Plymouth Belvedere Parts - Console Parts

We now offer #8 x 1" chrome sheet metal screws with integral washer. These screws were designed for use on many different components including, interior pillar post moldings, kick panels, rear side panels, interior door...

Reproduction of the original chrome sheet metal screws designed for various applications on 1960's, 1970's and 1980's models where #8 x 1-1/2" chrome screws were applied. Each screw replicates the original in appearance and...

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimension s measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

This 1994-1996 Camaro 5-Speed Manual Transmission Shift Plate is a genuine GM replacement part. The 5-speed manual shifter plate comes complete with the shifter boot, shifter boot ring, ashtray lid and ashtray. It's comprised...

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimensio ns measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimensio ns measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Shifter This economically priced shifter is of universal design, so it will fit a wide variety of truck applications. This economically priced shifter is of universal design, so it will fit a wide variety of truck...

OER® reproduction of the upper shift boot designed for 1970-74 Mopar B and E-Body manual transmission models with a round Hurst shifter. The shift boot is manufactured to exact factory dimensions and will fit all models that...

Replace the discolored, missing or deteriorated console carpet with brand new reproduction carpet from Classic Industries®. Originally the console was covered with carpeted panels in certain areas to help the console...

This tachometer circuit board is made from flame-resistant fiberglass for strength and superior bonding with the copper traces. Nickel-plated connector pins and circuit traces prevent corrosion. Fits with point style or...

This tachometer circuit board is made from flame-resistant fiberglass for strength and superior bonding with the copper traces. Nickel-plated connector pins and circuit traces prevent corrosion. Applications: 1967-69...

Reproduction Inland lower shifter boot for 1966-68 A/B-Body vehicles with the A383 Inland 4-speed shifter. Replace that torn or missing lower shifter boot with a brand new reproduction boot.

Reproduction console side trim for 1966-70 4-speed B-Body models. Manufactured in stainless steel and triple chrome plated for a deep, smooth finish. Hardware not included. For attaching clips use #MB1470. (Use as required) ...

This new tachometer features an authentic appearance, but is internally updated with modern electronic technology that allows it to work with many different types of ignition systems including breaker point, electronic...

Replace your deteriorated or missing shift boot to seal the area around the shift mechanism just like the factory intended.

Reproduction console side trim for 1966-70 automatic B-Body models. Manufactured in stainless steel and triple chrome plated for a deep, smooth finish. Hardware not included. For attaching clips use #MB1470. (Use as required)...

Replace the deteriorated or missing original upper shift boot of your Hurst Pistol-Grip shifter-equipped Mopar B or E-Body to seal the area around the shift mechanism the way the factory intended. For models with center...

Restore the woodgrain on your 1968-70 B-body console with a brand new set factory style replacement woodgrain inserts from Classic Industries®. If your console plates are in good condition, but the woodgrain is...

Reproduction console door mounting strips and catch bracket for 1966-70 B-Body models. Manufactured with OE-quality components for a direct replacement. This strip attaches to the console body to lend reinforcement to the...

1966-1970 Dodge Coronet (500) 1968-1970 Dodge Super Bee 1969-1969 Dodge Charger (Daytona) 1966-1970 Plymouth Belvedere 1967-1970 Plymouth GTX 1966-1970 Plymouth Satellite 1968-1970 Plymouth Road Runner 1970-1970 Plymouth...

Reproduction of the original shift indicator lens for various Mopar A-body and B-body models. Each indicator is manufactured in quality acrylic materials replicating the original lens. Features the letters/numbers...

Reproduction console mounting bracket set for 1966-70 Dodge and Plymouth B-Body models with manual transmission. Each set of three brackets is produced to original factory specifications and requires not additional drilling...

Reproductions of the gearshift control shaft boot, mounting flange, and gasket used on console shift cars with automatic transmission. The assembly includes an injection molded torque shaft boot, an open cell foam gasket, and...

Reproduction center console rear trim plate for Dodge and Plymouth B-Body models. Each rear trim part is die-cast, chrome-plated and then painted in the recess areas with the correct argent silver accent paint, as original...

Reproduction of the original center console top plate designed for use with 1966-68 Dodge and Plymouth B-Body models. Each top plate is manufactured in die-cast zinc, chrome-plated and painted in the recess areas with correct...

Replace the cracked or broken plastic center console body in your 1967-70 B-Body vehicle with a brand new injection molded reproduction from Classic Industries®. Note: Original door, trim plates, moldings, bull?s-eye...

Reproduction of the original center console top plate designed for use with 1966-68 Dodge and Plymouth B-Body models. Each top plate is manufactured in die-cast zinc, chrome-plated and painted in the recess areas with correct...

