproduction is manufactured...

Reproduction of the original door frame weatherstripping designed for use on 1965-68 GM Full Size 4 door hardtop models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M material...

Door jamb light switch mounting pad for all 1941-56 Oldsmobile and Buick models and 1948-64 Cadillacs. Die cut rubber gasket that mounts under the door jamb switch. Sold individually. Buick Applications: 1941-56 All Models ...

Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...

Reproduction of the original door frame weatherstripping designed for use on 1967-68 GM Full Size 4 door sedan models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M material...

Reproduction of the original style roof rail weatherstrip that installs along the roof rail section from the pillar to the rear window along the roof line.Each weatherstrip is manufactured with quality E.D.P.M rubber compound...

Reproduction of the original style fender skirt splash aprons for use with 1975-79 Chevrolet Nova and GM X-Body models. Replace your old splash aprons with new reproductions and keep your engine compartment clean and free of...

Reproduction of the original door frame weatherstripping designed for use on 1961-64 GM Full Size 4 door and wagon models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M...

Reproduction of the original hood to cowl seal weatherstrip designed for use on 1991-96 Chevrolet Caprice and 1994-96 Impala models. Each hood seal is manufactured from durable rubber in the original configuration for a...

Reproduction of the original style weatherstrip clip receiver seal designed for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert...

Reproduction of the original heater core tube to firewall seal for various 1967-79 Buick, Chevrolet, Oldsmobile, and Pontiac models with air conditioning. Manufactured to correct dimensions from quality EDPM rubber that...

Quality reproduction of the original weatherstripping that seals the area between the roof rail and door glass helping to eliminate the elements from entering the passenger and interior area. Each weatherstrip is molded to...

Headlight rim seal attaches to the inner lip of the headlight bezel and seals around the headlight bulb. Sold individually. Buick Applications: 1940-54 all models Cadillac Applications: 1952-56 all models Oldsmobile...

Reproduction of the original door handle gasket designed for use on various 1970-88 GM models. This gasket inserts on the back of the outer door handle and acts as protection between the handle and the paint. Sold...

Headlight bucket to fender mounting pad to fit a wide variety of 1940-56 GM models. Serves as a seal from the headlamp assembly to the fender Buick Applications: 1949 Super & Roadmaster 1950-53 all models Cadillac...

Reproduction of the original door frame weatherstripping designed for use on 1961-64 Impala and Full Size GM models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M material to...

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1963-64 GM Full Size models. This windshield seal is designed for use on 4 door hardtop models as listed. This gasket works with...

Windshield wiper tranmsission mounting pads are the moulded rubber gasket between the cowl and the wiper transmission assembly. A small part that adds an extra fine detail to your restoration. Sold individually. Buick...