Pontiac Firebird Parts - Console Parts

We now offer #8 x 1" chrome sheet metal screws with integral washer. These screws were designed for use on many different components including, interior pillar post moldings, kick panels, rear side panels, interior door...

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimensio ns measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Shifter This economically priced shifter is of universal design, so it will fit a wide variety of truck applications. This economically priced shifter is of universal design, so it will fit a wide variety of truck...

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimensio ns measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimension s measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Reproduction of the original chrome sheet metal screws designed for various applications on 1960's, 1970's and 1980's models where #8 x 1-1/2" chrome screws were applied. Each screw replicates the original in appearance and...

This 1994-1996 Camaro 5-Speed Manual Transmission Shift Plate is a genuine GM replacement part. The 5-speed manual shifter plate comes complete with the shifter boot, shifter boot ring, ashtray lid and ashtray. It's comprised...

Replacement bulb for a variety of applications. Applications may vary depending on vehicle model and year.

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Reproduction of the original interior center console assembly designed for use on 1970-79 Firebird models. Each console is a complete one-piece upper and lower assembly ready to install. Original components can be removed...

Reproduction of the console shift lens backing plate originally installed on 1968-69 Firebirds with powerglide and Turbo Hydromatic transmissions with consoles. Mounts between the shift indicator lens and the bulb retainer...

Injection molded reproduction of the original clear plastic lens used with 1967 Camaro models with a TH200-4R or TH700-R4 transmission. Includes all gear indicator lettering in the correct translucent green.

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Original style oil line block fitting with sleeve and nut, used to adapt oil line to the engine block for a console-mount oil pressure gauge. Applications: 1967-69 Camaro models with console gauges

Highly recommended item designed to help ensure that the console is mounted in the proper location. Precision template for installing the console mounting bracket allows the console to line up correctly when installing....

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Die-Cast reproduction of the original 2-section automatic shift plate originally installed on all 1967 models with an automatic transmission and center console. This plate was used for all powerglide and turbo hydramatic...

Reproduction of the original backing plate that installed directly below the shift plate lens on various GM models with automatic transmission shift plates. Manufactured to correct dimensions in stamped steel. This...

Reproduction console switch bezel for 1997-99 models. This bezel is for convertible switch only.

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Reproduction of the original shift plate slider retainers for various 1967-74 Chevrolet models with automatic or manual transmission center consoles. These retainers hold the sliders in place on the shift plate. Manufactured...

Service replacement style, non-original looking shift tunnel assembly installed on all 1973-81 Camaro models with 3 or 4-speed manual transmissions. The tunnel is produced in ABS plastic for a snug, precise fit. An...

Reproduction of the original center floor console lid bracket designed for use on 1973-81 Camaro models. Each bracket is manufactured in stamped steel to original specifications. The bracket allows the console lid to...

Clear plastic with standard pattern white labeling indicator window decal for QuickSilver or Console QuickSilver shifter.

Reproduction of the original heated treated metal spring that allows the console door button to spring back after being pushed to open. This spring is designed for use on 1973-81 Camaros and 1970-81 Pontiac Firebird models.

Add the cup holder that GM left out of the 2nd Gen F-Body with the Holdster™ Armrest with drink holder replacement. This is NOT a plastic cap, but rather a new padded armrest and King size drink holder complete with a...

Reproduction console switch bezel for 1997-99 models. This bezel is for both convertible and traction control switches, plain.

Reproduction center console storage tray for 1997-99 Camaro and Firebird models. Each tray will replace a missing or damaged original.

If you have been wanting to put that stock 8 track stereo back in your car but your brackets and cover are long gone, we now have them! This is a quality reproduction of the 3 piece bracket set that will mount it back in your...

Quality reproduction of the original shift plate bulb retainer originally installed on various 1967-74 GM vehicles with automatic transmissions shift plates. Inserts directly below the shift plate area. The lamp socket...

OER® reproduction of the original clip that was used for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower...

Reproduction console switch bezel for 2000-02 models. This bezel is for traction control switch only, with arrow.

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Add the cup holder that GM left out of the 2nd Gen F-Body with the Holdster™ Armrest with drink holder replacement. This is NOT a plastic cap, but rather a new padded armrest and King size drink holder complete with a...

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Add the cup holder that GM left out of the 2nd Gen F-Body with the Holdster™ Armrest with drink holder replacement. This is NOT a plastic cap, but rather a new padded armrest and King size drink holder complete with a...

Reproduction console switch bezel for 2000-02 models. This bezel is for both convertible and traction control switches, plain.

This is an OER® reproduction of the console lid spring for 1967 Camaro consoles with the correct tension ratio. Replacing your worn out original spring with this new reproduction will keep your console lid opening and...

Reproduction of the original shift plate slider retainer screws that attach the rear shift plate retainer sliders to the 2 piece shift plate. Each screw is designed to replace the original exactly. For use on 1967 Camaro and...

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

This injection molded plastic slider inserts directly over the automatic gearshift lever assembly to seal the gap in the shift plate. Fits all 1968 automatic models and 1969 automatic models 1st design. This 1st design slider...

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

This is an original GM replacement for the coin holder that fits inside the console and holds small change. Applications: 1997-2002 Camaro models

Reproduction console switch bezel for 1997-99 models. This bezel is for traction control switch only, with arrow.

Reproduction of the original lens assembly for use with all 1967-69 Firebirds which included the console clock option. The outside diameter of the lens is three and 1/4 inches. Made in the USA!

Replacement rubber boot for B&M Megashifter. Measurements: 7-7/8" overall length 2-7/8" width 2-1/4" high 1-5/8" length of opening 5/8" wide opening

Replacement bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year.

Add the cup holder that GM left out of the 2nd Gen F-Body with the Holdster™ Armrest with drink holder replacement. This is NOT a plastic cap, but rather a new padded armrest and King size drink holder complete with a...

Reproduction of the original console mounting brackets for use with 1973-81 Camaro, and 1970-81 Firebird models. Each bracket is manufactured in stamped steel that replicates the original in quality and design. These are...

Reproduction GM console doors for 2000-02 Camaro models. Console doors can be painted to match your desired color by first spraying with vinyl primer then with vinyl dye.

Quality reproduction of the original shift plate lens used on 1968-69 Firebird models equipped with a TH350 or TH400 automatic transmission. These plastic lenses features the correct shift pattern and color. Replaces GM part...

Quality reproduction of the original shift plate lens used on 1970-81 Firebird models equipped with a 2 or 3 speed automatic transmission. These plastic lenses features the correct shift pattern and color.

Reproduction console switch bezel for 2000-02 models. This bezel is for convertible switch only, plain.

Add the cup holder that GM left out of the 2nd Gen F-Body with the Holdster™ Armrest with drink holder replacement. This is NOT a plastic cap, but rather a new padded armrest and King size drink holder complete with a...

Lokar?s floor mount gear indicator features a billet aluminum boot ring with LED illumination and a premium shift boot. Designed for flexibility, the sending unit can be mounted in a variety of locations such as on the...

Designed for large hole shifter installations, the Hurst Super Boot and Plate is for use with Competition/Plus Shifters. Measures 7-3/4" x 8-3/4", and comes complete with boot, chrome ID plate and all mounting hardware.

Reproduction center console door lid/armrest for 1982-84 Firebird models. Features original style textured finish and includes the hinge and latch.