Classic Industries Restoration Parts and Accessories - Console Parts

Restore the console in your vehicle with brand new reproduction parts from Classic Industries®. This new, reproduction top plate is manufactured from metal with a woodgrain finish in the correct grain and color. Mopar...

Reproduction of the automatic shifter selector dial for use on 1965-1966 Mustangs without a center console. Manufactured from injection molded clear plastic material and featuring a black background with red arrows and white...

Reproduction shift plate lamp housing originally installed on all 1964 automatic shift plates. Installs underneath the console top plate and holds the shifter lens and bulb. Made in stamped steel and bright plated as...

Reproduction of the original floor console assembly for use with 1968 Chevrolet Camaro models with console gauges. This reproduction console is manufactured to original factory specifications and replicates the original in...

Reproduction of the original 1969-70 black ABS plastic Mustang console base assembly. This injection molded reproduction is manufactured to exact factory specifications and includes a correctly grained surface for...

Restore the woodgrain on your 1970-76 A-body console with a brand new set of reproduction woodgrain inserts from Classic Industries®. If your console plate and lid are in good condition, but the woodgrain is scratched,...

Reproduction shifter bezel assembly for 1966-67 Nova models. This chrome bezel features correctly painted and recessed gear markings.

Correct reproduction of the original console lens for 1965 Impala SS 4/speed models. Each lens is specifically designed for Impala SS models with a 4-speed transmission. Slight variations from the automatic lens are...

Reproduction of the original style light teakwood 1969 Mustang console insert. For use with deluxe interiors, this console insert features a cutout for seat belt storage area. Make your Mustangs console look new again by...

Replace the missing or deteriorated console side cover in your 1966-67 Dodge Charger with this after market replacement. Originally, the side cover was manufactured of fiberboard and covered with a carpeted panel that was ...

Reproduction of the original floor shift plate designed for use on all 1967-68 Camaro 3 and 4-speed models without center console, and 1969 Camaro 3 speed models without center console. Shift plates are manufactured in...

Quality OER® reproduction of the original 1968-69 Console lid for use with all 1968-69 Camaro models. Each lid is manufactured in die cast zinc featuring correct a Madrid grained surface that matches the original in every...

Steeda billet aluminum shifter bezel for 1994-04 Mustangs. This easy to install bezel features a machined finish with the Ford logo. Fits manual transmissions only.

Don't have the factory 4 gauge pack in your Camaro? Now you can have them with this GM Performance kit. Upgrade your interior and keep an eye on vital vehicle functions. Includes oil pressure, volts, engine oil and...

OER® reproduction of the original console oil gauge designed for use on 1967 Camaro and Firebird models that included the optional console gauge package. Each gauge is designed and manufactured to replicate the original...

Reproduction of the original floor console assembly designed for use on 1968-69 Chevrolet Camaro models. Each console assemlbly is manufactured in quality injection molded ABS to factory specifications. Includes the upper and...

Reproduction of the original console trim designed for use on 1969-76 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the original console...

Reproduction of the original molded console top assembly designed for use on 1987-93 Mustangs without power mirrors. This injection molded reproduction is manufactured with original Ford tooling and includes correct textured...

Reproduction of the original manual trans shift plate originally installed on various models including 1967 Camaros with manual transmission and center console. Each shift plate is manufactured in die-cast zinc replicating...

OER reproduction of the one-piece standard shift plate and tunnel originally installed on all 1973-74 Nova models with a manual transmission and center console. Manufactured in die-cast zinc material just like the original....

Original console shifter bezel designed for use on 1987-93 Mustangs with consoles and manual shifters. Each bezel is manufactured in injection molded ABS and replicates the original in every detail including correct a...

Reproduction of the console shift lens backing plate originally installed on 1968-69 Firebirds with powerglide and Turbo Hydromatic transmissions with consoles. Mounts between the shift indicator lens and the bulb retainer...

Reproduction of the original style shift selector dial seal thats molded around a flexible steel insert for use on 1964-68 Mustangs and 1967-68 Cougars with automatic transmission. This shift selector dial seal fits into the...

This tachometer circuit board is made from flame-resistant fiberglass for strength and superior bonding with the copper traces. Nickel-plated connector pins and circuit traces prevent corrosion. Fits with point style or...

OER reproduction of the original automatic console shift plate designed for use on 1969 Pontiac Firebird models with Turbo Hydromatic transmissions. Manufactured in zinc die-cast metal replicating the original in quality and...

Reproduction console switch bezel for 2000-02 models. This bezel is for convertible switch only, plain.

Reproduction of the original console map door designed for use on 1964-66 Mustang models. Manufactured to factory specifications featuring original style grain, factory style chrome accents, and the correct ribbed center....

Reproduction of the original automatic transmission floor shift lever bezel cover designed for use on 1969-70 Mustangs. The cover assembly is manufactured to original factory specifications featuring a zinc die-cast bezel....

Reproduction of the original console lamp reflector designed for use on 1968-69 Camaro models. After years of console lamp operation, the original console lamp reflector can wear out and no longer fully serve its purpose....

1971-74 Mopar B and E Body reproduction of the floor foor console lid latch striker.

