Classic Industries Restoration Parts and Accessories - Tools

Removes spark plug wire boots from plugs with minimal effort. Designed for use on most cars and trucks.

Quick Spiff™ makes cleaning up almost fun. It?s so quick and easy, it?s like having your own personal tornado pick up whatever mess you make. Quick Spiff™ is completely self-contained: no tubes, no tanks, no...

Eleven precision steel blades are offset to make adjustment of valve tappets easy. Blades are approximately 1/2" wide by 4" long. Includes: .008" .010" .012" .013" .014" .015" .016" .018" .019" .020" .026"

A handy combination tool for the removal or installation of internal and external snap rings.

Essential tool for bolts with tight clearance like spark plugs and header bolts! 12-point for maximum finger traction. Set of three including 1/4" x 1/4", 1/4" x 3/8", 3/8" x 3/8" (12 pt x socket drive size). These belong in...

If you own a pair of RideTech coilovers, you will want this. The spanner wrench is used to adjust or tighten the ridetech coil retainer on the coilover which allows you to adjust the preload of the coil spring.

Make removing your door panels easier with this door panel removal tool. No more hassle trying to get the door panels off-- this tool removes the door panel fasteners, allowing the door panel to be easily removed.

When it comes to adjusting the door hinges so they accurately align with the body of the car, you might find most novice restorers frustrated. You can now easily adjust the hinges without the aggravation of trying to align by...

This tool is great for pulling oil or grease seals. Convenient tool that comes in handy when needed.

Make replacing or removing the windshield wiper arm easier with the windshield wiper arm removal tool. Will allow you to remove the wiper arm safely without damaging it.

When it comes time to install bearing races, you?ll find this tool to be an excellent way of saving time. Includes all you need to install or remove bearing races.

This pitman arm puller will make replacing the pitman arm easy. Specifically designed to pull pitman arms from most cars and trucks.

Spanner adjusting wrench for coil-over shocks. Note: No further discounts apply.

If your brake lines or fuel lines need to be flared, this is the right tool for you. This set allows the user to make single or double SAE flares to exact dimensions.

To test the quality of a paint job the Pro Gauge can't be beat! Basically, it's a device which measures paint thickness. Factory paint is usually four to five mils in thickness (a mil is one thousandth of an inch). By using...

Before touching up paint, you first must remove all rust, wax, and dirt or the rust will return and the paint won't adhere. This unique tool will scrub away all dirt, rust and wax. The results are touch up paint adheres,...

Professional grade crankshaft socket with degree wheel attachment. Can be used with 9" degree wheel 66791 and degree wheel kit 66787.

Special tool designed to pack the bearings so they stay where they belong. Works on most cars and trucks.

All important tool for adjusting coil-over shocks. Featured a rubberized handle for non-slip convenience. This special adjustable spanner wrench fits most applications. Made in USA

Have you ever tried to work on the door or quarter window regulator when the window glass is not supported? This unique tool is designed to hold the window glass in place while your working on the regulator.

This closed cell foam tape is coated on both sides with a pressure-sensitive adhesive. It is designed for attaching trim moldings, emblems and other articles where high internal strength is required.

This closed cell foam tape is coated on both sides with a pressure-sensitive adhesive. It is designed for attaching trim moldings, emblems and other articles where high internal strength is required.

Measure the weight of your car with this quality vehicle scale. This scale features weight for each wheel as well as total weight. Percentage weight is also available as well as front and rear percentages. Each of the...

Makes compressing the spring and removing the keepers a simple job because there is no need to remove the head. Faster than conventional compressors because there is no need to readjust the tool after each spring. Note: ...

This heavy-duty chisel allows you to easily separate spot welded or bonded panels. Save up to 15 minutes per panel replacement. Great for quarter panels, rocker panels and other pinch welded areas. Sharpened on two edges,...

Plugweld pliers make plug welding fast and easy. The unique copper alloy backing plate will not stick to welds! This design allows you to clamp panels at a precise spot and still allow for welding. Panels won?t separate and...

Copper alloy pad prevents burn through, allows higher welding temperature and better penetration.

This is the tool you've been looking for to remove antennas. Simple and compact, this tool fits most antenna bezel nuts. Compared to other tools, it is easier to carry and use and won't damage the nut and is of rugged, steel...

Finally, a convenient door aligning tool that will fit in your tool drawer! Features a hex stub to use with a breaker bar and socket for additional leverage.

The DSE spanner tool is used for adjusting your ride height on DSE suspension applications when using DSE coil-over shocks. Made in USA Important: Also requires part # D31061 adjusting tool (sold separately) when using...

Dynamats hardwood roller aids in the installation of Dynamat products by firmly rolling out bubbles and creases. It also helps to stretch and form Dynamat pressing it into all crevices and shaping it to the areas it is...

Don?t make an expensive mistake by trying to put on your decals without this application gel. Slide-On® Application Gel will provide you the greatest advantage of a perfect application; time. Slide-On contains a special...

Pulls dented sheet metal back into place. Drill a hole in the deepest part of the dent and insert hook or self-threading screw tips. Tap lightly with the 2-1/2 lb. slide hammer to remove dent. The 13 long shaft permits high...

Replacement hook and screw for X2290 (sold separately) slide hammer body dent removal tool.

Tests for voltage in 6 and 12 volt systems. This tester is useful for headlamps, taillights, turn signals, faulty sockets, connections, fuses and broken wires. Helps eliminate precious time when trying to figure out the...

Checks 6 volt and 12 volt circuits for voltage and spark plugs for spark. Ground clip and touch probe to point being tested. Tester bulb will light if power is present.

Replacement nose nut for body dent puller part # X2290.

Cleans and threads directly in the spark plug hole! Double ended for both 14mm and 18mm threads. Use with 13/16 spark plug socket.

Excellent tool allowing easy engine starting from under the hood. Features heavy gauge, rubber covered copper wire. Simply depress the button to jog or start the engine. Made in USA

Gauges and gaps all types of spark plugs from 0.20 to .100 (.50mm to 2.53mm) Includes tapered edge for gauging spark plugs. Specially designed hole with flange adjusts side wire of plug without pressuring center electrode.

Tests for fuel line pressure and vacuum leaks. Check for leaky valves, timing, fuel pump, vacuum, pressure and gas line leakage. Easy to read gauge with 3 foot hose and vacuum hose adapter fitting. Gauge measures vacuum from...

Safely removes spark plug cables. Prevents damage to cables when replacing. The handles and jaws are coated with heavy plastic for a sure grip.

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

Fits cutter sizes 3/8" to 3/4". Includes standard pilot pin with washer and is for use with 3/8" or larger drill chucks. Made in USA

Fits cutter sizes 3/8" to 3/4". Includes skip proof pilot drill with washer and is for use with 3/8" or larger drill chucks. Made in USA

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For use with Part # 11007 arbor. Made in USA

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Ideal for...