Classic Industries Restoration Parts and Accessories - Manual Trans

Reproduction leather shift boot for all 1987-93 Mustang models equipped with manual transmission. Made with genuine leather and replaces the original upper shift boot.

Full grain leather with hand stitching. Includes steel retaining plate. Exact reproduction of the original.

Reproduction leather shift boot for all 1979-86 Mustang models equipped with manual transmission. Made with genuine leather and replaces the original upper shift boot.

Reproduction of the original lock out swivel assembly designed for use with 1970-81 Chevrolet Camaro and Pontiac Trans Am models. When installed, this assembly will prevent the key from being removed from the ignition lock...

Reproduction manual shifter boot retainer. If your retainer was damaged while servicing your shifter, replace it with one of these reproductions.

Reproduction of the original floor shift boot for use on all 1967-68 Camaro 3 and 4 speed models without center console. Also fits 1969 Camaro 3 speed models without center console. The lower boot is manufactured from quality...

Reproduction of the original lower lock out rod designed for use with 1969 Firebird models with 4/speed manual transmissions. This rod is manufactured in stamped steel replicating the original in design and functionality. For...

OER® reproduction of the original 3-speed shift pattern emblem designed for use with 1968-69 Camaros 3-speed manual transmissions. This shift pattern plate is manufactured in die-cast zinc and features correct 3-speed...

Reproduction of the original black plastic tunnel located directly below the shift plate and extends downward to the rubber shift boot. This reproduction is manufactured in a precision injection molded black injection molded...

Reproduction of the original lower shift boot seal designed for use with 1970-81 Camaro and Firebird models with manual transmissions. Each boot is manufactured in quality EPDM rubber replicating the original in design,...

Reproduction of the factory original leather-wrapped shift ball to fit various 1982-02 Camaro Z28 and Firebird models equipped with 5-speed and 6-speed manual transmissions. Each reproduction shift ball is manufactured in...

OER® reproduction of the original 3-speed shift pattern emblem designed for use with 1968-69 Camaros 4-speed manual transmissions. This shift pattern plate is manufactured in die-cast zinc and features correct 4-speed...

Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...

Original GM replacement bolt used to connect the flywheel to the engine crankshaft for various 1958-91 Chevrolet models with 6 cylinder or V8 engines. Measures 7/16"-20 x 1". 6 required per vehicle. {fitment}

Reproduction of the original shift boot retainer plate designed for use on 1970-81 Camaro and Firebird models with 3/speed or 4/speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel...

Reproduction of the original gear shift lever designed for use with 3/speed column shift models with standard transmissions. This gearshift lever will replace the damaged, bent, or non functioning original. {fitment}

Correct reproduction of the original 4-speed console shift boot designed for use with 1962 Impala, Biscayne and Bel Air models originally equipped with a console and bucket seats. Each shift boot is manufactured in molded...

Correct reproduction of the original 4-speed console shift boot designed for use with 1962 Impala, Biscayne and Bel Air models originally equipped with a console and bucket seats. Each shift boot is manufactured in molded...

Correct reproduction of the original 4-speed shift boot designed for use with 1960-63 Impala and Full Size models. Manufactured in quality E.D.P.M. rubber and replicates the original for authenticity and quality. Installs on...

Reproduction of the original console lower shift boot for use on 1968-70 Mopar B-body models with floor shift manual transmission without console. Replace the deteriorated or missing shift boot to seal the area around the...

Reproduction of the original Hurst-type shift boot retainer plate installed on various GM models including 1969 Chevrolet Camaro models with 4 speed Hurst shifters. Works with original or reproduction Hurst shift boots. This...

Reproduction of the original clutch flywheel housing cover designed for use on various 1975-81 GM vehicles with Borg Warner T-10 manul transmissions. This cover is used to protect the clutch flywheel housing for vehicles with...

Reproduction of the original column shift arm bushing designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models with manual transmissions. Each bushing is manufactured in quality EPDM rubber to correct...

Correct reproduction of the original shift boot designed for use on 1960-63 Impala and Chevrolet Full Size models with console and manual transmissions. Each retaining ring is manufactured from stamped steel in the correct...

The rubber linkage grommets at the bellcrank area of the transmission linkage are subject to damage from heat and dirt. Replacing worn grommets will help reduce play in the shift linkage.

Precision-made urethane transmission mounts for 2010 to 2015 Camaro models. These high-performance mounts are built with laser-cut steel frames and made with high-durometer urethane for perfect drivetrain alignment and better...

Replacement Ford Borg/Warner T-18/T-19 manual transmission bearing retainer for various Ford and Mercury models. {fitment}

Replacement shift linkage bushings and hardware for 1955-57 Chevy models with manual transmission. Replace worn bushings to prevent missed shifts. Set includes bushings, washers, clips, and springs.

The Muncie gasket set includes the front and rear bearing retainer gasket, transmission cover gasket, clutch gear bearing retainer, and O-ring. This gasket kit will install on 4 speed Muncie transmissions with 327, 302, 350...

Replacement transmission gasket set for 1955-57 Chevy models with 3 speed manual. Leaking gaskets and seals should be replaced immediately to ensure trouble-free operation.

