Classic Industries Restoration Parts and Accessories - AC Parts

Applications: 1978-79 3.2L Buick V6 1978-83 3.8L Buick V6 1978-83 3.8L Buick V6 Turbo 1982-83 4.1L Buick V6 1980 4.3L Pontiac V8 1980 4.9L Pontiac V8 1977 5.7L Buick V8 Note: Kit includes compressor, reciever, and orifice...

Vintage Air SureFit air conditioning condenser kit for 1958-59 Chevrolet and GMC pickup trucks. This kit has been custom designed to mount directly into the specific vehicle application. It includes a modern parallel-flow AC...

The Restorer's Choice™ Vintage Air Gen-IV Sure Fit evaporator kit for 1959-60 Chevrolet full size, Impala, and El Camino. This kit features a Gen-IV evaporator, mounting brackets, duct hoses, wiring harness, cable...

Fits: 1992-93 6 CYL (2.8) - CHEVY/GMC TRUCK 1989 6 CYL (2.8) - FIREBIRD 1990-92 6 CYL (3.1) - FIREBIRD 1990-92 8 CYL (5.0 & 5.7) - FIREBIRD 1990-92 6 CYL (3.1) - CAMARO 1990-92 8 CYL (5.0 & 5.7) - CAMARO

NORS (New Old Replacement Stock) heater core bypass valve bracket for 1972-74 Mopar B models originally equipped with AC. Produced in stamped steel and finished in gold cad plating, this bracket is designed to attach to the...

Replace your original, power-robbing RV2 compressor with a Sanden-style compressor upgrade that requires less horsepower to operate, runs smoother, and weighs half as much as the original units. This upgrade set is rated for...

Reproduction air conditioning filter/drier for 1972-73 Ford F-Series models with factory A/C. This stock replacement reciever installs on the left-hand side of the air conditioning condenser. It receives most of the liquid...

Reproduction air conditioning filter/drier for 1972-73 Ford F-Series models with factory A/C. This stock replacement reciever installs on the left-hand side of the air conditioning condenser. It receives most of the liquid...

Replacement AC seal kit for Camaro models. These dust flaps mount inside the engine compartment. Sold as a pair.

Replacement AC seal kit for Camaro models. These dust flaps mount inside the engine compartment. Sold as a pair.

Custom AC compressor manifold for March Performance pulley sets with March 7176 Sanden compressors. It reroutes the compressor lines downward where they are less visible and less vulnerable to exhaust heat. Important:...

Reproduction of the original 1964-68 Mustang air vent inlet seal. This is the seal for the air vent housing on the drivers (LH) side, under the dash on Mustang model from 1964 through 1968. Sold individually. OE part number...

This hose bracket is designed to secure a pair of heater hoses to the alternator bracket to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. Replaces GM part # 3825416. This was...

This compressor bracket is designed to accept Sanden compressors on in-line 6 cylinder Chevrolet models. Mounts on LH side with alternator or generator, all models without power steering.

Restore your RV2 AC compressor with this quality gasket sets to keep your AC system at peak efficiency. Set includes: 3 paper gaskets 4 metal gaskets 4 O-Rings

Give your LS1 a splash of style with this as cast aluminum finish AC Compressor. This custom-finish AC compressor is bench tested to meet or exceed factory specifications and is made in with 100% new components. This NEW,...

Give your LS1 a splash of style with this as cast aluminum finish AC Compressor. This custom-finish AC compressor is bench tested to meet or exceed factory specifications and is made in with 100% new components. This NEW,...

Compressor Cylinder Locator Pin: Correct cylinder locating pin used for the compressor cylinder. For use on all 1962-85 axial compressors.

Reproduction of the original style air conditioning duct installation hardware for use on 1967-68 Camaro and Firebird models with air conditioning. Includes all fasteners required to install the air conditioning under dash...

Vintage Air SureFit air conditioning condenser kit for 1953-56 Ford F100 pickup trucks. This kit has been custom designed to mount directly into mid 1950s F-100 trucks and can fit other F-Series models with modification. It...

If your classic was originally equipped with air conditioning and you just can't seem to get that cold air you once enjoyed, the original condensor may not be working to peak performance. Get into the cold with Classic...

If your classic was originally equipped with air conditioning and you just can't seem to get that cold air you once enjoyed, the original condensor may not be working to peak performance. Get into the cold with Classic...

Air Conditioning Engine Fastener Kit includes correct, OE style fasteners required, to attach the air conditioning parts to your Mustang. AMK Fastener Kits includes individually packaged sets of hardware for the various air...

Air Conditioning Engine Fastener Kit includes correct, OE style fasteners required, to attach the air conditioning parts to your Mustang. AMK Fastener Kits includes individually packaged sets of hardware for the various air...

Give your LT1 a splash of style with this chrome finish AC Compressor. This custom-finish AC compressor is bench tested to meet or exceed factory specifications and is made in with 100% new components. This NEW, not...

Remanufactured Tecumseh HG850-1000 Rotolock air conditioning compressor for Ford Mustang and Thunderbirds. This compressor features a lightweight aluminum case and original style square-cut Teflon Rotolock gasket/seals at the...

Reproduction air conditioning filter/drier for 1969-70 Ford Mustang and Mercury Cougar models with factory A/C. This stock replacement reciever installs on the left-hand side of the air conditioning condenser. It receives...

