All Makes All Models Danchuk Manufacturing

Fight battery acid corrosion with these handy little rubber pads. Mount them to the top of your battery to keep the metal frame away from those damging chemicals.

Restore proper steering function and drivability to your 1955-62 Chevrolet Bel Air, 150, 210, Nomad, Impala, Bel Air, Biscayne, and 1960-63 Chevrolet and GMC truck with this upper steering column bearing assembly. This...

Replacement grill bar emblem retainer set for 1957 150/210/Bel Air models. Includes bracket, spacer and pans. Made in USA

Add a custom touch to your Bel Air with these aluminum quarter panel emblems. Manufactured to replicate the shape of the original emblems with a bright gold anodized finish. Made in USA

This reproduction frame bracket with pivot holds the cross shaft ball stud.

These beautiful inserts are precision cut to the original depth and dimension. This panel has no emblems or holes Made in the USA! Fits: 1957 2 door Bel Air, hardtop, sedan, convertible, wagon and Nomad Note: Shipped...

Old drain seals are often cracked or clogged. So whether replacing or removing glass, the drain seals should be inspected and replaced if needed.Fits 1956-57 4 door Hardtop, Will also work on 1957 Sedans but must be trimmed...

Finally, the metal fan shroud you've been looking for! This shroud looks great, fits great, and is easy to install. Features a durable chrome finish and designed to work in any 1955-57 Chevrolet passenger model using a V8...

Reproduction upper rear window molding for 1955-57 two door hardtop models. Manufactured out of stainless steel, featuring correct contours and original style mounting studs.

This reproduction pivot ball provides the fulcrum for the bellcrank and screws into the bellhousing.

Reproduction of the wiper arm escutcheons at the cowl on all 1955 150 models. Manufactured as original with a bright chrome finish. Sold in pairs. Not for use on Bel Air or 210 models.

Reproduction wiper motor and driver mounting screws for 1955-57 models. Every set includes the correct number of screws for one vehicle.

When purchasing reproduction parts and accessories from Classic Industries® you can be sure that each and every product displaying the Restorer's Choice ™ symbol is manufactured correctly to exact specifications, ...

Reproduction kick panel vent door seals for 1955-56 models. Manufactured in the correct shape for a proper fit.

Replace your pitted and scratched molding connectors with Danchuk! Danchuk has solved the problem of damaged or lost window molding connectors by introducing these small but very important reproductions. Dankchuk manufactures...

Molded rubber reproduction of the dome lamp harness grommet for 1955-57 hardtop models. Measures 2-1/4" OD, 1/4" ID, and fits into a 1-12" diameter hole.

Reproduction trunk rod insulator for all 1955-57 hardtop and sedan models. This piece slides over one of the trunk rods and keeps them from squeaking together. One required per vehicle.

Reproduction license lamp lens for 1957 Chevrolet models. Features correct markings and fits just like the original. Mounting gasket is included. Fits hardtop, convertible, and sedan models.

Reproduction of the original rubber gear shift boot for 1955-57 Chevy passenger car models. This boot is prone to tearing and is a frequently overlooked detail.

Reproduction of the original trunk access body plugs designed for 1955-57 Chevrolet models. Each rubber plug is designed to replace the original and offers an authentic appearance and fit. Comes in a set of 4 plugs. Keep your...

Reproduction cowl top outer rubber bumpers for 1955-57 models. These rubber bumpers are used to cover one hole on each side of the cowl panel and keep water out.

Reproduction dome lamp assembly for 1955-57 Chevrolet full size models. Designed to exactly replicate the appearance of the original dome lamp. Applications: 1955 Hardtop 1955-57 Nomad

This reproduction stainless steel fender molding for 1956 Chevrolet Bel Air models feature correct contours, finish and mount using original style hardware. Note: Can be used as either RH lower or LH upper.

Reproduction cowl vent screw set for 1955-56 models. These are the correct style crews used to mount the cowl vent panel to the lower cowl panel. Sold as a set of five pieces.

Restorer's Choice, "show quality" reproduction LH wiper arm set for 1957-58 GM models with 1/2" small knurl wiper shaft and 3/16" bayonet connector. Features polished stainless steel finish and measures approximately 12"...

Unlike replacement style antennas, these reproduction assemblies are exactly like the originals. For the purist who demands perfection. We are pleased to offer these OE style antenna assemblies that include hardware.

Reproduction parking lamp and tail lamp housing seal set for 1955-56 Chevrolet models.

Reproduction fender antenna delete plug for 1955-57 models. This plug was used on models that were not equipped with a fender mounted antenna.

Reproduction of the original die-cut inner fender seal that attaches to the inner fender and seal the inner fender to the front fender eliminating road elements and water from entering the engine compartment. Includes 2...

