Plymouth Duster Parts - Hoses and Parts

AutoMeter coolant hose adapter kits for mounting gauge senders or probes directly into your radiator hose. Ideal for vehicles with limited access to water passage ports on the engine. Made in USA Manufactured from aluminum...

AutoMeter coolant hose adapter kits for mounting gauge senders or probes directly into your heater hose. Ideal for vehicles with limited access to water passage ports on the engine. Made in USA Manufactured from solid...

AutoMeter coolant hose adapter kits for mounting gauge senders or probes directly into your heater hose. Ideal for vehicles with limited access to water passage ports on the engine. Made in USA Manufactured from solid...

AutoMeter coolant hose adapter kits for mounting gauge senders or probes directly into your radiator hose. Ideal for vehicles with limited access to water passage ports on the engine. Made in USA Manufactured from aluminum...

The NotcHead fastening system will keep your braidedl lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps for a clean and simple...

Used on 13/16" O.D. hose.

OEM-Style Corbin 5/8" hose clamp. Most commonly used for 1955-1968 5/8" heater hose. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part...

ABS plastic clip designed for use on many GM applications. This push in style clips is used for applications listed below. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...

This hose bracket is designed to secure a pair of hoses to the body or frame to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance.

Vintage Air trinary switch kit for beadlock crimp hoses. Vintage Air trinary swithes feature low and high pressure compressor clutch cut-off functions plus an electric fan engagement signal at 254 psi. The low pressure...

Reproduction of the original 1966-1982 WITTEK MFG tower style hose clamp designed for use on various 1966-1982 GM models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most...

Vintage Air O-ring adapter fitting for Sanden / Sankyo style SD7B10 "Peanut" compact AC compressors. This aluminum adapter will bolt directly to the suction inlet flange, converting it to -10AN male thread. Sold each.

Vintage Air O-ring adapter fitting for Sanden / Sankyo style SD7B10 "Peanut" compact AC compressors. This aluminum adapter will bolt directly to the discharge outlet flange, converting it to -8AN male thread. Sold each.

Protect your cooling system with this heater core coolant filter. Featuring heavy duty solid brass construction, this filter is installed inline directly with the heater hose ahead of the heater core to prevent dirt and...

Correct style side screw clamp used on various GM vehicles. Most commonly used on 1958-65 vehicles on water pump bypass hoses. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Correct style side screw clamp used on various GM vehicles. Most commonly used on 1958-65 vehicles on water pump bypass hoses. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Reproduction of the original 1966-1982 WITTEK MFG tower style hose clamp designed for use on various 1966-1982 GM models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most...

OEM-Style Corbin 9/16" hose clamp. Manufactured for the most discriminating restorer in mind. Most commonly used for fuel and vacuum hose. Correct hardware can make any installation job easier. Replace your missing or...

OEM-Style Corbin 3/8" hose clamp. Manufactured for the most discriminating restorer in mind. Fits 3/8" id hose. Most commonly used for fuel and vacuum hose. Correct hardware can make any installation job easier. Replace your...

OEM-Style Corbin 3/4" hose clamp. Manufactured for the most discriminating restorer in mind. Fits 3/4" I.D. hose. Most commonly used for 1957-1968 3/4" heater hose. Correct hardware can make any installation job easier....

Quality replacement style heater hose. This hose can be used for nearly all applications.

Quality replacement style heater hose. This hose can be used for nearly all applications.

Ideal replacements for worn or rotted heater hoses. Non-corrosive stainless steel construction conforms to tight bends and holds shape indefinitely. Rated for high temperatures and high pressure, this is the ultimate heater...

Reproduction of the original 1959-1972 WITTEK MFG tower style hose clamps. Includes all eight clamps needed to completely replace radiator and heater hose clamps. This style tower clamp was originally used from 1959-1972,...

Ideal replacements for worn or rotted heater hoses. Non-corrosive stainless steel construction conforms to tight bends and holds shape indefinitely. Rated for high temperatures and high pressure, this is the ultimate heater...