Made of billet aluminum and beautifully polished, this bracket is adjustable up to 3/4" before and after for perfect alignment, and designed to eliminate component vibration. This inboard mount set is for use on vehicles...

Leaky or clogged vacuum actuators lead to inefficient climate control operation.

The Restorer's Choice™ Vintage Air Gen-IV Sure Fit evaporator kit for 1963 Chevrolet full size, Impala, and El Camino with factory AC. This kit features a Gen-IV evaporator, mounting brackets, duct hoses, wiring...

This bracket set allows you to upgrade the power-robbing factory AC compressor in your Mopar with an efficient Sanden. No add-on pulleys necessary, everything stays in its original location. Fits most standard, shaker, and...

Complete condensor and drier set with brackets, hard lines, binary switch and other items needed for installation with a Vintage Air Gen IV air conditioning system. Set is designed for use on vehicles that came with and...

1971 - 1973 Mustang V - 8, Except 429 With Coil The clutch is attached to the front of your compressor and engages the compressor when your air conditioning is turned on. When these go bad, your clutch can clatter,...

1971 - 1973 Mustang V - 8, Except 429 With Coil The clutch is attached to the front of your compressor and engages the compressor when your air conditioning is turned on. When these go bad, your clutch can clatter,...

Vintage Air SureFit air conditioning condenser kit for 1964-66 Ford Mustang. This kit has been custom designed to mount directly into early Mustangs with compressors on the left side of the engine compartment. It includes a...

This reproduction lower air conditioning bracket is designed to original specifications for use on 1969-70 models equipped with big block engines. Camaro applications: 1969-70 big block models Impala / Full Size a...

This reproduction lower air conditioning bracket is designed to original specifications for use on 1969-70 models equipped with big block engines. Camaro applications: 1969-70 big block models Impala / Full Size a...

Receiver Drier Mounting Bracket: Reproduction brackets used to mount your receiver/drier unit on 1964-72 GM trucks.

1965 - 1966 Mustang 289 With Alternator The clutch is attached to the front of your compressor and engages the compressor when your air conditioning is turned on. When these go bad, your clutch can clatter, chatter, and...

Reproduction air conditioning condenser for various 1970-77 Ford Maverick models with factory AC. This high-efficiency six circuit condenser features a correct appearance but with 30% more contact area that the original...

Replacement AC compressor connector for 1984-89 models. This connector has an integral diode installed.

Replacement AC compressor connector for 1984-89 models. This connector has an integral diode installed.

Replacement AC compressor connector for 1984-89 models. This connector has an integral diode installed.

Vintage Air SureFit? condenser kit with chrome direr for 1957 Chevrolet Bel Air, One-Fifty, Two-Ten, and Nomad models. This kit is designed to mount directly into '57 fullsize passenger vehicles with V8 engines. In addition...

Reproduction air conditioning condenser for various 1975-78 Ford Mustang II models with factory AC. This high-efficiency six circuit condenser features a correct appearance but with 30% more contact area that the original...

Complete condensor and drier set with brackets, hard lines, binary switch and other items needed for installation. Set is designed for use on vehicles without factory installed air conditioning. Contents: Super Flow...

Reproduction air conditioning filter/drier for 1967-68 Ford Mustang and Mercury Cougar models with factory A/C. This stock replacement reciever installs on the left-hand side of the air conditioning condenser. It receives...

If your truck was originally equipped with air conditioning and you just can't seem to get that cold air you once enjoyed, the original condensor may not be working to peak performance. Get into the cold with Classic...

If your classic was originally equipped with air conditioning and you just can't seem to get that cold air you once enjoyed, the original condensor may not be working to peak performance. Get into the cold with Classic...

Reproduction air conditioning filter/drier for various 1994-95 Ford Mustang models with factory A/C. Applications include Mustang, Fairlane, Ranchero, and Cougar. This stock replacement reciever installs on the left-hand side...

Over the years AC bracket shims have a mysterious ability for disappearing. Now, Classic Industries is proud to offer brand new replacements to get that system mounted and working once again. Camaro applications: 1967...

If your classic was originally equipped with air conditioning and you just can't seem to get that cold air you once enjoyed, the original condensor may not be working to peak performance. Get into the cold with this original...

The Gen-IV system features all electronic controls requiring no cables, capillary tube or vacuum connections. It is a truly "fly-by-wire" system that uses separate heating and cooling coils for superior performance. The...

Converts AC system to an accumulator orifice, cycling clutch system as found on later model vehicles. Eliminates the troublesome VIR, with it's sticking POA and TXV valves. Reduces desiccant breakdown and rust in the steel...

Reproduction front air conditioning compressor bracket designed for models with a small block and A6 AC compressor. Camaro applications: 1967 small blocks with short water pump and stock exhaust manifolds Chevrol et / GMC...

Reproduction front air conditioning compressor bracket designed for models with a small block and A6 AC compressor. Camaro applications: 1967 small blocks with short water pump and stock exhaust manifolds Chevrol et / GMC...

1964 - 1967 Mustang 6 Cylinder The clutch is attached to the front of your compressor and engages the compressor when your air conditioning is turned on. When these go bad, your clutch can clatter, chatter, and make other...

Compressor Internal Oil Pump: Rebuild your original compressor. The internal oil pump assembly originally installed on axial style air conditioning compressors. Consists of an 1 inner and 1 outer rotor.

AC compressor switch round connector with two wires, found on AC compressors. This switch allows clutch control only when there is adequate pressure in the system.