Classic Industries Restoration Parts and Accessories - Electrical Switches

OER reproduction of the original turn signal switch designed for use with 1963-66 Mopar A and B-Body models without tilt steering wheel. Each turn signal switch replicates the original allowing a complete replacement of the...

Reproduction of the original 12 volt headlight switch for 1955-59 Chevrolet and GMC truck models, 1955-56 Chevrolet One-Fifty, Two-Ten, Bel Air and Full Size Passenger Car models and 1955-57 Corvette. Replaces GM OE part #...

Reproduction of the original ignition switch wiring pigtail is perfect when replacing the ignition switch and ignition cylinder. Runs from ignition switch to the harness. Features correct color-coded wiring and pigtail...

Reproduction of the original ignition switch wiring pigtail is perfect when replacing the ignition switch and ignition cylinder. Features correct color-coded wiring and pigtail design which replaces the original exactly. This...

Reproduction "Final Design" turn signal switch for 1967-71 Mopar A, B, C, & E-Body models without tilt wheel. This switch comes with metal connectors attached to the ends of the wires and includes the plastic connector for a...

This universal 2 Window set comes with a chrome 2 switch driver's control panel, 1 individual chrome window switch, wiring harnesses and instructions. Note: These window switches are not designed to replace the OE style...

Replacement turn signal switch wire harness adapter for a wide variety of 1969-78 models to convert a late model switch to an early model vehicle. Aftermarket part numbers are S-1751 and 1893623. Important: Used with...

Bezel for four button power window switch on 1957 Oldsmobile 88, Super 88 and 98 equipped with power windows. This is the bezel used on the driver's door. Bezel only, does not include any switch parts.

Chrome-plated, die-cast bezel for the single button power window switch on rear doors or quarter panels for 1958 Oldsmobiles, 1958 Buick Special two and four door hardtops, convertibles, and four door sedans, and all 1958...

Chrome-plated, die-cast bezel for the single button power window switch on 1954-56 Oldsmobile with electric power windows, front passenger door and rear doors/quarter panels 1957 Oldsmobile, rear doors or rear quarter panels,...

Bezel for single button power window switch on right front door of 1957 88, Super 88 and 98 models with power windows. Bezel only.

The cruise control switch deactivates the cruise when the brake is applied. Fits 1998-02 Firebird models.

Reproduction of the original wiper switch for 1967-68 GM models. Each switch will install and fit just as original. Note: Does not include retainer nut. For 1967-68 Firebird Wiper Switch retainer nut, use part# 533012 ...

Reproduction of the original switch designed for various classic muscle car applications. This switch is manufactured utilizing the original NOS design making this reproduction authentic in every detail. Manufactured to...

Replace your original inoperative stop lamp switch with a Delco service part. Note: Switch is a service replacement part that may not match the original switch cosmetically. However, each switch will fit and functio n as...

Replace your original inoperative stop lamp switch with a Delco service part. Note: Switch is a service replacement part that may not match the original switch cosmetically. However, each switch will fit and functio n as...

Reproduction of the original heater switch and wiring designed to replace the old or non working original. Includes a complete wiring harness and attached switch for a complete replacement. For use with 3/speed motor on...

Reproduction of the original style turn signal switch for 1967-71 Mopar A, B & E-Body models without tilt steering wheel. This switch is manufactured to exact factory specifications and comes with metal connectors attached to...

Reproduction of the second design Mopar Chrysler, Dodge, and Plymouth turn signal switch assembly designed to replace the worn out or non functional original. Manufactured to exact specifications, each switch includes an...

Single button power window switch repair kit for a wide array of 1958-70 GM models. Each repair set includes switch base, button, alignment rod, and necessary clips. For cars with corner cut switch base. Sold individually. ...

Reproduction of the second design Mopar Chrysler, Dodge, and Plymouth turn signal switch assembly designed to replace the worn out or non functional original. Manufactured to exact specifications, each switch includes an...

A neutral safety switch allows current to pass from the ignition switch to the starter when the lever is placed in the P or N position or the clutch is depressed. Located on the lower steering column or the floor shifter of...

