Classic Industries Restoration Parts and Accessories - Hardware

Insulator and hanger assembly for the right hand (passenger side) of the exhaust system on 1965 through 1968 Mustangs, both 6 and 8 cylinder engines. Stamped steel construction with a reinforced rubber strap. All components...

These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. No te:...

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

These gaskets seal exhaust manifolds to the cylinder heads. These Copper-Seal gaskets use "dead-soft" solid copper for extreme heat applications such as turbo-charged vehicles. Sold in pairs.

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

Clamp and Hanger set for aluminized and stainless steel 1955 Chevrolet 8 cylinder with rams horns manifolds dual exhaust system. Used with part #'s SC63047, SC63047S, SC63048, SC63048S, SC63049 and SC63049S.

Reproduction stainless steel muffler hangers for 1955-56 models. This hanger attaches the muffler to the frame bracket and provides support for the exhaust system. Fits either RH or LH.

OE style dual exhaust hanger kit for V8 powered 1967-69 Ford Mustangs. This kit includes all the hangers, clamps, and hardware needed to install a factory style 2-1/4" dual exhaust system. All components are of premium...

Beautiful reproduction of this commonly removed or discarded engine component. This item is necessary to help keep exhaust manifold attachment bolts from backing-out and possibly being lost. A must for the true engine...

Tired of the bailing wire or wire hanger that's supporting the muffler in your classic Chevrolet. Replace it with a real muffler frame bracket. Includes mounting hareware.

These reproduction straps hold the resonators and give them additional support. Will fit all 1971 B-Body models.

Each lock is manufactured to keep your exhaust manifold bolts from inadvertently loosening up.

Left side rear upper exhaust bracket for 1965-70 Ford Mustang GTs with factory dual exhaust. All components are of premium quality, made to original factory specifications, and test fitted to the corresponding vehicles for...

This BBK Premium steel-reinforced graphite header gasket set is designed to give your 1979-95 Mustang or 1973-97 F-Series Truck with 5.0 or 5.8 engine a quality, long lasting, secure seal. Reduce your risk of a blown header...

Chevrolet passenger car exhaust manifold heat riser gasket for V8 models with 2-1/2" exhaust. Seals between exhaust manifold and the heat riser. Fits heat riser part numbers EMR002 and EMR004.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Replace your rusted, busted or missing tailpipe bracket. Mounts to the rear of the vehicle's frame and supports the tailpipe hangers.

When it comes to a variety of exhaust hangers, Classic Industries® has the best selection! Applications: 1969-73 6 cylinder muffler support hanger 1969 283/307ci muffler support hanger 1969 283/327ci dual exhaust muf fler...

OE style dual exhaust hanger kit for V8 powered 1970 Ford Mustangs. This kit includes all the hangers, clamps, and hardware needed to install a factory style 2-1/4" dual exhaust system. All components are of premium quality,...

These BBK premium quality header gasket sets are designed to give you a quality long lasting seal. Will work on most stock or aftermarket applications. Made in USA

These flanges connect the exhaust manifold to the head pipe. Black asbestos material, 1/16" thk. 2-1/2" I.D; 4" center-to-center flange bolts. 2 required.

Reproduction rubber and stainless steel tailpipe hangers for 1957 models. This hanger is recommended for replacement when the rubber deterioriates or cracks.

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA

Replacement exhaust manifold gasket for various 1962-1997 Ford and Mercury models with straight-6 motors. Applications include Mustang, Falcon, Comet, Bronco, and F-Series Truck. They are specifically designed for Ford 144,...

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Custom rear upper exhaust brackets for converting to GT dual exhaust. These brackets eliminate the need to drill mounting holes in the frame saving you a lot of time and frustration. All components are of premium quality,...

Replacement tail pipe hangers for 1967-69 Hemi & 440 B-Body models. These hangers bolt to the floor pan, and at the same time support & clamp the tailpipe to the muffler. Made in the USA.

If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.

Reproduction of the originalexhaust resonator hanger clamps used to hold the exhaust resonator to the frame on 1965-66 models. Resonators were used on 1965 models with 327 V8 engines and 1966 models equipped with L79...

