Plymouth Cuda Parts - Hardware

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA

Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Hooker collector rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Six 9" straps...

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9"...

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Why bolt up your new side pipe exhaust system with those rusty old clamps you?ve got laying around. Finish off your exhaust system with these stylish chrome clamps. Sold individually.

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

1966-70 Mopar B-body exhaust loor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket...

1970-73 Mopar E-body exhaust floor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket...

Correct replacement style Walker exhaust clamp for use with most applications requiring 2-1/8" clamp. Please check your applications carefully before ordering.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

These flanges connect the exhaust manifold to the head pipe. Flanges made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required.

These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. No te:...

These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. Note:...

This resonator floor pan support bracket is made from steel and mounts to the floor pan to provide a place to attach the resonator hanger. Hardware is included. Applications: 1970-74 Barracuda, 'Cuda and Challenger

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Replacement muffler straps for 1970 AAR 'Cuda and T/A Challenger models. These straps attach to each of the mufflers and secure them to the floor hangers.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

These flanges connect the exhaust manifold to the head pipe. Flanges made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required.

If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

This 3 piece flange gasket set fits between the heat tubes on Mopar models equipped with Hemi engine. Made of asbestos.

Replacement header flange gaskets for models equipped with a small block LA engine. Eliminate that annoying ticking sound from your header flange! This header flange gasket is made out of graphite foil with a stainless metal...

Reproduction of the original exhaust tip hanger bracket for 1972-74 Dodge and Plymouth E-Body models. This bracket bolts to the rear frame rail and supports the exhaust hanger. Each bracket features correct bolt hold...

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Copper-Seal gaskets use "dead-soft" solid copper for extreme heat applications such as turbo-charged vehicles. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs. Gasket thickness is .075

These gaskets seal exhaust manifolds to the cylinder heads. These Copper-Seal gaskets use "dead-soft" solid copper for extreme heat applications such as turbo-charged vehicles. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

If you demand originality for your vehicle, don't settle for anything less than this complete set of OE-type bolts to mount your exhaust manifolds.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds. Applications: 1968-74 Coronet 1968-74 Super Bee ...

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.

These tail pipe support hangers bolt to the floor pan brackets that are mounted above the resonators. Will fit all 1970 Barracuda and Challenger models. Made in the USA.

This is the right side hanger mounted up by the shock absorber on most B and E-Body applications. Will fit 1971-74 B-Body and 1971-73 E-Body models.

This is a universal connector that can be used in various locations for the exhaust system. Measures 2-1/2" inner diameter, and includes mounting bolts. Each set is sold in pairs, enough to do a vehicle with dual exhaust.