and Performance Parts and Accessories

Plymouth Colt Parts - Fuel System
Classic Industries offers a wide selection of Fuel System Components for your Plymouth Colt. Classic Industries offers Plymouth Colt Accelerator Components, Plymouth Colt Carburetor Components, Plymouth Colt Carburetors, Plymouth Colt Chemicals & Additives, Plymouth Colt Filters, Lines & Hoses, Plymouth Colt Fuel Caps & Doors, Plymouth Colt Fuel Injection, Plymouth Colt Fuel Pressure Regulators, Plymouth Colt Fuel Pumps, Plymouth Colt Fuel Tank Hardware, and Plymouth Colt Fuel Tanks.
- Accelerator Components
- Carburetor Components
- Carburetors
- Chemicals & Additives
- Filters, Lines & Hoses
- Fuel Caps & Doors
- Fuel Injection
- Fuel Pressure Regulators
- Fuel Pumps
- Fuel Tank Hardware
- Fuel Tanks
-
Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.
- Add to Cart
- Add to Wishlist
-
Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.
- Add to Cart
- Add to Wishlist
-
Three piece universal billet aluminum pedal kits from Billet Specialties. This kit comes with easy to use drill templates and the necessary stainless steel hardware for installation. Made in USA Dimensions: Gas Pedal -...
- Add to Cart
- Add to Wishlist
-
Billet Specialties aluminum in-line fuel filters for carbureted applications. 4 1/2" x 1 3/8" housing with 3/8" hose barb fittings Note: Not for use with fuel injection systems.
- Add to Cart
- Add to Wishlist
-
Billet Specialties aluminum in-line fuel filters for carbureted applications. 4 1/2" x 1 3/8" housing with -6AN hose fittings Note: Not for use with fuel injection systems.
- Add to Cart
- Add to Wishlist
-
Three piece universal billet aluminum pedal kits from Billet Specialties. This kit comes with easy to use drill templates and the necessary stainless steel hardware for installation. Made in USA Dimensions: Gas Pedal -...
- Add to Cart
- Add to Wishlist
-
Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...
- Add to Cart
- Add to Wishlist
-
Universal style accelerator throttle rod designed for use on various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the...
- Add to Cart
- Add to Wishlist
-
Finally an affordable high-performance race carburetor! PROFORM?s Race Series Carburetor is hand assembled in Bowling Green, Kentucky utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks,...
- Add to Cart
- Add to Wishlist
-
Finally an affordable high-performance race carburetor! PROFORM?s Race Series Carburetor is hand assembled in Bowling Green, Kentucky utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks,...
- Add to Cart
- Add to Wishlist
-
The Perfect Flow Fuel Delivery System is a fuel pump system designed to support up to 1000 horse power in naturally aspirated applications or it can be configured as a main and secondary pump to support up to 500 horse power...
- Add to Cart
- Add to Wishlist
-
Finally an affordable high-performance race carburetor! PROFORM?s Race Series Carburetor is hand assembled in Bowling Green, Kentucky utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks,...
- Add to Cart
- Add to Wishlist
-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...
- Add to Cart
- Add to Wishlist
-
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
- Add to Cart
- Add to Wishlist
-
These billet line clamps are great for cleaning up your engine bay and securing your metal plumbing lines. Clamps are manufactured from 6061 aluminum and feature black Delrin inserts. Inserts feature a 3/16" pilot hole that...
- Add to Cart
- Add to Wishlist
-
Correct replacement fuel hose clamp for use on various models with 5/15" or 3/8" clamps. Measures .57-.63 flat wound spring clamp. Silver Dip Spin Coating. Sold individually. Use as required.
- Add to Cart
- Add to Wishlist
-
Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...
- Add to Cart
- Add to Wishlist
-
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
- Add to Cart
- Add to Wishlist
-
Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA
- Add to Cart
- Add to Wishlist
-
Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA
- Add to Cart
- Add to Wishlist
-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...
- Add to Cart
- Add to Wishlist
-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...
