Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
NEW

Product#: 154633

Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...


Product#: M2DS

CPP; Mustang II, 1975-80 Pinto / Bobcat; 2" Drop Spindles

CPP's Mustang II drop spindles are built from forged steel and heat treated for superior strength. Designed to drop the front end approximately 2" lower than stock while maintaining stock geometry. Will fit 1974-78 Ford...


Product#: 39102G

1971-03 GM Passenger Car / Truck Polyurethane Upper Control Arm Bumpers; Black

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...


Product#: 39102R

1971-03 GM Passenger Car / Truck Polyurethane Upper Control Arm Bumpers; Red

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...


Product#: 913128R

1970-81 F-Body; 78-87 Regal - Ball Joint Boot Set - Red

Polyurethane ball joint boots from Energy Suspension. Designed to never wear out as conventional boots do. Replace your original ball joint boots with these new polyurethane style boots. Set includes 2 upper boots and 2...


Product#: 6166

1936-56 Buick/Oldsmobile; Seal; Lower Control Arm Pivot Pin; Each

Lower control arm pivot pin seal for all 1936-56 Oldsmobiles and 1937-56 Buicks. Four required per vehicle, sold individually.


Product#: K6108

1964-73 Buick, Chevrolet, GMC, Oldsmobile, Pontiac; Upper Control Arm Bushings

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...


Product#: 913128G

1970-81 GM F-Body; 78-87 Regal - Ball Joint Boot Set - Black

Polyurethane ball joint boots from Energy Suspension. Designed to never wear out as conventional boots do. Replace your original ball joint boots with these new polyurethane style boots. Set includes 2 upper boots and 2...


Product#: 384220

1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each

Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...


Product#: 12235

1961-1994 GM, Ford; Upper Control Arm Bushing; Front or Rear; Various Applications

Reproduction of the original control arm bushing designed for use on the the upper control arm for various 1961-1994 GM and Ford models. Manufactured in steel clad rubber that replicates the original control arm bushing in...


Product#: M2SP

1974-78 Mustang II, 1975-80 Pinto / Bobcat; Stock Height Spindles

CPP's Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are...


Product#: 33105G

1974-79 Black Polyurethane Control Arm Bushing Set

Installing performance polyurethane bushings will give you an incredible improvement in handling and control no matter what kinds of demands you place on your vehicle. This front control arm bushing set will help maintain ...


Product#: 33105R

1974-79 Red Polyurethane Control Arm Bushing Set

Installing performance polyurethane bushings will give you an incredible improvement in handling and control no matter what kinds of demands you place on your vehicle. This front control arm bushing set will help maintain ...


Product#: PE71706R

1971-90 Impala / Full Size, 1978-87 Buick Regal Rear Upper Red Polyurethane Coil Spring Isolators

Rear upper coil spring isolators from Prothane look great and reduce noise. Their polyurethane construction solves the common problem of worn or rotted original rubber pads. 1/4" thick, 2-1/8" I.D., 3-11/16" O.D. ...


Product#: 154103

1964-80 Buick, Chevy, Olds, Pontiac; Inner Tie Rod; LH or RH, OE Design; Various Models

Correct in appearance with original factory installed components. High quality new reproduction inner tie rod from Classic Suspensions. Manufactured by an OE supplier to modern technical and safety specifications while...


Product#: 411143

1939-56 GM; Rubber Bumper; For Lower Front Control Arm; Each

Rubber bumper for front lower control arm on 1939-56 Oldsmobile, and 1940-56 Buick models. Also used as a rear axle bumper on 1950-53 Cadillac models. Sold individually. Two required per vehicle Buick Applications 1940-56...


Product#: PE71706G

1971-90 Impala / Full Size Rear Upper Black Polyurethane Coil Spring Isolators

Rear upper coil spring isolators from Prothane look great and reduce noise. Their polyurethane construction solves the common problem of worn or rotted original rubber pads. 1/4" thick, 2-1/8" I.D., 3-11/16" O.D. Polyurethane...


Product#: K5903612

Torque Arm 3 hole front removable Crossmember mount 36" long / 1 5/8" tube, 36" 1-1/4 tube

This Chris Alston's Chassisworks universal-Fit Torque Arm Crossmember is a weld-in crossmember. It has a removable center section with a three-position mount. The crossmember has a 1 and 5/8-inch diameter tube for that has a...