Plymouth Cuda Parts - Suspension

Adjust vehicle height at the push of a button while maintaining balanced air springs.  RidePro-X tunes air suspension for proper handling and world-class ride quality by way of sophisticated pressure and height...

Adjust vehicle height at the push of a button while maintaining balanced air springs.  RidePro-X tunes air suspension for proper handling and world-class ride quality by way of sophisticated pressure and height...

In case you lost or just need a jam nut for your QA1 coilovers we now have them.

In case you lost or just need a jam nut for your QA1 coilovers we now have them.

RidePRO-X digital air suspension control system  5 Gallon Sophisticated pressure and height algorithms tune air spring rates for proper handling and world-class ride quality. A sleek and stealthy 3-position Control Module...

RidePRO-X digital air suspension control system  5 Gallon Sophisticated pressure and height algorithms tune air spring rates for proper handling and world-class ride quality. A sleek and stealthy 3-position Control Module...

RidePRO-X digital air suspension control system  5 Gallon Sophisticated pressure and height algorithms tune air spring rates for proper handling and world-class ride quality. A sleek and stealthy 3-position Control Module...

RidePRO-X digital air suspension control system  3 Gallon Sophisticated pressure and height algorithms tune air spring rates for proper handling and world-class ride quality. A sleek and stealthy 3-position Control Module...

This sway bar is a great option to add to your gStreet front suspension systems or to add as an enhancement to your stock suspension. Made from heat treated alloy steel, this is the finest sway bar for your classic. Made in...

RidePro-HP ride height sensors upgrade your existing RidePro-X pressure-based system. The ultimate air suspension management system measures BOTH pressure and ride height. With the addition of RidePro-Hp ride height and...

Correct replacement self locking nuts used on various GM vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Mustang II Coil Spring Ride Height Adjuster Kit.

Black phosphate coated hex head bolts with washer. Measures 3/8-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck, among...

Universal Spring Isolators - Red. Made of superior HYPERFLEX polyurethane material. Saves replacing again and again lasting from 3 to 10 times longer than rubber isolators. Pad Details Inside Diameter - 2-1/8" Lip Outside...

Universal Polyurethane Sway Bar End Link Grommets and Washers Universal - Set of 8 Inner Diameter - 3/8" Nipple Outer Diameter - 11/16" Outer Diameter - 1-1/8" Height - 0.725"

Fits 25mm (1 Inch) Sway Bars Only

Fits 25mm (1 Inch) Sway Bars Only

Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 4 speed nuts without...

Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems that don't include attaching nuts. Set includes 8 speed nuts without...

This 1/4-inch x 7/16-inch steel acorn cap nut is nickel plated. Product Specifications: Steel acorn cap nut Nickel plated Thread size:1/4"-20 Hex width: 7/16" Height: 3/8"

This is a stainless steel 5/16-18x1-inch hex head cap screw that has many uses for your project vehicle.

This 1/4-inch flat stainless steel washer is for the 1/4-inch (18-8) bolt size. Product Specifications: Stainless steel commercial flat washer Bolt size: 1/4-inch Inner diameter: 9/32-inch Outer diameter: 5/8-inch...

This stainless steel 5/16-inch flat washer is for use with 18-8 fasteners. Product Specifications: Stainless steel commercial flat washer Bolt size: 5/16-inch Inner diameter: 11/32-inch Outer diameter: 3/4-inch Approximate...

This 1/4-inch stainless steel medium split lock washer is for use with 18-8 fasteners. Product Specifications: Stainless steel medium split washer Size: 1/4-inch Outer diameter: 31/64-inch Minimum thickness: .062-inch

This hex head sems tapping screw is 5/16-inch 18x3-inch and has a 5/8-inch attached washer. Product Specifications: Hex head sems tapping screw Phosphate M4.2-1.41 x 20mm (#8 x 25/32") Washer O.D.: 16mm (5/8-inch) 7mm hex...

This 5/16-inch medium split stainless steel washer is for use with 18-8 fasteners. Product Specifications: Stainless steel medium split washer Size: 5/16-inch Outer diameter: 19/32-inch Minimum thickness: .078-inch

Prothane universal style urethane sway bar bushings for classic Mustang. These firm polyurethane bushings will enhance roll bar effectiveness over mushy stock rubber bushings without compromising ride quality. They come...

Prothane universal style greasable sway bar bushings for classic Mustang. These bushings feature have a grease fitting built into the heavy duty brackets for convenient lubrication and contoured grooves molded into the...

Prothane universal style greasable sway bar bushings for classic Mustang. These bushings feature have a grease fitting built into the heavy duty brackets for convenient lubrication and contoured grooves molded into the...

Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning...

Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

This 5/16"-24 "Keps" lock washer and nut is zinc plated steel and is sold as each. Product Specifications:Keps lock washer and nut Zinc plated steel Thread size: 5/16"-24 Hex width: 1/2"

This 1/2"-13 zinc plated steel lock nut is sold as each.