- Add to Cart
- Add to Wishlist
-
Express sleeving is a combination of a high-temperature insulation material and a highly reflective Mylar foil with a Velcro closure. The sleeving is designed to simply and effectively protect wire, hoses, and cables from...
- Add to Cart
- Add to Wishlist
-
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
- Add to Cart
- Add to Wishlist
-
Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...
- Add to Cart
- Add to Wishlist
-
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
- Add to Cart
- Add to Wishlist
-
This Lokar billet aluminum drive-by-wire electronic throttle control assembly is preprogrammed specifically for Ford Coyote 5.0L crate engines and will accept both factory and aftermarket wiring harnesses. Made in USA ...
- Add to Cart
- Add to Wishlist
-
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
- Add to Cart
- Add to Wishlist
-
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
- Add to Cart
- Add to Wishlist
-
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
- Add to Cart
- Add to Wishlist
-
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
- Add to Cart
- Add to Wishlist
-
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
- Add to Cart
- Add to Wishlist
-
These high-quality small block Chevrolet fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock™ Single-Feed or Dual-Feed fuel inlet kits. These hose kits...
- Add to Cart
- Add to Wishlist
-
These high-quality big block Chevrolet fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock™ Single-Feed or Dual-Feed fuel inlet kits. These hose kits are...
- Add to Cart
- Add to Wishlist
-
The AVS2 Series is the next generation in Edelbrock carburetors. The AVS2 features annular flow primary boosters with a new calibration for improved off idle and cruising performance. The annular flow booster design delivers...
- Add to Cart
- Add to Wishlist
-
OER® Authorized reproduction of the carburetor rod to accelerator rod clip for various 1962-82 GM models. Correct style rod clip used on various GM vehicles. Fits 5/32" rod diameter, RH, 11/64" ID. Note: For LH offset...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis...
- Add to Cart
- Add to Wishlist
-
Driven Defender + Booster raises the octane in unleaded fuels, reduces valve seat wear and protects against the corrosion deposits common with today?s gasoline. Like Driven Carb Defender and Injector Defender Fuel Additives,...
- Add to Cart
- Add to Wishlist
-
This set includes a selection of metering rods, jets, and step up springs that allow fine tuning and calibration of Edelbrock Performer carburetors for mildly to extremely built motors, especially motors with performance...
- Add to Cart
- Add to Wishlist
-
This set includes a selection of metering rods, jets, and step up springs that allow fine tuning and calibration of Edelbrock Performer carburetors for mildly to extremely built motors, especially motors with performance...
- Add to Cart
- Add to Wishlist
-
The NotcHead fastening system will keep your braidedl lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps for a clean and simple...
- Add to Cart
- Add to Wishlist
-
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 3...
- Add to Cart
- Add to Wishlist
-
NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...
- Add to Cart
- Add to Wishlist
-
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
- Add to Cart
- Add to Wishlist
-
Driven's Carb Defender Fuel Additive is specifically formulated to protect against ethanol corrosion and induction deposits. Special corrosion inhibitors work to prevent expensive repairs and diminished performance caused by...
- Add to Cart
- Add to Wishlist
-
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
- Add to Cart
- Add to Wishlist
-
Stainless steel GM designed dual springs for use with Lokars SR4001 bracket (sold separately). Made in USA
- Add to Cart
- Add to Wishlist
-
These billet line clamps are great for cleaning up your engine bay and securing your metal plumbing lines. Clamps are manufactured from 6061 aluminum and feature black Delrin inserts. Inserts feature a 3/16" pilot hole that...
- Add to Cart
- Add to Wishlist
-
Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...
- Add to Cart
- Add to Wishlist
-
Performance EFI regulator designed for medium to high horsepower applications. This regulator features Aeromotive?s high-flow design, superb pressure control and legendary durability. On the street or at the track, this...
- Add to Cart
- Add to Wishlist
-
This Bypass Regulator was designed for use when converting from fuel injection to carburetion using the EFI pump in a carbureted application. This regulator is perfect for naturally aspirated or 'blow-through' supercharged...