Replacement headlight dimmer switch for 1953-54 Corvette models. Over time, many of these switches burn out making it impossible to switch between high and low beams. Designed to meet original specifications in form, fit and...

Due to excessive heat and electrical loads, your ignition switch may become inoperative. Replace the burnt-out ignition switch in your 1998-00 C/K truck with a quality reproduction switch.

The door jamb switch activates the dome lamp or the door ajar lamp. Located on the door hinge pillar, this reproduction switch can easily be replaced when it is non-operational. 1st design.

Due to excessive heat and electrical loads, your ignition switch may become inoperative. Replace the burnt-out ignition switch in your 1995-96 C/K truck with a quality reproduction switch.

Due to excessive heat and electrical loads, your ignition switch may become inoperative. Replace the burnt-out ignition switch in your 1997 C/K truck with a quality reproduction switch.

Replace your old non-working headlamp switch with these OE quality replacements. This switch on the dash or steering column controls the current flow to the headlamp system.

The door jamb switch activates the dome lamp or the door ajar lamp. Located on the door hinge pillar, this reproduction switch can easily be replaced when it is non-operational. 2nd design.

The cooling fan switch monitors coolant temperature and signals the radiator fan to turn on or off. When the engine is cool, the switch opens to keep the fan from spinning. When engine is warm, the switch closes to turn fan...

This column mounted dimmer switch allows the driver to select either high or low-beam operation of the headlamps and to switch between the two. Located in the steering column as an integral part of the turn signal switch....

When it comes to safety on the road, a good working switch can make the difference between trouble and safety! Don’t find yourself stranded on the side of the road with one full and one empty tank with no way to switch...

1970 Mustang 1971-72 Thunderbird 1971-72 Torino Lincoln Applications: 1971-79 Continental 1971 Mark III 1976 Mark IV Mercury Applications: 1971-77 Comet 1971-72 Cougar 1971 Montego

Reproduction 8-terminal headlamp switch with bracket to fit 1969 Ford Mustang. Correct spacer is included for the front of the switch to allow for convenient replacement of your FoMoCo original on 1969 Mustang models....

Excellent tool allowing easy engine starting from under the hood. Features heavy gauge, rubber covered copper wire. Simply depress the button to jog or start the engine. Made in USA

Replacement headlamp switch for 1984-89 Corvette models. Manufactured to factory specifications for proper fit and functionality.

Located in the parking brake release handle of 1982-05 GM models, this reproduction parking brake switch switch is needed to alert the driver whenever the parking brake is applied on the vehicle. {fitment}

Reproduction of the 1969 Firebird tilt column steering wheel ignition switch. Excellent quality switch includes correct dark green shade. Made in the USA!

Reproduction turn signal switch with correct connector and wiring colors to match up with your stock 1957-59 pickup, panel or suburban models.

Replace your inoperative windshield wiper switch with this top quality reproduction. Manufactured to fit and function just like the original. Fits 1965-66 models with 5 speed wipers.

Reproduction turn signal switch for 1955's with correct wiring colors to match up with your stock pickup, panel or Suburban.

{fitment}

Correct reproduction of the original stoplight switch for 1955-57 models.

Usually in dire need of replacing, after years of use. This switch allows the driver to select either high or low-illumination of the instrument panel.

Reproduction turn signal switch with correct connector and wiring colors to match up with your stock 1956 pickup, panel or Suburban models.

This kit offers the choice of Back-Up Light Switch oR Neutral Safety Switch Kit. Kit fits TH-350, TH-400, 700-R4, TH-200, 200-4R, and 4L60 transmissions. Single trigger for back-up light switch, or double trigger for neutral...

This is the steering column mounted ignition switch, which was moved from the dash panel for the 1971-73 Mustang and a variety of other Ford models. A quality replacement switch, it is made to work just like the original...

Reproduction ignition switch for various 1968-69 GM models. Switch does not include lock cylinder and keys. 7 pin style. {fitment}

Be sure that your ignition switch is always in proper working order by replacing your failing original with one of our original Delco ignition switches. Applications: 1968 Camaro models {specs} {fitment}