Reproduction center console door hinge for Dodge and Plymouth B-Body models. Each door hinge is produced in stamped steel construction and is designed to replace a damaged or missing original hinge precisely. Attaches the...

Reproduction center console rear trim plate for Dodge and Plymouth B-Body models. Each rear trim part is die-cast, chrome-plated and then painted in the recess areas with the correct black accent paint, as original for the...

Reproduction door for the center console on 1969-70 Dodge and Plymouth B-Body models. Each door is die-cast, chrome-plated and then painted in the recess areas with the correct black accent paint. The door is then finished in...

Reproduction of the original center console top plate designed for use with 1969-70 Dodge and Plymouth B-Body models. Each top plate is manufactured in die-cast zinc, chrome-plated and painted in the recess areas with correct...

Reproduction top plate for the center console on 1969-70 Dodge and Plymouth B-Body models. Each top plate is die-cast, chrome-plated and then painted in the recess areas with the correct black accent paint. Each plate is...

Reproduction center console door for Dodge and Plymouth B-Body models. Each console door is die-cast, chrome-plated and then painted in the recess areas with the correct argent silver accent paint, as original for the 1966-68...

Reproduction of the original shifter boot and bezel designed for use on 1966-74 Mopar A, B, and E- body models. Each shift boot is designed and manufactured in EPDM molded rubber compound replicating the original in fitment...

Replace the discolored or deteriorated center console carpet located on the side panels of the console with reproduction panels from Classic Industries. Originally, each console had side panels that were made from fully bound...

Reproduction center console rear trim plate for Dodge and Plymouth B-Body models. Each rear trim plate is die-cast, chrome-plated, painted black in the correct accent areas, and then polished to a bright shine. It acts as a...

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

1970-1970 Dodge Coronet (500) 1970-1970 Dodge Super Bee 1970-1969 Dodge Charger (Daytona) 1970-1970 Plymouth Belvedere 1970-1970 Plymouth GTX 1970-1970 Plymouth Satellite 1970-1970 Plymouth Road Runner 1970-1970 Plymouth...

Reproduction console mounting bracket set for 1966-70 Dodge and Plymouth B-Body models with automatic transmission. Each set of three brackets is produced to original factory specifications and requires not additional...

Reproduction of the original upper "Pistol Grip" shift boot bezel for use on 1970-74 Mopars with manual transmissions. Add new life to your Mopar's interior by replacing the original upper boot bezel of the Hurst Pistol-Grip...

Replace the missing or deteriorated console side cover in your 1966-70 B-body vehicle with a brand new reproduction cover from Classic Industries®. Originally, the side cover was manufactured of fiberboard and covered...

Reproduction of the original console rear trim bracket designed for use on 1966-70 Mopar B-Body models. Each bracket is a stamped replication of the original in design and appearance. This bracket is used to attach the rear...

Replace the deteriorated or missing original upper shift boot of your Hurst Pistol-Grip shifter-equipped Mopar B or E-Body to seal the area around the shift mechanism the way the factory intended. For use on models without...

Restore the woodgrain on your 1968-70 B-body console with a brand new set factory style replacement woodgrain inserts from Classic Industries®. If your console plates are in good condition, but the woodgrain is...

Replace the cracked or broken plastic center console body in your 1967-70 B-Body vehicle with a injection molded reproduction from Classic Industries®. Mopar Authentic Restoration™ Product Note: Original door,...

Designed for large hole shifter installations, the Hurst Super Boot and Plate is for use with Competition/Plus Shifters. Measures 7-3/4" x 8-3/4", and comes complete with boot, chrome ID plate and all mounting hardware.

1970-1970 Dodge Coronet (500) 1970-1970 Dodge Super Bee 1970-1970 Plymouth Belvedere 1970-1970 Plymouth GTX 1970-1970 Plymouth Satellite 1970-1970 Plymouth Road Runner 1970-1970 Plymouth Superbird

Reproduction of the clip used to attach the side trim to the center console on 1966-70 Dodge and Plymouth B-Body models. Sold individually. Used to attach moldings # MB15104 and MB15105 to the console. Use as required. Mopar...

Replace the missing or deteriorated console side cover in your 1968-70 Mopar B- Body model with this fiberglass after market replacement. Originally, the side cover was manufactured of fiberboard and covered with a carpeted...

Reproduction of the original console shift plate slider designed for 1966-76 Mopar A-Body, and 1966-70 B-Body models. Manufactured in ABS plastic to original specifications. Replace the old or worn out shift plate silder in...

Replace the glove box or center console lock assembly in your 1962-76 Mopar muscle car with this authentic reproduction of the original lock and key assembly. This fully assembled lock assembly features a die-cast lock body,...