- Add to Cart
- Add to Wishlist
-
This dual purpose, universal regulator for EFI or Carbureted street/strip applications features pressure adjustable from 3 to 20 PSI with standard spring, (installed) or from 20 to 60 PSI with high pressure spring...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...
- Add to Cart
- Add to Wishlist
-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...
- Add to Cart
- Add to Wishlist
-
Universal flip top aluminum gas cap for custom applications. Made with polished aluminum components and assembled with brass hardware. Perfect for relocating your gas tank filler or making a Shelby Cobra or Eleanor tribute....
- Add to Cart
- Add to Wishlist
- Accelerator Components
- Carburetor Components
- Carburetors
- Chemicals & Additives
- Filters, Lines & Hoses
- Fuel Caps & Doors
- Fuel Injection
- Fuel Pressure Regulators
- Fuel Pumps
- Fuel Tank Hardware
- Fuel Tanks
- AC & Heater
-
AC & Heater
- AC Parts (21)
- AC Systems (1)
- Controls (9)
- Heater Parts (2)
- See All
- Body Components
-
Body Components
- Body Mounts (16)
- Bumper Compone…(54)
- Convertible (10)
- Door Components (19)
- See All
- Body Panels
-
Body Panels
- Body Repair Supp…(53)
- Doors (1)
- Hood (4)
- Rocker Panels (1)
- See All
- Brakes
-
Brakes
- Brake Accessories (6)
- Brake Chemicals (19)
- Brake Hardware (3)
- Brake Lines & Ho…(11)
- See All
- Car Care
-
Car Care
- Accessories (30)
- Car Covers (3)
- Cleaning Supplies (176)
- Front End Masks &…(1)
- Cooling System
-
Cooling System
- Additives (6)
- Electric Fan (114)
- Fan Components (60)
- Gaskets & O-rings (1)
- See All
- Dash Components
-
Dash Components
- Aftermarket Dash…(2)
- Cigarette Lighte…(16)
- Clusters (11)
- Dash Controls (1)
- See All
- Electrical & Wiring
-
Electrical & Wiring
- Batteries (23)
- Charging System (16)
- Horns (1)
- Starters (2)
- See All
- Engine
-
Engine
- Air Cleaners &…(145)
- Emission Control (1)
- Engine Components (2)
- Engine Dress Up (17)
- See All
- Exhaust
-
Exhaust
- Hardware (18)
- Manifold Hardware (32)
- Manifolds (7)
- Mufflers & Pipes (170)
- Exterior Trim
-
Exterior Trim
- Grill Components (25)
- Moldings (108)
- Fuel System
-
Fuel System
- Accelerator Comp…(28)
- Carburetor Comp…(215)
- Carburetors (89)
- Chemicals & Addit…(9)
- See All
- Lifestyle Products
-
Lifestyle Products
- Apparel (108)
- Gift Certificates (7)
- Home & Office De…(63)
- Jewelry (5)
- See All
- Literature, Multimedia
-
Literature, Multimedia
- Literature (211)
- Software (2)
- Video (17)
- Steering
-
Steering
- Power Steering Sy…(5)
- Rack & Pinion (1)
- Steering Box Com…(24)
- Tie Rod & Sleeves (1)
- See All
- Suspension
-
Suspension
- Chassis Hardware (13)
- Front Suspension (1)
- Shocks & Struts (5)
- Springs (3)
- See All
- Tools
-
Tools
- Auto Body Tools (54)
- Brake Tools (23)
- Cleaning Tools (3)
- Creepers & Seating (4)
- See All
- Transmission
-
Transmission
- Automatic Trans (53)
- Clutches & Parts (1)
- Fluids & Additives (1)
- Manual Trans (110)
- See All
- Wheel & Tire
-
Wheel & Tire
- Accessories (23)
- Hardware (56)
- Tires (11)
- Wheel Covers (6)
- See All
America's First Choice in Restoration and Performance Parts and Accessories