Correct reproduction of the original 1965-67 Chevy II and Nova shifter slider seal designed for use on 4/speed models. This shift slider is sometimes cracked or damaged after years of use. Replaement will help make your...

Reproduction automatic shift plate lenses for use on all 1965-67 Novas with powerglide and center consoles.

Reproduction of the original console lid arm designed for use on 1967 Camaro and 1967-69 Firebird console doors. This arm is manufactured in stamped steel and painted black replicating the original in fitment. The door arm...

Quality chrome plated reproduction. Originally used to trim the end of the shortened console when optional air conditioning was used. Will fit 1965 and 1966 Mustang consoles with air conditioning. Replaces Ford part#...

Reproduction of the original lower shift boot designed for use on 1966-76 Mopar A-bodfy models with manual transmissions. This item is manufactured from soft pliable molded rubber material and includes an integrated inner...

Have you dropped a modern overdrive gearbox into your classic? Then you?ll definitely want this console shift pattern emblem that mounts to the manual console shift plate on 1968-69 models. The shift pattern is laser etched...

Original console parts can be difficult to find and very expensive or impossible to repair. With our diecast reproduction restoration parts, you can bring your center console back to life with ease. These diecast pieces are...

Reproduction of the original backing plate that installed directly below the shift plate lens on various GM models with automatic transmission shift plates. Manufactured to correct dimensions in stamped steel. This...

Reproduction of the original shift boot retainer designed for use on 1965-68 Mustangs with manual transmissions. The shift boot retainer is mounted at the base of the floor and covers the edges of the shift boot. Manufactured...

Reproduction console armrest pad for 1994-04 Mustang models. Manufactured to factory specifications for proper fitment, and appearance.

Reproduction of the original shift tunnel assembly designed for use on 1973-81 Camaro models with 3 or 4 speed manual trans and 1970-81 Firebird models with manual transmissions. This shift tunnel is produced and manufactured...

Reproduction of the original dash indicator lenses for 1957 Chevy models. Includes plastic injection colored lenses for generator and oil.

Replacement console brackets for 1971-74 B-Body and 1970-74 E-Body models.

Reproduction of the original console rear lamp lens designed for use on 1967 Chevrolet Camaro and 1967-69 Pontiac Firebird models. Replace your melted, bubbled, or discolored original with this excellent reproduction....

Reproduction of the original molded console top assembly designed for use on 1987-93 Mustangs without power mirrors. This injection molded reproduction is manufactured with original Ford tooling and includes correct textured...

Reproduction of the original molded console top assembly designed for use on 1987-93 Mustangs without power mirrors. This injection molded reproduction is manufactured with original Ford tooling and includes correct textured...

Reproduction of the original 1971-73 Mustang and Cougar standard console padded lid. Each foam filled arm rest pad features a correctly grained surface, authentic contours and original mounting points. For use with the...

OER reproduction of the original console lid rubber bumper designed for use on all 1964 Impala and full size models with floor consoles. Each bumper is manufactured to exact specifications and will replace the original bumper...

Reproduction of the original parking brake handle seal designed for use on 1974-78 Mustang II, Maverick, and Comet models. Manufactured to factory specifications, each rubber seal is designed to replace the original including...

Reproduction of the original Mustang console armrest delete panel for use on 1987-93 models. Originally offered on the 1990 Mustang, this panel replaces your Mustang's center console armrest. Paint to match any interior...

A quality reproduction of the original console base housing will replace a broken or cracked original! This injection molded plastic reproduction features correct dimensions, mounting holes and textured finish. The console...

Exact duplicate of the original shift plate slider unit designed for use on 1967 Camaro, Firebird models with powerglide transmissions and 1968-72 Chevy II/Nova models with AT transmission. Each slider plate is precision...

Reproduction of the original rear console lamp assembly designed for use on a wide variety of Ford and Mercury models with center console. Manufactured to fit and install as original, can be used for original Ford or...

Reproduction of the original console trim designed for use on 1966-69 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal and chrome plated offering an authentic appearance. Over many years,...

Add the cup holder that GM left out of the 2nd Gen F-Body with the Holdster™ Armrest with drink holder replacement. This is NOT a plastic cap, but rather a new padded armrest and King size drink holder complete with a...

Reproduction automatic shift plate lenses for use on all 1965-67 Novas with center consoles and TH700-R4 and TH200-R4 upgraded transmissions with overdrive.

This decal is reproduced to duplicate the style, font, and spacing of the original instrument face. Machine-cut from high quality 3M material, designed to lie flat and wrinkle free. Made with a custom combination of printing...

Reproduction 1964-66 Mustang console ash tray with lid. Manufactured to exact dimensions, each ash tray will fit directly into the console assembly and replace the old or missing original.

Reproduction floor pan shifter hump for all 1966-67 Chevy II and Nova models equipped with a factory console. This stamped steel reproduction panel is welded to the floor pan and features correctly positioned studs to mount...

Reproduction of the original console trim designed for use on 1969-76 Mopar A-body models. Each console trim piece is manufactured in zinc die-cast metal offering an authentic appearance. Over many years, the original console...