Plymouth Caravelle Parts - Brake Tools

Professional Mechanics Tool For Measuring Piston Depth On Master Cylinders.

This heavy duty brake spring tool will remove springs installed through a hole.

These pliers can be used on many domestic vehicles with an emergency brake cables at the rear wheels. Works on drum brake and disc applications, quick and easily pushes the emergency brake cable out the spring/connector for...

These pliers can be used on many domestic vehicles with an emergency brake cables at the rear wheels. Works on drum brake and disc applications, quick and easily pushes the emergency brake cable out the spring/connector for...

These pliers can be used on many domestic vehicles with an emergency brake cables at the rear wheels. Works on drum brake and disc applications, quick and easily pushes the emergency brake cable out the spring/connector for...

The Handy Packer works on bearings up to 3-1/2" o.d. The grease stays in the tool cavity, not on your hands. To pack a bearing, place the bearing on the piston. Press down on the cap until the old grease is forced out and the...

Bend 3/16", 1/4", 5/16" and 3/8" copper or steel tubing. This tool makes tight bends without the tube collapsing. Roller adapters are included for each tubing size. Place tubing between the adapter and studs and squeeze the...

Designed with proven features from the renowned Mityvac pumps, this Professional Model Automotive Kit delivers both vacuum and pressure. The dual capability of the new Mityvac® hand pump combines two pumps into one. It...

Speed up star wheel adjusting on drum brakes by simply inserting the tool through the slot in drum backing plate. A different angle at each end adapts to many various models.

Replacement wheel cylinder stones for X265 hone. Set of 3.

This tool makes bends easy without the tube collapsing. Tube benders can be used for bending copper or steel tubing such as brake, fuel, transmission cooler or power steering lines. Features and Benefits: Bends 3/16", 1/4",...

Bleed your hydraulic brake system like the pros with this high-capacity brake bleeder system! The Power Bleeder features a large, hand-pump pressurized reservoir that holds up to 2 quarts of brake fluid so you can flush the...

Removes and installs shoe return springs on most drum brakes. Socket end removes spring from anchor stud. Notched end installs spring on anchor. Pliers remove and install the return spring to outside of brake shoe.

Hones drum brake wheel cylinders and disc brake calipers from 3/4" to 2-1/2" (19mm to 64mm) diameter. Sleeve makes insertion in cylinder easy and protects stones when not in use. Use with variable speed drill. Wheel...

Loosen the bleeder screw and fill with brake fluid. Pump the brakes until the hose is free of bubbles. Everything is included to quickly bleed brakes with no mess. Plastic bottle collects discharged fluids. Complete...

Replacement stones for Y10400 hone.

The standard tool will remove springs that are set over a post.

Replacement caliper stones for X265 hone. Set of 3.

This wrench will ensure that you don?t strip the bleeder nuts on your calipers or cylinders.

Special abrasive pads polish the brake caliper or wheel cylinder without cutting. Controlled pressure and flexible driver give good stability and speed. Stones are 1 long. Range 1-1/2" to 3-1/8" (38.1mm to 79.3mm). For...

The pistol grip ratcheting action and the fast acting plunger compress disc brake pistons in seconds. This makes brake pad replacement a snap.

Bleed Brakes Quickly, Simply & Cleanly! The Mityvac® Brake Bleeding Kit may be used on virtually all hydraulic systems as well as most ABS systems. It's a rugged, low cost professional tool which enables one person to...

This unique tool makes changing disc brake pads easy. The tool compresses the disc brake piston for easy installation of pads.