Classic Industries Restoration Parts and Accessories - Radio and Stereo Parts

OER® reproduction of the original tone and fader control knobs designed for use on various 1968-70 GM models. Each knob is manufactured in quality injection molded ABS plastic with a bright chrome finish. Note: For use...

Reproduction of the original dash knobs designed for use on various 1969-70 Chevrolet models. This complete dash knob set will replace the old or worn out original knobs and help bring your dash back to a factory fresh...

OER® reproduction of the original radio control knobs for the Tone and Fader controls. For use with original AM and AM/FM in dash radios with stereo or rear speaker option. Manufactured to factory dimensions in injection...

OER® reproduction of the original radio knob set designed for use on various 1967-68 Chevrolet models with a stereo radio. This radio knob set will replace the old or worn out original knobs on factory in-dash radios. Knobs...

Reproduction of the original AM/FM radio lens designed for use with various 1971-76 Impala, Bel Air, Biscayne, Caprice, Camaro and Chevelle models as listed below with a stereo radio. Each lens is manufactured in clear...

Correct mounting nuts used to hold the radio in place on most GM applications. Fits radios that use 7/16"-28 thread x 1/8" thick flat style hex nuts.

Put the radio controls at your fingertips once again! Tired of always leaning over to change the radio station! If your 1995-99 Firebird has a radio control switch on the steering wheel, but it is not functioning as it once...

Now you can install any DIN or Double-DIN stereo in your Camaro with professional results! The rigid ABS plastic surround allows you to install the stereo of your choice and fully replace/upgrade the stock center dash panel....

Reproduction of the original dash radio bezel designed for use on 1969 Mopar B-body models. Each bezel is injection molded inquality ABS plastic replicating the original in appearance and fit. The bezel bolts into the dash...

Put the radio controls at your fingertips once again! Tired of always leaning over to change the radio station! If your 1999-02 Firebird has a radio control switch on the steering wheel, but it is not functioning as it once...

Reproduction of the original inner and outer radio and tone control knobs designed for use with 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Manufactured to correct factory specifications replicating the original in...

OER® reproduction of the original radio control knobs for the Tone and Fader controls. For use with original AM and AM/FM in dash radios without stereo or rear speaker option. Manufactured to factory dimensions in...

Now you can install any DIN or Double-DIN stereo in your Camaro with professional results! The rigid ABS plastic surround allows you to install the stereo of your choice and fully replace/upgrade the stock center dash panel....

Reproduction of the original inner and outer radio and tone control knobs designed for use with 1955 Chevrolet Bel Air, 150, 210, and Nomad models. Manufactured to correct factory specifications replicating the original in...

Install any aftermarket radio you want while maintaining the original look of your dash! These direct-fit radio mounts allow you to install any single DIN stereo head unit in your glove box without any fabrication or...

This trim plate for 1968-69 Plymouth B-Body models allows you to install any standard DIN CD player or head unit in your car without modifications to your dash. Manufactured from ABS plastic.

Reproduction radio trim plate for 1985-92 Firebird models. Note: Will not fit cars with digital dash.

Reproduction of the original style woodgrain radio control bezel designed for use with 1969-70 Mustangs with the deluxe interior, or Mach 1 package. Features authentic dimensions and molding with accurate openings for radio...

Reproduction of the original radio spinner knobs designed for use with 1955-59 Chevrolet and GMC truck models. These reproduction knobs are manufactured with injection molded ABS and feature a bright chrome finish. ...

Reproduction of the original radio control knob for 1955-59 Chevrolet and GMC truck models. This knob is manufactured in die-cast zinc to factory specifications and replicates the original in design, appearance, and fitment....

Replace your missing or worn out original radio knobs with this quality reproduction. Sold individually, this knob will replace your missing or worn out knob providing a correct original appearance.

Original Dash radio knob designed for use on 1983-87 Camaro and Firebird models. Use as required.

Reproduction 1977-80 Radio Control Knob Set for Corvette models{fitment}

Reproduction of the original dash radio control bezel for use on 1971-73 Mustang and Cougar models. This reproduction is stamped in metal material including the correct pebble grain matching the original. Includes the...

This optional equipment delete plate was for use on vehicles that were ordered specifically without a radio, usually for racing applications. The plate is molded from sturdy black ABS plastic. This radio delete plate for...

This optional equipment delete plate was for use on vehicles that were ordered specifically without a radio, usually for racing applications. The plate is molded from sturdy black ABS plastic. This radio delete plate for...

Replacement radio bezel for all 1966-67 Nova models. Update the stereo in your Nova with with a modern CD player and still retain the factory look with an original style bezel.

Reproduction of the original standard radio bezel designed for use on 1967-69 Dodge Dart models. Each bezel is manufactured in injection molded ABS plastic replicating the original in quality and design. Features the correct...

