Plymouth Duster Parts - Hardware

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA

Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Hooker collector rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Six 9" straps...

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9"...

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Why bolt up your new side pipe exhaust system with those rusty old clamps you?ve got laying around. Finish off your exhaust system with these stylish chrome clamps. Sold individually.

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

1966-70 Mopar B-body exhaust loor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket...

1970-73 Mopar E-body exhaust floor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket...

Correct replacement style Walker exhaust clamp for use with most applications requiring 2-1/8" clamp. Please check your applications carefully before ordering.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

These flanges connect the exhaust manifold to the head pipe. Flanges made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required.

This 3 piece flange gasket set fits between the heat tubes on Mopar models equipped with Hemi engine. Made of asbestos.

These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. No te:...

Replacement header flange gaskets for models equipped with a small block LA engine. Eliminate that annoying ticking sound from your header flange! This header flange gasket is made out of graphite foil with a stainless metal...

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.

Reproduction of the original steel muffler floor pan support bracket for use with various 1967-76 Dodge and Plymouth A-body models. This bracket mounts to the floor pan and provides a place to attach the muffler hanger. For...

If you demand originality for your vehicle, don't settle for anything less than this complete set of OE-type bolts to mount your exhaust manifolds.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

These flanges connect the exhaust manifold to the head pipe. Flanges made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. Note:...

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Copper-Seal gaskets use "dead-soft" solid copper for extreme heat applications such as turbo-charged vehicles. Sold in pairs.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.

This is a universal connector that can be used in various locations for the exhaust system. Measures 2-1/2" inner diameter, and includes mounting bolts. Each set is sold in pairs, enough to do a vehicle with dual exhaust.

1968-75 A-body exhaust loor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket kit that...

This gasket connects the exhaust manifold to the head pipe. The composite metal design is excellent for all applications and can be removed and reused unlike other gasket materials. Note: 2-1/2" i.d. with 4" cente r to...

Replacement Q-clamps for various Mopar vehicles. Q-clamps were installed at the rear of the vehicle to secure the exhaust tips to the tailpipes.

This clamp secures the heat tubes to the intake manifold. Made from steel like original.