Classic Industries Restoration Parts and Accessories - Bolts and Hardware

OER® reproduction of the original hood to fender rubber stoppers designed for use on 1967-72 Chevrolet and GMC truck models. These uniquely designed bumpers will replace the originals exactly offering years of service...

This authentic reproduction hood pin set is manufactured to replicate the originals in every detail. Include includes: Studs Pin clips Bezels Lanyards Gaskets Mounting hardware Mopar Authentic Restoration™ Product ...

Correct replacement of the original hood adjuster and bumper designed for use on 1998-2002 Camaro and Firbeird models. This hood adjust bumper will install on the front center bumpers that go on the facia center support. Each...

Stainless Steel accessory bolt kits from Totally Stainless. These kits are a great compliment to Totally Stainless? line of body kits. They contain specialty fasteners not included in their body kits to finish off the look.

OER® reproduction of the original truck hood rubber bumpers designed for use on 1955-1957 Chevrolet and GMC truck models. Each rubber bumper is manufactured to replicate the original. Replace the old or worn out bumpers...

Stainless Steel accessory bolt kits from Totally Stainless. These kits are a great compliment to Totally Stainless? line of body kits. They contain specialty fasteners not included in their body kits to finish off the look.

Reproduction of the original Mustang hood safety catch designed for use on 1964-65 Mustangs. This hood latch will install with any OEM hood. Easily mounts and does not require special tools for installation. Manufactured...

Back in the 60s and 70s, hood pins were a very common feature that existed on the most famous muscle cars of the time. Add some heritage to your modern muscle with the Non-Functional Hood Pin Appearance Kit. These chrome...

Reproduction EDP coated hood shock bolts. Two required per shock, four per vehicle.

Rproduction of the original hood insulation clip designed for use on various 1966-71 Mopar models. Clip is designed and manufactured in stamped steel to replicate the original. Will fit and function properly. This clip was...

Reproduction of the original hood prop rod retainer clip designed for use on 1988-93 Mustangs. If the original retainer clip is broken or missing, your hood prop will not be secure when stored. This clip will replace the...

Genuine GM gas-charged hood support strut for 1982-92 Camaro and Firebird models with steel hood. Manufactured to factory original specifications featuring the correct OE supporting pressure and original style mounting...

CNC machined center hood brace for 1957 Chevrolet models is a must for today's restomod builds. This billet brace will give your engine compartment a stunning look and set you apart from the crowd. Stainless hardware...

These unique bushings are designed to never wear out as conventional bushings do. They are self lubricating, never squeak, are weather resistant and are produced using the latest polyurethane materials. Washers included. ...

Factory style replacement black plastic hood insulation clip. Sold in a set of 22 clips. Applications: 1964-72 Mopar A-Body models 1964-72 Mopar B-Body models 1970-72 Mopar E-Body models

Reproduction striker for hood catch on 1977-80 Chevrolet/GMC C/K-Series trucks with T44 hood release cable option. Each striker is manufactured in bent and welded steel rod construction that is threaded to original GM...

This is a correct hood latch pop-up spring designed for use with Chevrolet and GMC truck models. Each spring is manufactured to factory specifications featuring the correct tension ratio. Replaces OEM part number 14016593....

The rubber bumpers on your hood can become worn out, deteriorated, or simply lost. These reproduction 1971-73 Mustang rubber bumpers will help your hoods appearance as well as provide a secure fit when closing the hood. Sold...

Factory-style reproduction of the original front hood bumper rubber bumpers designed for use on 1970-74 Mopar E-Body models. Each bumper is manufactured in EPDM rubber to the correct configuration for a perfect fit. Sold...

Reproduction of the original hood adjust bumper and screw set designed for use on various 1960-64 Ford models. Each bumper is reproduced to factory specifications and include 2 screws and 2 nuts for a complete replacement....

Reproduction of the original hood adjustment bumper that was used on various 1965-1986 Ford and Mercury models. Each bumper features a "smooth top" or solid rubber head that replicates the original in every detail. This...

Reproduction of the original GM hood tachometer vent line set for use with various 1967-72 Pontiac models including 1967-69 Firebird and Trans Am. In 1968 Pontiac had a problem with their hood tachometer fogging up, so in...

Stainless Steel accessory bolt kits from Totally Stainless. These kits are a great compliment to Totally Stainless? line of body kits. They contain specialty fasteners not included in their body kits to finish off the look.

Factory style replacement black plastic hood insulation clip. Measurement: Shaft Size - 11/16" long x 1/4" wide. Sold individually. Applications: 1964-72 Mopar A-Body models 1964-72 Mopar B-Body models 1970-72 Mopar E-Body...

Reproduction hood hinge mounting plate for 1968-70 B-Body models. These pieces repair the commonly rusted hood hinge mounting area, and are made from 18 gauge steel.

Reproduction hood adjustment sets for all 1955-56 models. These sets include the rubber stoppers as well as the attaching hardware..

Stainless Steel accessory bolt kits from Totally Stainless. These kits are a great compliment to Totally Stainless? line of body kits. They contain specialty fasteners not included in their body kits to finish off the look.

CNC machined billet under hood diagonal side braces for 1955 Chevrolet models is a must for today's restomod builds. These braces will give your engine compartment a stunning look and set you apart from the crowd. Sold as a...