Reproduction 4-speed toploader shifter mounting plate for 1964-73 Ford Mustang. This plates mounts to the tranny and provides a mounting surface for the shifter mechanism. It is desgned to work with Mustang transmissions and...

Replacement manual transmission flywheel for various 1967-77 Ford and Mercury models including Mustang, Cougar, Ranchero, and F-Series trucks. It is balanced to factory specs and will fit and function exactly like the...

Reproduction 1969-70 Mustang gearshift boot for 3/speed and 4/speed non-console models with manual transmissions. This reproduction is produced to original factory specifications and include the correct E.P.D.M. rubber...

Reproduction of the original shift boot designed for use with 1969 Camaro and 1968-69 Firebird models with 4 speed Hurst shifters. Each shift boot is designed and manufqactured in quality EDPM rubber that matches the original...

Replacement automatic transmission flexplate for various 1966-74 Ford and Mercury models including Mustang, Cougar, Bronco, and F-Series Truck. It is balanced to factory specs and will fit and function exactly like the...

Replacement manual transmission fllywheel for various 1966-74 Ford and Mercury models including Mustang, Falcon, Comet, and Maverick. It is balanced to factory specs and will fit and function exactly like the original....

Replacement Ford 3-speed transmission gasket set for various Ford and Mercury models. Applications include Ranchero, Galaxie, Ranch Wagon, and F-Series Truck. {fitment}

Reproduction of the original GM shift boot and plate retainer for use on all 1967-70 Chevrolet Camaro models 4 speed manual transmissions without a floor console. This retainer is manufactured in stamped steel and used to...

OER reproduction of the one-piece standard shift plate and tunnel originally installed on all 1973-74 Nova models with a manual transmission and center console. Manufactured in die-cast zinc material just like the original....

Reproduction manual shifter boot ring. If your ring was damaged while servicing your shifter, replace it with this fine reproduction.

Reproduction shift boot for all 1994-2004 Mustang models equipped with manual transmission. Produced in synthetic leather to replicate the OEM part exactly.

Reproduction 1970 Hurst Mustang gearshift boot for 4/speed non-console models with manual transmissions. Produced to original factory specifications and include the correct E.P.D.M. rubber compound for long lasting...

Master rebuild kit for 1965-86 Ford and Mercury 3.03 3-speed manual transmissions. The 3.03 tranny is found in various Ford and Mercury models including Mustang, Cougar, Falcon, and F-Series Truck. This kit includes all of...

An MCA approved reproduction of the original lower shift boot for use on 1969 Mustang and Cougar models. Once installed, the shift boot protects the shifter assembly between the transmission and lower floor pan. Covers the...

Reproduction of the original simulated leather style shift boot designed for use on 1987-93 Mustangs. Now you can replace the worn out factory original shift boot with this reproduction simulated leather replacement boot and...

Side cover gasket for Muncie 4 speed transimissions. Applications: 1982-84 Camaro 1982 Firebird

Reproduction leather shift boot for all 1974-78 Mustang II models equipped with manual transmission. Made with genuine leather and replaces the original upper shift boot. {fitment}

Reproduction of the original lower shift boot designed for use on 1970 Hurst Mustangs with 4/speed manual transmissions. This lower shift boot offers a vast improvement from the original equipment boot. A thick bead of...

1964 - 1966 Manual Transmission, 8 cyl. 3 spd.

An MCA approved reproduction of the original lower shift boot for use on 1966-68 Mustang and 1967-68 Cougar models. Once installed, the shift boot protects the shifter assembly between the transmission and lower floor pan....

Reproduction of the original lower shifter boot with retainer designed for use on 1979-2004 Mustang models with manual transmission. This shift boot installs below the center console and helps prevent heat and debris from...

Reproduction of the original 1965-68 Mustang shift boot retainer bezel designed for use on 3/speed and 4/speed non-console models with manual transmissions. The bezel is mounted at the base of the floor, and holds the...

Master rebuild kit for 1962-66 Ford and Mercury T-10 4-speed manual transmissions. The T-10 tranny is found in various Ford and Mercury models including Mustang, Falcon, Comet, and Ranchero. This kit includes all of the...

Reproduction 4-speed rubber shift boot for various 1960-68 Ford and Mercury V8 models including Falcon, Fairlane, Ranchero, and Comet. This round rubber boot fits 4 speed manual transmission models without consoles. Each boot...

Replace your deteriorated or missing shift boot designed for use with 1963-65 Dodge and Plymouth B body models with manual transmission and without console. Each boot is manufactured to correct factory specifications offering...

Manual Transmission, 1965 - 79 4 Speed{fitment}

Replace your deteriorated or missing shift boot designed fir use with 1963-65 Dodge Dart, Plymouth Barracuda, Valiant models. Each boot is manufactured to correct factory specifications offering an authentic appearance and...

An MCA approved reproduction of the original lower shift boot for use on 1965-68 Mustang and 1967-68 Cougar models. Once installed, the shift boot protects the shifter assembly between the transmission and lower floor pan....

Original console shifter bezel designed for use on 1987-93 Mustangs with consoles and manual shifters. Each bezel is manufactured in injection molded ABS and replicates the original in every detail including correct a...