Classic Industries Restoration Parts and Accessories - Moldings

Reproduction of the original mounting hardware required to install the fender air extractors, aka fender louver, on 1978-79 Camaro Z-28 models. This set includes two outer perimeter metal mounting brackets, two plastic poly...

Reproduction door moldings for use on 1963 Impala SS models. Includes both RH and LH door moldings and attaching clips. Note: Shipped oversize.

In 1969, GM offered a deluxe trim and comfort package for fleetside models called the CST (Custom Sport Truck). Later dubbed Cheyenne, this package added strips of black-accented bright metal trim running from front to back...

Reproduction of the clips used to attach the rear side fin molding on 1959 full size Chevrolet models. This set of 11 clips will mount one fin molding. 2 required per vehicle.

Replacement style rear window glass molding installation clips for 1968-72 Chevy II and Nova models as well as a wide variety of additional GM models. Each clip is designed and manufactured to replicate the OE style clips...

Reproduction of the original Mustang rear tail light moldings designed to replace the originals on 1971-73 Mustangs. Moldings install above and below the rear honeycomb tail lamp panel. The aluminum anodized moldings are...

Door jamb repair plates for 1968-70 B-Body models. These embossed steel repair plates weld into the door latch area to replace the fatigued or cracked metal. Includes instructions for installation. Applications: 1968-70...

These beautiful inserts are precision cut to the original depth and dimension. All panels are complete with Bel Air script and crest emblems. Made in the USA! Fits: 1957 2 door Bel Air, hardtop, sedan, convertible, wagon...

Exact reproduction of the original factory molding clip set as found on 1962-66 Chevrolet short bed trucks. Each set is manufactured in steel, and comes with seal that seals the molding hole to prevent water and other...

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Reproduction pickup bed lower corner moldings for Fleetside pickup models. Each molding is preformed to fit the corber of your pickup bed, and coomes with preinstalled adhesive strip for easy peel-and-stick application. ...

Reproduction pickup bed lower corner moldings for Fleetside pickup models. Each molding is preformed to fit the corber of your pickup bed, and coomes with preinstalled adhesive strip for easy peel-and-stick application. ...

Reproduction driver side lower front bed rocker molding for 1973-79 Ford F-100, F-150, F-250, and F-350 shortbed pickup trucks. This trim piece installs on the lower bed, in front of the rear wheel. It is retained by three...

Reproduction tailgate outside finish panel molding plastic lens for Ford Bronco. Manufactured in red plastic, and finished with polished Ford lettering on the right side of the red reflector. Fasteners are included. Replaces...

Reproduction of the original roof drip moldings designed for use with 1967-68 Mustang Fastback models. Each molding is manufactured to factory specifications replicating the original in every detail. Replace worn or dented...

Reproduction of the original quarter panel extension molding designed for use with 1955 Chevrolet 210 sedan and station wagon models. This reproduction molding is manufactured in quality stainless featuring the correct...

Reproduction rear window center trim rubber pad for 1964-66 Barracuda fastback models.

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Reproduction, show quality, RH & LH die cast moldings featuring brilliant chrome plating as original. Superior fit and finish from all new tooling. Excellent fit. Replaces OE Part #'s : RH Side C3AZ-63423A18, LH Side...

Reproduction of the original center trunk lid molding designed for use on 1966 Impala, Bel Air and Caprice models. Each molding is stamped to OE specifications and will fit same as factory original. This molding mounts to the...

Reproduction front fender louvers for 1958 Impala / Bel Air models. These louvers are mounted on each fender just behind the headlamp bezels.

Reproduction door moldings for use on 1963 Impala standard models. Includes both LH, RH door moldings and attaching hardware. Note: Shipped oversize. No further discounts apply.

Reproduction of the original lower front door molding designed for use with 1962-66 Chevrolet Fleetside pickup truck models. This molding is manufactured in aluminum to correct factory specifications. For use with Fleetside...

One of the most common rust areas on 1969-70 Mustang Fastback's were the roof drip rail channels. This reproduction of the original roof rail channels will replace the old, damaged, or rusted originals exactly. Manufactured...

Reproduction trink lid molding hardware set for 1970-72 Dart and Scamp models. Designed to fit factory and reproduction trunk lid moldings and body panels. Applications 1970-72 Dodge Dart 1971-72 Plymouth Scamp

Correct reproduction of the original headlamp eyebrow molding designed for use on 1965 Impala and Full Size Chevrolet models. Each molding is manufactured in aluminum material and stamped to exact factory dimensions making...

Reproduction of the original quarter panel molding designed for use with 1956 Chevrolet Two-Ten Series 2 door models. Each molding is manufactured in quality stainless steel replicating the original in design and appearance...

Give your retro Gen5 Camaro a unique vintage touch with Retro USA?s ?69-inspired quarter panel molding. Inspired by the iconic designs of the 60?s and 70?s. Manufactured using chrome-plated injection-molded ABS plastic and...

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Measures approximately 3" wide. Installs on the lower quarter panel in front of the wheel opening on the drivers side. Installation...