Reproduction hood hinge mounting plate for 1968-70 B-Body models. These pieces repair the commonly rusted hood hinge mounting area, and are made from 18 gauge steel.

Reproduction hood pin components. Each piece is manufactured to replicate the originals in every detail. Mopar Authentic Restoration™ Product Note: For s teel hood applications only.

Hood brace pads will eliminate rattling between the outer hood skin and the cross braces that form the frame structure of the hood.

Reproduction hood pin components. Each piece is manufactured to replicate the originals in every detail. Mopar Authentic Restoration™ Product Note: For s teel hood applications only.

Reproduction of the original hood stop bolts which keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct flange nuts and fit a wide variety of GM applications. Includes the rubber...

OER® reproduction of the original style hood safty latch assembly designed for use on 1967-81 Chevrolet Camaro models. Each assembly is manufactured in stamped steel replicating the original design. This reproduction...

Reproduction of the original hood stop bolt and nut set designed for use on various 1958-77 GM models. This bolt and nut set will keep the hood adjusted to the proper height. These 5/16"-18 x 1-3/8" bolts include the correct...

Quality reproduction of the original hood to cowl weatherstrip seal that attaches to the cowl panel and seals the area between the hood and windshield. This correctly configured seal is manufactured to exact specifications...

Reproduction of the original cowl to hood seal weatherstrip that seals the back edge of the hood to the upper section of the firewall. This seal fits all 1967-68 Mustangs and Cougars. Seal comes complete with mounting...

Reproduction hood hinge mounting hardware for 1955-56 models. Every set includes enough bolts and washers to mount the hinge to hood and hinge to body.

CNC machined billet under hood diagonal side braces for 1955 Chevrolet models is a must for today's restomod builds. These braces will give your engine compartment a stunning look and set you apart from the crowd. Sold as a...

Reproduction center hood brace for all 1957 models. Manufactured to factory specifications featuring original style shape and length. This brace is mounted to the center underside of the hood. Made in USA.

Reproduction of the original rubber hood bumper set designed for use on 1962-66 Chevrolet and GMC truck models. Each bumper is manufactured to replicate the original. Will replace the old or worn original. Includes 6 rubber...

Reproduction hood hinge bolts for 1967-81 Camaro models. Manufactured out of stainless steel for durability, plain stainless finish. Set contains 8 indented head bolts. {fitment}

Reproduction hood hinge mounting hardware for 1957 models. Every set includes enough bolts and washers to mount the hinge to hood and hinge to body.

Reproduction hood scoop mounting hardware set for 1967 GTX models. Every set includes the correct studs, bell tower nuts, and sealing washers. One set required per vehicle.

Reproduction of the original hood pin mounting lock retainer designed for use on the various models listed below. Each retainer is manufactured in stamped steel and replicated the original in fit and design. Manufactured from...

The rubber stoppers on your hood can become worn out, deteriorated, or simply lost. These reproduction stoppers will help your hoods appearance as well as provide a secure fit when closing the hood.

Reproduction 1981-87 Buick Regal EDP coated hood shock bolts. Replaces GM part #1264446. 2 required per shock 4 per car.

Reproduction of the original hood support rod retainer. Over time, these parts can become brittle and break easily. Keep your hood supports firmly in place with quality pieces from Classic Industries. Sold individually. ...

Complete restoration of the hood and trunk areas of your classic car is made much easier by having the right mounting hardware. Each set includes all the necessary nuts, bolts, screws and washers for a complete replacement. ...

OER® reproduction of the original truck hood rubber bumpers designed for use on 1947-55 Chevrolet and GMC truck models. Each rubber bumper is manufactured to replicate the original. Replace the old or worn out bumpers...

Reproduction hood bumper reinforcement plate used on 1971 B-Body and 1972-74 A, B & E-Body vehicles. Formed from the correct gauge material and heat treated to provide the proper temper and wear resistance of original parts....

Reproduction of the original hood adjustment bumper designed for use on various GM and Ford models. Manufactured to correct specifications, each bumper includes correct threaded length and rubber top. Features a 1" diameter...

CNC machined center hood brace for 1956 Chevrolet models is a must for today's restomod builds. This billet brace will give your engine compartment a stunning look and set you apart from the crowd. Stainless hardware...

GMCApplications: 1967-1972 GMC Pickup Truck 1967-1972 GMC Suburban 1970-1972 GMC Jimmy

Set your engine compartment apart from the rest with NotcHead CNC machined stainless steel under-hood hardware. The unique seven-notched design combined with with NotcHead?s unique pin drive socket virtually eliminates the...

Original type replacement hood pin manufactured from stamped steel and comes complete with the bolt and washer for a quick installation. The hood pin bolt mounts in the original location and is a direct-fit replacement for...

These unique bushings are designed to never wear out as conventional bushings do. They are self lubricating, never squeak, are weather resistant and are produced using the latest polyurethane materials. Hardware included.

Reproduction of the original hood struts designed for use with 1981-87 Regal fiberglass hoods. Manufactured to replicate the original in design and fitment. This is the correct hood shock for the 1981-87 Regal models with a...

Reproduction hood strut for 1998-02 Firebird models. Manufactured to factory specifications, featuring correct length and strut pressure. Sold as a pair. One pair required per vehicle.

The rubber stoppers on your hood can become worn out, deteriorated, or simply lost. These reproduction stoppers will help your hoods appearance as well as provide a secure fit when closing the hood.