Plymouth Barracuda Parts - Console Parts

We now offer #8 x 1" chrome sheet metal screws with integral washer. These screws were designed for use on many different components including, interior pillar post moldings, kick panels, rear side panels, interior door...

We now offer these #8 x 1-1/2" chrome sheet metal screw with integral washer. This screw was used on many different components including, interior pillar post moldings, kick panels, rear side panels, interior door panels,...

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimensio ns measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimension s measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Shifter This economically priced shifter is of universal design, so it will fit a wide variety of truck applications. This economically priced shifter is of universal design, so it will fit a wide variety of truck...

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimensio ns measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

This 1994-1996 Camaro 5-Speed Manual Transmission Shift Plate is a genuine GM replacement part. The 5-speed manual shifter plate comes complete with the shifter boot, shifter boot ring, ashtray lid and ashtray. It's comprised...

Restore the console in your vehicle with brand new reproduction parts from Classic Industries®. This new, reproduction top plate is manufactured from metal with a woodgrain finish in the correct grain and color. Mopar...

Replace the deteriorated or missing original upper shift boot of your Hurst Pistol-Grip shifter-equipped Mopar B or E-Body to seal the area around the shift mechanism the way the factory intended. For models with center...

Replacement console brackets for 1971-74 B-Body and 1970-74 E-Body models.

Reproduction of the original shift boot bezel designed for use on various 1966-76 Mopar A body models with manual transmission. Each bezel is manufactured in stamped steel with a bright chrome finish replicating the original...

Replacement bulb for a variety of applications. Applications may vary depending on vehicle model and year.

Reproduction of the original upper "Pistol Grip" shift boot bezel for use on 1970-74 Mopars with manual transmissions. Add new life to your Mopar's interior by replacing the original upper boot bezel of the Hurst Pistol-Grip...

Reproduction Inland lower shifter boot for 1966-68 A/B-Body vehicles with the A383 Inland 4-speed shifter. Replace that torn or missing lower shifter boot with a brand new reproduction boot.

OER® reproduction of the upper shift boot designed for 1970-74 Mopar B and E-Body manual transmission models with a round Hurst shifter. The shift boot is manufactured to exact factory dimensions and will fit all models that...

1971-74 Mopar B and E Body reproduction of the floor foor console lid latch striker.

This decal is reproduced to duplicate the style, font, and spacing of the original instrument face. Machine-cut from high quality 3M material, designed to lie flat and wrinkle free. Made with a custom combination of printing...

Now you can replace the tunnel portion of the shifter area without replacing the entire floor pan. We offer this quality stamped panel to repair a hack job on a shifter installation. Mopar Authentic Restoration ™...

Reproduction of the original shifter indicator lens featuring P-R-N-D-2-1 shifter pattern for models equipped with an automatic transmission and center console. Designed and manufactured for an authentic appearance, each...

Reproduction of the original console trim designed for use on 1966-69 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal and chrome plated offering an authentic appearance. Over many years,...

Reproduction of the original console top plate trim designed for use on 1966-1969 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the...

Reproduction of the original console door designed for use on 1966-69 Mopar A-body models. Each console door is manufactured in zinc die-cast metal and chromed to match the original console door. Will replace the pitted or...

Reproduction of the original console trim designed for use on 1969-76 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the original console...

Reproduction of the original shifter slider plate designed for use on 1971-74 E-Body and 1971-74 B-Body Mopar vehicles equipped with an automatic transmission and center console. Each slider plate is manufactured to correct...

Restore the woodgrain on your 1970-74 E-body or 1971-74 B-body console with a brand new reproduction woodgrain insert from Classic Industries®. If your console plates are in good condition, but the woodgrain is...

Replace deteriorated or missing shift boots to seal the area around the shift mechanism just like the factory intended. We carry a variety of boots and bezels for many different models. Upper boots seal the area where the...

This tachometer circuit board is made from flame-resistant fiberglass for strength and superior bonding with the copper traces. Nickel-plated connector pins and circuit traces prevent corrosion. Applications: 1967-69...

Restore the console in your vehicle with brand new reproduction parts from Classic Industries®. This console door is an exact reproduction of the original and comes without hardware. Mopar Authen tic Restoration™...

Reproduction of the original console top plate trim designed for use on 1969-1976 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the...

Replace the deteriorated or missing original upper shift boot of your Hurst Pistol-Grip shifter-equipped Mopar B or E-Body to seal the area around the shift mechanism the way the factory intended. For use on models without...

Designed for large hole shifter installations, the Hurst Super Boot and Plate is for use with Competition/Plus Shifters. Measures 7-3/4" x 8-3/4", and comes complete with boot, chrome ID plate and all mounting hardware.

Reproduction of the original lower shift boot designed for use on 1966-76 Mopar A-bodfy models with manual transmissions. This item is manufactured from soft pliable molded rubber material and includes an integrated inner...

Restore the woodgrain on your 1969 A-body console with a brand new set reproduction woodgrain inserts from Classic Industries®. If your console plate and lid are in good condition, but the woodgrain is scratched, worn or...

Reproduction of the original console top plate trim designed for use on 1969-1976 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the...

Reproduction of the original console door designed for use on various 1969-76 Mopar A-body models. Each console door is manufactured in zinc die-cast metal and includes correct woodgrain to match the original console door....

This tachometer circuit board is made from flame-resistant fiberglass for strength and superior bonding with the copper traces. Nickel-plated connector pins and circuit traces prevent corrosion. Fits with point style or...

Reproductions of the gearshift control shaft boot, mounting flange, and gasket used on console shift cars with automatic transmission. The assembly includes an injection molded torque shaft boot, an open cell foam gasket, and...

Reproduction of the original console trim designed for use on 1966-69 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal and chrome plated offering an authentic appearance. Over many years,...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

Reproduction of the original console top plate trim designed for use on 1966-1969 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the...

Reproduction of the original shifter boot and bezel designed for use on 1966-74 Mopar A, B, and E- body models. Each shift boot is designed and manufactured in EPDM molded rubber compound replicating the original in fitment...

Reproduction of the original shift indicator lens for use on various Mopar A-body and B-body models. Each indicator is manufactured in quality acrylic materials replicating the original lens. Features the letters/numbers...

Reproduction of the original shifter slider plate designed for use on 1970 E-Body models equipped with an automatic transmission and center console. Each slider plate is manufactured in black ABS plastic replicating the...

Reproduction of the original console shift Indicator lens designed for use with 1971-74 Mopar B and E body models. Manufacture in clear acrylic ABS matching the original in quality, fitment and appearance. Features...

Replace the glove box or center console lock assembly in your 1962-76 Mopar muscle car with a brand new reproduction from Classic Industries®. This fully assembled lock assembly features a die-cast lock body, stainless...

Reproduction of the original console shift plate slider designed for use on 1966-76 Mopar A and B Body models. Manufactured in ABS plastic to original specifications. Replace the old or worn out shift plate silder in the...

Restore the woodgrain on your 1969 A-body console with a brand new set reproduction woodgrain inserts from Classic Industries®. If your console plate and lid are in good condition, but the woodgrain is scratched, worn or...

Restore the woodgrain on your 1970-74 E-body or 1971-74 B-body console with a brand new reproduction woodgrain insert from Classic Industries®. If your console plates are in good condition, but the woodgrain is...

Reproduction of the original console trim designed for use on 1969-76 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the original console...

Reproduction shifter outer trim plate for vehicles equipped with a center console. Designed and manufactured for an authentic appearance, this reproduction will fit and install as original and features a beautiful chrome...

Replacement console brackets for 1971-74 B-Body and 1970-74 E-Body models.