Plymouth Cuda Parts - Weatherstrip

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...

This hook tool has a small, round steel ball on the end. Once the steel ball is inserted down into the rubber gasket, it is very difficult for it to come out. If it should slip out of the gasket, there is less of a chance you...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

Starter Cable Boot for 1954-1960 Oldsmobile 88, Dynamic, Super, Fiesta and 98 models, Also 1932-1953 Buick models and other various 1954-1972 GM models as required.

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

OER reproduction retaining pin used by GM for various applications. Manufactured from injection molded plastic as original, this retaining pin measures M4.2 x 1.41 x 15 and fits a 4.75MM dia. hole. Sold individually. Use as...

Professional windshield removal tool for all vehicle applications. Features an aluminum handle with diamond cut pattern for added grip. Heavy duty braided wire secures the pull handle to the cutting blade. Large durable...

The lockstrip insert tool is is specifically designed for self-sealing two-piece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel.

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Precisions's weatherstrip lubricant significantly reduces friction, thereby reducing the installation force required to assemble parts and fittings. This is a non residue lubricant, once it dries it becomes invisible.

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Use the rope in tool when working with rubber gasket set glass. The unique counter-grip plastic handle injects the rope through its stem as it is pulled around the gasket. There is plenty of enough durable rope to fit around...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Reproduction of the original screws designed to attach the weatherstrip channels for 1967-69 Camaro and Firebird coupe or convertible models. These screws feature the correct style large head that is required for mounting...

Factory-style replacement hood side stop bumper for various 1968-71 Mopar B-Body models including Charger, Coronet, Belvedere, Road Runner, Satellite and Superbird models. Designed to factory specifications to correctly...

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal wire...

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

Reproduction roof rail weatherstrip channel screw set for 1970-81 Camaro, Firebird, and other various GM models. These screws feature the correct style large head that is required for mounting coupe weatherstrip channels. #8...

Reproduction of the original fender skirt rubber seal designed for use on various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment an appearance....

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

3M auto sealer is a black flowable product for installing weatherstrip that requires glue, or repairing leaks between glass and rubber or metal surfaces. Permanently seals windshields, back glass and other places where...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Reproduction of the original style outer door and quarter window windowfelt weatherstrip for use with 1970 Plymouth Barracuda and Cuda convertible models. Includes the outer window windowfelts for the front door glass and...

Replacement heater box seal set for models equipped with factory AC. Deteriorated seals can allow water and other elements to leak into the vehicle. Replace your old original brittle seals with this new quality set. Made in...

Reproduction of the original weatherstripping designed for use on 1970-71 Mopar E-Body convertibles. Each piece is manufactured in quality E.D.P.M. rubber material and replicates the original for an authentic appearance and...

Reproduction of the original factory-style replacement master cylinder gasket designed for use on mosr models with or without power brakes. Each gasket replicates the original in fit and functionality. Fits the various models...

Reproduction of the original windshield header weatherstripping designed for use on 1970-71 Mopar E-Body convertibles. Each header seal manufactured in quality E.D.P.M. rubber material and replicates the original for an...

Reproduction of the original style rubber outside door lock cylinder gaskets designed for use on the various models listed below. Each gasket is manufactured to original specifications in gray color and matches the original...

This replacement hood to radiator seal is manufactured to factory specifications to replace your existing warped or damaged original. Mounting clips included. Applications: 1970 AAR 'Cuda with fiberglass hood 1970 T/A...

Don't forget the small details when repainting your vehicle, like these rear spoiler gaskets. What your Mopar turns out like is all in the details. Made in USA Sold as a pair.

Reproduction splash shield clip set for all 1962-74 Mopar models. These clips were used on various headlamp splash shields, inner fender splash shields and other splash shields. Manufactured out of stainless steel.

Reproduction restoration gasket kit for 1970-74 Mopar E-Body models. These gaskets are manufactured to original specifications for proper fit and appearance. Set Contains These Gaskets: Steering Column Master Cylinder ...

When doing a full restoration it is a very good idea to replace all of body plugs under your vehicle. Plugs are used to seal off bolts under your vehicle to prevent dirt from entering. Set contains the correct size and style...

Replacement inner fender splash shields for all 1971-74 Mopar E-Body models. These shields are mounted to the inner fenders, are manufactured out of masticated rubber and includes stainless mounting hardware. Made in USA

Reproduction of the original factory-style replacement power brake booster to firewall gasket for use on models with power brakes. Each gasket is die-stamped to original specifications for a perfect fit. Sold individually. ...

These replacement tail lamp gaskets are laser cut to original specifications making them the most correct on the market. Each set contains the necessary gaskets for both tail lamps on one vehicle. Mad e in USA

These replacement side marker lamp gaskets are laser cut to original specifications for a proper fit. Made in USA Set includes enough pieces for both sides of the vehicle. Applicati ons: 1972-76 A-Body all models 1972-74...

Replacement wiper pivot gaskets for all 1971-74 Mopar B-Body and 1970-74 E-Body models. These gaskets are manufactured to the correct original shape to keep water from leaking into the vehicle. Made in USA

These replacement tail lamp gaskets are laser cut to original specifications making them the most correct on the market. Each set contains the necessary gaskets for both tail lamps on one vehicle. Mad e in USA

Reproduction of the original steering column seal designed for use on 1970-74 Mopar E-body models. Each steering column seal is manufactured to exact dimension using correct material for an authentic replacement. Will...

Reproduction restoration gasket kit for 1970-74 Mopar E-Body models. These gaskets are manufactured to original specifications for proper fit and appearance. Set Contains These Gaskets: Steering Column Master Cylinder ...

Factory-style replacement rubber bumper for 1970-74 Mopar E-Body models. This bumper is for both the glovebox door and the fuel door. Sold individually. Applications: 1970-74 Challenger 1970-74 Barracuda 1970-74 'Cuda

This replacement firewall gasket set for all 1971-74 Mopar B-Body and 1970-74 E-Body models is manufactured to original specifications for a proper fit and appearance. Each set comes with a variety of firewall gaskets...

Reproduction of the grommet for the distributor wire. This grommet was originally equipped on all Mopar vehicles with points ignition and a distributor.

This is a factory-style replacement license lamp lens gasket. Made in USA

This replacement firewall gasket set for all 1971-74 Mopar B-Body and 1970-74 E-Body models is manufactured to original specifications for a proper fit and appearance. Each set comes with a variety of firewall gaskets...

Replacement inner fender splash shields for all 1970 Mopar E-Body models. These shields are mounted to the inner fenders, are manufactured out of masticated rubber and includes stainless mounting hardware. Made in USA