Damaged sheetmetal surrounding the radio opening can now be repaired with this stamped steel dash panel. Die-stamped from heavy 20 gauge sheet metal, installation requires removal of damaged sheet metal; then repair panel can...

Reproducton of the original radio knobs designed to replace the old or worn out original on 1947-53 Chevrolet and GMC trucks. Knobs are manufactured to replicate the original appearance. Comes in a 4 piece set. {fitment}

RetroSound screen protectors feature a vintage-look radio dial, giving your digital RetroSound radio an added sense of authenticity. Similar to what's used on cell phone screens, these clear screen protectors apply without...

Adding Action Artistry styling parts will make your Mustang look great. Unlike other cheap, plastic versions, these are sure to stand the test of time and sure to impress. Choose from a full line of products for your...

Quality reproduction of the original radio delete plate designed for use with 1970-81 Pontiac Firebird models ordered from the factory without a radio. This often missing plate will cover the hole in the dash for a stock...

Reproduction of the original radio housing designed for use with 1947-53 Chevrolet and GMC truck models. Housing are manufactured to factory specifications and install same as original. This maroon housing will match the...

RetroSound screen protectors feature a vintage-look radio dial, giving your digital RetroSound radio an added sense of authenticity. Similar to what's used on cell phone screens, these clear screen protectors apply without...

Reproducton of the original radio knobs designed to replace the old or worn out original on 1954-55 Chevrolet and GMC trucks. Knobs are manufactured to replicate the original appearance. Comes in a 4 piece set. {fitment} ...

Excellent reproduction of the original radio control bezel designed for use with 1969-70 Mustangs. Each bezel is manufactured in quality injection-molded ABS and replicates the original in design, appearance, and fitment....

OER® reproduction of the original tone and fader control knobs designed for use on various 1968-70 GM models. Each knob is manufactured in quality injection molded ABS plastic with a bright chrome finish. Note: For use...

Reproduction of the original factory style dash radio knob designed for use on 1960-63 Falcon models. Each radio knob is manufactured in injection molded plastic and features a plastic center matching other knobs on the dash....

Reproducton of the original radio knobs designed to replace the old or worn out original on 1954-55 Chevrolet and GMC trucks. Knobs are manufactured to replicate the original appearance. Comes in a 4 piece set. {fitment} ...

Reproduction radio lens designed for use with 1963 Corvette models with original Wonderbar style radio. Each lens is manufactured in quality injection-molded UV acrylic replicating the original in design, appearance, and...

Reproduction radio control knobs for 1978-87 C10 and GM truck radios. Produced in OE style injection molded plastic and finished in chrome, as original. Features original style knob icons. Includes four pieces. May also fit...

Reproduction of the original 1969-70 Mustang radio side filler panels. These black plastic trim panels fit upright on either side of the in-dash radio and act as a fillers around the radio / heater control panel. Sold in...

OER® reproduction of the original volume and tuning control knobs designed for use with 1967-69 Firebirds with original AM or AM/FM radios. Manufactured to OEM specifications fgeaturing a bright chrome finish. Will...

Reproduction of the original, cosmetically correct radio dash bezel designed for use on 1966-67 Chevy II and Nova models. Each radio dash bezel is manufactured in quality injection molded ABS plastic featuring a bright...

Reproduction volume and tuning knobs for 1968 Nova and Corvette factory radios. Replace your knobs and bring your dash back to original.

Reproduction of the original radio surround bezel for use with 1970-74 Barracuda, Cuda, and Challenger models (except 1970 Challenger with standard dash). Each radio bezel is manufactured in injection molded ABS replicating...

Reproduction of the original factory style dash radio knob designed for use on 1960-63 Falcon and 1962 Fairlane models. Each radio knob is manufactured in injection molded plastic and features a chrome insert center matching...

Reproduction of the original volume control knob and tuner control knob radio knobs designed for use on various GM models including Camaro and Impala. Each knobs is manufactured in quality zinc die-cast metal and chrome...

Reproduction of the original radio dial knob designed for use with 1963-64 Plymouth Barracuda and Valiant models. Each dial is manufactured in quality die cast zinc featuring a polished chrome face and black grooves as...

Adding Action Artistry styling parts will make your Mustang look great. Unlike other cheap, plastic versions, these are sure to stand the test of time and sure to impress. Choose from a full line of products for your...

Replacement patch panel of the radio dash panel for 1968-72 Chevy and GMC trucks. This panel is ideal for repairing dashes that have had holes cut in the radio area.

Reproduction of the original radio delete dash bezel designed for use on 1968-69 Dodge and Plymouth B-Body models. Each bezel is designed and manufactured to replicate the original in fit and appearance. Features correct...

Reproduction of the original radio delete dash bezel designed for use on 1968 Mopar B-Body models. Each bezel is designed and manufactured to replicate the original in fit and appearance. Features correct grain with chrome...