Make changing the ride height on your vehicle simple with a set of thrust bearings. Each set does one pair of coil-over shocks.

HQ Series shocks offer 20 settings of rebound adjustment for drivers to tune ride quality and handling quality to their specific taste. Switch between cruising in comfort or stiffen your suspension for spirited driving. Sold...

1970-74 Mopar E-Body torque boxes are designed to add strength to your Mopar unibody in several critical areas. The factory added OEM torque boxes on the high-HP, high torque cars and convertibles. Hemi cars, six-pak cars...

These reproduction leaf spring are designed for an exact, direct replacement of the originals. Includes front bushing already installed. Sold only as a pair. Note: Shipped double oversize. No f urther discounts apply. ...

Torsion bar crossmembers trap mud and dirt inside and it weakens the area, causing complete rusting from the inside out. Deterioration reaches the socket area making it so weak it can twist and rip apart. Now the torsion bar...

These reproduction leaf spring are designed for an exact, direct replacement of the originals. Includes front bushing already installed. Sold only as a pair. Note: Shipped double oversize. No f urther discounts apply. ...

Koni Classic 4-piece front and rear shock absorber kit for 1962-74 Mopar B and E-body models. These dampers are a direct replacement, performance upgrade that will improve ride quality and performance. They are rebound...

The ends of the torsion bar crossmembers rust out next to the inner rocker. These caps correct the weakened intersection on the underside. Made in USA Sold as a pair to repair both LH and R H rails. Applications: 1970-74...

At the factory these where known as the "Hemi Boxes" or "Double Floor Plates". These components prevent torsional flex, and when combined with subframe connectors, it provides up to 20% more rigidity to the framework. Made...

Reproduction premium quality pitman arm for 1973-76 E-body models with manual steering. This is black powder coated and made to factory specifications in the U.S.A. This is the one that will add points to your restored...

These reproduction rear leaf springs are designed for an exact, direct replacement of the originals. Includes front bushing already installed. Sold only as a pair. Note: Shipped double oversize . No further discounts...

Replacement shock plug for all 1970 Mopar E-Body models. This piece installs on the trunk floor and covers the rear shock access hole. Sold individually. Two required per vehicle.

These reproduction lower leaf springs are for 1970-1/2 AAR Cuda, or T/A Challengers. These are manufactured to the correct dimensions, shape and fonts used on the original springs. Sold in pairs.

At the factory these where known as the "Hemi Boxes" or "Double Floor Plates". These components prevent torsional flex, and when combined with subframe connectors, it provides up to 20% more rigidity to the framework. Made...

Reproduction of the original front end components designed for use with 1970-72 Dodge and Plymouth B-Body models. Restore the handling of your classic and reduce front tire wear with this rebuild set. The set will renew your...

Koni Classic front shock absorbers for 1962-74 Mopar B and E-body models. These dampers are a direct replacement, performance upgrade that will improve ride quality and performance. They are rebound adjustable with vehicle...

1970-74 Plymouth Cuda Weld-in Frame Connectors. These frame rail connectors are precision CNC Machine cut and CNC bent to form a 3 sided box. When they are welded to the floorpan of the Mopar Unibody, they create a...

1970-74 Mopar front Torque Box set (Front pair only). These torque boxes are designed to add strength to your Mopar unibody in several critical areas. The factory added OEM torque boxes on the high-HP, high torque cars and...

1970-74 Mopar E-Body Core Support Stiffener. Front Lower Core Support Brace installs between the front frame rails, under the factory radiator. Can replace the factory thin sheetmetal support or can be installed on top of...

Polyurethane is impervious to deterioration from oil, grease or the elements and offers superior handling with stability. Measures 1-3/8" X 2" X 2-1/4" Made in USA Application s: A-Body 1962 Lancer 1962-76 Valiant...

This Restorer's Choice™ factory-style replacement leaf spring mount is manufactured in OE gauge steel featuring the correct contours, details and mounting points for an authentic fit and appearance. The front mount is...

Polyurethane is impervious to deterioration from oil, grease or the elements and offers superior handling with stability. Measures 1-3/8" X 2" X 2-1/4" Made in USA Application s: A-Body 1962 Lancer 1962-76 Valiant...

This Restorer's Choice™ factory-style replacement leaf spring mount is manufactured in OE gauge steel featuring the correct contours, details and mounting points for an authentic fit and appearance. The front mount is...

You bought a bushing set and now you need the sway bar link hardware. This set includes the bolts, nuts, washers, and spacers you need to complete the job. These are Stainless Steel Made in USA Applications: A-Body...

Air Suspension System for 70-74 Mopar "E" Body. Includes front HQ Series Shockwaves, upper StrongArms, rear HQ Series Shockwaves and Bolt-On 4 Link.

The Alterktion Street/Handling Front Suspension Package does more than save weight and add clearance. It uses precise geometry for optimum control on pothole-covered city streets, winding country roads, and even the road...