Replacement expansion valve that is mounted at the evaporator inlet and regulates the refrigerant going into the evaporator. Applications: A-Body 1965-74 Valiant 1965-74 Dart 1965-69 Barracuda 1970-74 Duster 1971-74 Scamp...

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 2936392 / 2837398 Mopar Aut hentic...

This green HBNR o-ring set will replace any damaged or missing o-rings. Each set will fit all 1963-76 models with air conditioning, and will also include a lube tube. Made in USA Applic ations: A-Body 1963-76 Valiant...

Replacement hose clamp sets for all 1971-74 big block and Hemi models. These are correct spring clamps. Set includes: Four radiator clamps Ten heater hose clamps Applications: A-Bod y 1971-74 Valiant with big block or Hemi...

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-3/4" length with 1/2"...

When you need to fabricate specially-sized hoses, this easy-to-use bubble crimping kit gets the job done at home with professional results. Includes the crimper, crimping dies for #6 (3/8"), #8 (1/2"), #10 (5/8") , #12...

Reproduction of the original heater hose tie strap for all 1960-76 A. B and E models. This strap has various purposes, most commonly it was used to hold the heater hoses together. Use as required. Manufactured from correct...

Reproduction heater hose bracket for all 1969-74 big block models with AC. This bracket bolts to the alternator triangle support bracket. Manufactured from correct gauge steel and thermo-plastic coated. Made in USA

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 2963402 / 1343689 Mopar Aut hentic...

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 3441274 / 2837398 Mopar Aut hentic...

This stainless steel fitting threads into the water pump or intake manifold to provide heater hose attachments. Includes: 3/4" hose ID, 1-3/4" length with 1/2" pipe thread Made in USA

Reproduction heater tube plate to firewall gasket for 1960-76 A-Body models. This foam gasket installs between the heater tube plate and the firewall. Applications: A-Body 1964-69 Barracuda 1970-76 Duster 1971-76 Scamp...

Reproduction of the original hose clamps designed for use on various 1970 Dodge and Plymouth small block V8 models. These clamps are manufactured to replicates the original in appearance and functionality. Restoration correct...

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Original style heater hose fittings for 1970-76 Mopar models. Patterned after original fittings and zinc plated to prevent corrosion. One kit required per vehicle. Set includes: 1/2" hose ID, 1-15/16" length with 1/4" pipe...

This new line fastening system will keep your soft lines (heater hose, battery cables, AN lines, etc.) secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of...

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-3/4" length with 1/2"...

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 860457 / 2936402 Mopar Auth entic...

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Original style heater hose fittings for 1970-76 Mopar models. Patterned after original fittings and zinc plated to prevent corrosion. One kit required per vehicle. Set includes: 1/2" hose ID, 1-15/16" length with 1/4" pipe...

This new line fastening system will keep your soft lines (heater hose, battery cables, AN lines, etc.) secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of...

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Set includes: 5/8" hose ID, 1-3/4" length with...

This new line fastening system will keep your soft lines (heater hose, battery cables, AN lines, etc.) secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of...

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: (2) 5/8" hose ID, 1-3/4" length with...

Replacement hose clamp sets for all 1970 big block and Hemi models. This gold/copper colored spring clamp set includes four radiator clamps and four heater hose clamps. Set includes: Two radiator clamps Three heater hose...

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-3/4" length with 1/2"...

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 3/4" hose ID, 1-5/8" length with 1/2"...

Replacement blower motor vent tube for models with air conditioning. Made in USA Applications: 1964-72 Valiant 1964-72 Dart 1964-69 Barracuda 1970 -72 Duster 1971-72 Scamp 1969-72 Swinger 1971-72 Demon

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-3/4" length with 1/2"...

This stainless steel fitting threads into the water pump or intake manifold to provide heater hose attachments. Includes: 3/4" hose ID, 2-7/8" length with 1/2" pipe thread Made in USA

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-1/2" length with 1/2"...

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-1/2" length with 1/2"...