These beautiful inserts are precision cut to the original depth and dimension. All panels are complete with Bel Air script and crest emblems. Made in the USA! Note: Shipped oversize.

This reproduction chrome antenna base for 1955-57 models includes gaskets and correct hardware to fit and function as original.

This dust cover mounts on the center link where the pitman arm ball connects. Designed to keep pitman arm ball socket clean and lubricated, each shield includes gasket. Will fit any model 1955-1957 Chevrolet with original...

This distributor wire grommet for 1955-57 Chevrolet passenger car models is located on the firewall and is a crucial, must-have part. Allowing this grommet to wear out is asking for a major electrical problem.

Reproduction of the original clutch pedal rubber rubber rebound bumper designed for use on 1955-57 Chevrolet models. Each bumper is designed and manufactured to replicate the original for a perfect replacement. Sold...

Headlamp Adjustment screw set for various 1947-57 GM models including Bel Air, Nomad, and Pickup. The correct hardware will make your installation easier, and give your classic a finished look. Sets includes adjuster screws...

Reproduction rear wheel housing seal set for 1955-57 models. These pieces fit between the quarter panels and the wheel housings. {specs} {fitment}

Reproduction steering column seal for 1955-57 Chevrolet models with automatic transmission. This gasket seals the steering column through the firewall. This sponge seal needs periodic replacement due to heat damage.

Reproduction door handle guards for all 1955-56 models. These die-cast guards will protect your paint and feature triple chrome plating. Mounting hardware is included. Made in USA.

Avoid destroying your original bezel nut or install a new nut without damaging it with this special tool. It is designed specifically to interlock with the recessed dimples on the outside edge of your bezel nut, which avoids...

This reproduction frame bracket with pivot holds the cross shaft ball stud.

Reproduction upper door access plugs for 1955-57 sedan models. These plugs are used on the front edge of the doors and their purpose is to keep dirt and moisture out.

Reproduction door belt molding for 1955-57 hardtop and convertible models. Manufactured to factory specifications featuring original style contours and finish.

Reproduction A-arm dust shield retainers for 1957 Chevrolet car models. Includes hardware.

Reproduction rear quarter glass seals for 1955-57 four door sedan models. Manufactured to factory specifications these seals feature the correct shape and size to fit the small stationary quarter glass.

Reproduction quarter window drain stops for 1955-57 Chevrolet convertible models.

This frequently overlooked felt washer seals off clutch cross shaft (Z-Bar) ends to protect against dirt and water damage. Recommended when replacing the cross shaft or pivot balls.

When purchasing reproduction parts and accessories from Classic Industries® you can be sure that each and every product displaying the Restorer's Choice ™ symbol is manufactured correctly to exact specifications, ...

Reproduction of the original grill for 1957 models. Manufactured to factory specifications, this grill features correct contours, fitment and is finished in anodized gold. Note: Shipped oversize.

Replace your cracked or missing accelerator pedal and dimmer switch grommets. The accelerator pedal grommet is located at the base of the accelerator pedal while the dimmer grommet fits snugly over dimmer switch. It is...

Reproduction steering column to dash cushion for 1955-57 Chevrolet models. This component needs periodic replacement due to heat damage.

These rubber seat stops are mounted to the cars bodywork in the rear seat well of the Nomad and station wagon. They support the rear seat back cushion when the seat is folded down.

Reproduction license lamp assemblies for 1957 models. Feature correct markings and include lenses, gaskets, housings, bulbs and wiring. Made in USA.

Reproduction backing plates for 1956 models. Manufactured to factory specifications featuring correct contours, pre-made mounting holes and bright chrome plating.

Reproduction of the original tail lamp assemblies for use with 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Manufactured to original specifications, these tail lamp assemblies feature chrome bodies, lenses, seals, and...

This grommet mounts on the firewall with the speedometer cable running through it.

For that clean, crisp look, detail your headlight bezels with our decals. One sheet of die-cut vinyl decals will detail both headlight housings. They are faster and easier to apply than paint. Matte black finish.

Restore your hub caps to showroom new with a new set of decals to enhance their appearance. Each decal sheet is made of quality die-cut vinyl. One sheet required per hub cap.

Reproduction glass setting channel set for 1955-57 Chevy two door hardtop and convertible models. These rubber seals secure the side glass to the metal channels. One set does all four windows.

Reproduction of the original style floor pan plug designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models as listed. Each grommet is manufactured in quality EPDM rubber replicating the original dimensions...

Includes rubber stoppers needed to replace the front hood, door, trunk and glove box stoppers. Note: Hood side bumpers are not included. Must purchase TF300214.