Replacement muffler straps for 1970 AAR 'Cuda and T/A Challenger models. These straps attach to each of the mufflers and secure them to the floor hangers.

Reproduction of the original rear dual exhaust hanger for tailpipe to insulator installed on 1965-69 Mustangs with 289 and dual exhaust, GT models. Manufactured to factory specifications offering an authentic appearance and...

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9"...

Clamp and Hanger set for 1957 Chevrolet 6 cylinder aluminized or stainless steel single exhaust system. Used with part #'s SC63018, SC63018S, SC63019, SC63019S, SC63020, SC63020S.

1968-75 A-body exhaust loor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket kit that...

Clamp and Hanger set for 1955 Chevrolet 8 cylinder aluminized and stainless steel single exhaust system. Used with part #'s SC63003, SC63003S, SC63004, SC63004S, SC63005 and SC63005S.

Reproduction rear muffler hanger. This rubber muffler mount is manufactured to factory specifications in this original design.

This clamp secures the heat tubes to the intake manifold. Made from steel like original.

WALKER Exhaust Clamp, 45MM, 1-3/4" HEAVY DUTY

Reproduction of the original exhaust hanger for use with 1970-73 Camaro and Firebird models. Replace your missing exhaust hanger with this quality reproduction, for vehicles equipped with dual exhaust systems. The hanger...

This complete installation will enable even the shade tree mechanic the ability to install a complete aluminized exhaust system on any 1967 thru 1969 Camaro regardless of the engine size. This kit includes allclamps and...

Clamp and Hanger set for 1956 Chevrolet 8 cylinder aluminized or stainless single exhaust system. Used with part #'s SC63012, SC63012S, SC63013, SC63013S, SC63014 and SC63014S.

Correct replacement style Walker exhaust clamp for use with most applications requiring 2-1/8" clamp. Please check your applications carefully before ordering.

Clamp and Hanger set for 1957 Chevrolet 8 cylinder aluminized or stainless steel dual exhaust system. Used with part #'s SC63024, SC63024S, SC63025, SC63025S, SC63026 and SC63026S.

Heat resistant packing helps prevent exhaust leaks. This unit installs between the headpipe and exhaust manifold outlet. Sold individually. Measures 2-3/4" I.D. Click Here For Ford Applications Click Here For Mercury...

These tail pipe support hangers bolt to the floor pan brackets that are mounted above the resonators. Will fit all 1970 Barracuda and Challenger models. Made in the USA.

Reproduction rubber and stainless steel tailpipe hangers for 1955 models. This hanger includes the clamp and is recommended for replacement when the rubber deterioriates or cracks.

Replacement Q-clamps for various Mopar vehicles. Q-clamps were installed at the rear of the vehicle to secure the exhaust tips to the tailpipes.

Edelbrock Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal core composite material consisting of two graphite coated, heat resistant fiber blended sheets that are mechanically and chemically...

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

OE style dual exhaust hanger kit for V8 powered 1964-66 Ford Mustangs. This kit includes all the hangers, clamps, and hardware needed to install a factory style 2-1/4" dual exhaust system. All components are of premium...

Why bolt up your new side pipe exhaust system with those rusty old clamps you?ve got laying around. Finish off your exhaust system with these stylish chrome clamps. Sold individually.

Reproduction of the original style band clamps for use on 1967-81 models. These clamps are used for attaching tailpipe hangers.

If you demand originality for your vehicle, don't settle for anything less than this complete set of OE-type bolts to mount your exhaust manifolds. Fits: 1967-69 Dart 1967-69 Valiant

These hangers bolt to the rear end of the rear frame rail. For 1967 GTX models with dual exhaust. Made in the USA.

Soft conforming aluminum gaskets easily conform to the header flanges for a superior seal. Each set comes with 2 gaskets.

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA

Hooker collector rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

If you demand originality for your vehicle, don't settle for anything less than this complete set of OE-type bolts to mount your exhaust manifolds.