Retaining screws for installation of moldings or other trim that requires a 31/964" diameter round washer head phillips screw. Each Phosphate treated screw measures 8-18 x 3/4". These screws can also be used on various GM,...

Reproduction upper side molding set for 1978-79 Ford Bronco. This six piece set includes upper fender, door, and quarter panel moulding for both side of the vehicle. Replaces Ford part#s D3TZ-1020938/9-B, D3TZ-16003/4-C, and...

Reproduction of the original front fender louvers (air vent extractors) designed for use with 1978-79 Camaro Z28 models. Each louver is manufactured in die-cast zinc replicating the original in appearance and fit. These...

OER® Authorized reproduction of the original front wheel opening molding for 1989-91 Chevrolet and GMC SUV models. Each molding is stamped to original factory specifications featuring correct contours and a bright finish...

Reproduction of the original clip set designed for use on 1969-72 Chevrolet and GMC pickup models. Replace your missing or damaged lower bed side molding clips with these quality reproductions for a correct fit. Will install...

Authentic reproduction of the original tail lamp filler panel for 1978-81 standard and Z/28 Camaro models. Each filler is manufactured in injection molded ABS to exact factory specs. The filler applique attaches to the rear...

Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...

Reproduction of the original upper front fender molding designed for use with 1962-66 Chevrolet and GMC pickup truck models. This molding is manufactured in aluminum to correct factory specifications. For use with Fleetside...

Replacement mastic sealer washers used to seal emblem studs and molding clips to the body on various GM vehicles. Use with molding nuts and thread cutting nuts. 4 piece set. Correct hardware can make any installation job...

Reproduction hood bar molding for 1956 Chevrolet models. Features correct chrome plating and factory style mounting points. Mounting hardware included.

Factory-style rocker panel moldings mount underneath each door and run from front fender to rear quarter panel. Moldings feature proper polished finish and contours for correct replacement. Sold as a pair. Mounting hardware...

Factory-style rocker panel moldings mount underneath each door and run from front fender to rear quarter panel. Moldings feature proper polished finish and contours for correct replacement. Sold as a pair. Mounting hardware...

Exact reproduction of the original factory molding clip as found on 1962-66 Chevrolet and GMC trucks. Each 1-1/2" long, 10-24 thread metal clip is manufactured in steel, and comes with seal that seals the molding hole to...

Exact reproduction of the original factory molding clip as found on 1962-66 Chevrolet and GMC trucks. Each 1-1/2" long, 10-24 thread metal clip is manufactured in steel, and comes with seal that seals the molding hole to...

Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...

Correct reproduction of the original rear wheel opening molding designed for use with 1969 Mustang coupe and convertible models. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the original...

Reproduction of the original quarter extension molding designed for use on 1970 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance. Includes...

To add the finishing touch to make your body side moldings shine to the original lustrous finish, you'll want to replace them with these beautifully reproduced side molding inserts. Each insert is "engine turned" to...

Reproduction of the original front fender wheel opening molding designed for use on 1977-79 Impala and Full Size Chevrolet models. Each molding is manufactured to replicate the original in contour and fitment. Quality...

Reproduction body molding clip for 1970-72 Ford F100, F250, and F350 trucks. This retaining clip is used to fasten the upper side moulding to the fender, door, and bedside of the truck. There are 30 of these clips on an...

Reproduction of the original wheel opening moldings designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Factory-style replacement of the rear window molding clips designed for use on 1968-70 Dodge Charger models. Each set includes enough clips and screws to install a complete set of front windshield moldings. Sold as a 40-piece...

Reproduction of the original lower cab molding designed for use with 1969-72 Chevy and GMC pickup truck models. In 1969, GM offered a deluxe trim and comfort package for fleetside models called the CST (Custom Sport Truck)....

Reproduction of the original 1967-68 Mustang tail lamp panel corner molding. This luggage compartment quarter panel extension molding is installed on either side of the rear of the trunk. This molding is used for the LH...

Factory-style replacement trunk lid molding for 1966 Coronet models. This molding mounts on the rear of the trunk lid. Features proper contours and stud location to correctly replace the original molding. Made in USA. Sold...

Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...

These factory-style replacement side scoop trim bezels feature the proper chrome plating and are painted black to correctly replace the originals. Set includes a LH upper and lower and a RH upper and lower trim bezel for a...

Each molding is individually wrapped and includes a complete set of screws for mounting. Each molding is produced to fit the wheel opening exactly! If you have one molding that needs replacement, you can now purchase it...

Reproduction of the original rocker panel moldings designed for use with 1955 Chevrolet Bel Air, 150, 210 2 door sedan models. Each molding is manufactured in stainless steel to original factory specifications replicating the...

Reproduction of the original lower trunk molding designed for use with 1964 Bel Air, and Impala SS models. Each molding is manufactured in stamped aluminum replicating the original contour and factory design. Will replace the...

This seven piece kit includes the moldings which extend from the rear ledge of the hood section around to the rear of the door. Kit includes: 1 Hood Ledge Molding 2 Upper Rear Fender Moldings 2 Outer Door Reve al Moldings 2...