Classic Industries Restoration Parts and Accessories - Boots

Reproduction leather shift boot for all 1987-93 Mustang models equipped with manual transmission. Made with genuine leather and replaces the original upper shift boot.

Full grain leather with hand stitching. Includes steel retaining plate. Exact reproduction of the original.

Reproduction leather shift boot for all 1979-86 Mustang models equipped with manual transmission. Made with genuine leather and replaces the original upper shift boot.

Reproduction manual shifter boot retainer. If your retainer was damaged while servicing your shifter, replace it with one of these reproductions.

Reproduction of the original floor shift boot for use on all 1967-68 Camaro 3 and 4 speed models without center console. Also fits 1969 Camaro 3 speed models without center console. The lower boot is manufactured from quality...

Reproduction of the original lower shift boot seal designed for use with 1970-81 Camaro and Firebird models with manual transmissions. Each boot is manufactured in quality EPDM rubber replicating the original in design,...

Reproduction of the original upper shift boot designed for use on 1970-81 F-Body models with manual transmission. Each boot is manufactured in quality molded rubber to replicate factory specifications and provide an original...

Reproduction of the original shift boot retainer plate designed for use on 1970-81 Camaro and Firebird models with 3/speed or 4/speed manual transmissions. Each gearshift boot retainer plate is manufactured in stamped steel...

Reproduction 1969-70 Mustang gearshift boot for 3/speed and 4/speed non-console models with manual transmissions. This reproduction is produced to original factory specifications and include the correct E.P.D.M. rubber...

Correct reproduction of the original 4-speed console shift boot designed for use with 1962 Impala, Biscayne and Bel Air models originally equipped with a console and bucket seats. Each shift boot is manufactured in molded...

Correct reproduction of the original 4-speed console shift boot designed for use with 1962 Impala, Biscayne and Bel Air models originally equipped with a console and bucket seats. Each shift boot is manufactured in molded...

Reproduction manual shifter boot ring. If your ring was damaged while servicing your shifter, replace it with this fine reproduction.

Reproduction 1970 Hurst Mustang gearshift boot for 4/speed non-console models with manual transmissions. Produced to original factory specifications and include the correct E.P.D.M. rubber compound for long lasting...

An MCA approved reproduction of the original lower shift boot for use on 1969 Mustang and Cougar models. Once installed, the shift boot protects the shifter assembly between the transmission and lower floor pan. Covers the...

Reproduction of the original simulated leather style shift boot designed for use on 1987-93 Mustangs. Now you can replace the worn out factory original shift boot with this reproduction simulated leather replacement boot and...

Correct reproduction of the original 4-speed shift boot designed for use with 1960-63 Impala and Full Size models. Manufactured in quality E.D.P.M. rubber and replicates the original for authenticity and quality. Installs on...

Reproduction of the original console lower shift boot for use on 1968-70 Mopar B-body models with floor shift manual transmission without console. Replace the deteriorated or missing shift boot to seal the area around the...

Reproduction of the original Hurst-type shift boot retainer plate installed on various GM models including 1969 Chevrolet Camaro models with 4 speed Hurst shifters. Works with original or reproduction Hurst shift boots. This...

Reproduction leather shift boot for all 1974-78 Mustang II models equipped with manual transmission. Made with genuine leather and replaces the original upper shift boot. {fitment}

Reproduction of the original lower shift boot designed for use on 1970 Hurst Mustangs with 4/speed manual transmissions. This lower shift boot offers a vast improvement from the original equipment boot. A thick bead of...

An MCA approved reproduction of the original lower shift boot for use on 1966-68 Mustang and 1967-68 Cougar models. Once installed, the shift boot protects the shifter assembly between the transmission and lower floor pan....

Reproduction of the original 1965-68 Mustang shift boot retainer bezel designed for use on 3/speed and 4/speed non-console models with manual transmissions. The bezel is mounted at the base of the floor, and holds the...

Reproduction 4-speed rubber shift boot for various 1960-68 Ford and Mercury V8 models including Falcon, Fairlane, Ranchero, and Comet. This round rubber boot fits 4 speed manual transmission models without consoles. Each boot...

Replace your deteriorated or missing shift boot designed for use with 1963-65 Dodge and Plymouth B body models with manual transmission and without console. Each boot is manufactured to correct factory specifications offering...

Replace your deteriorated or missing shift boot designed fir use with 1963-65 Dodge Dart, Plymouth Barracuda, Valiant models. Each boot is manufactured to correct factory specifications offering an authentic appearance and...

An MCA approved reproduction of the original lower shift boot for use on 1965-68 Mustang and 1967-68 Cougar models. Once installed, the shift boot protects the shifter assembly between the transmission and lower floor pan....

Reproduction 4-speed rubber shift boot for various 1960-68 Ford and Mercury 6-cylinder models including Falcon, Fairlane, Ranchero, and Comet. This round rubber boot fits 4-speed manual transmission models without consoles....

OER reproduction of the original floor shift boot manufactured in quality molded rubber replicating the original GM boot in authenticity and fitment. Originally installed on all 1967-68 Camaro models with 4 speed trans, 1969...

Reproduction of the original 1969-70 Mustang chrome shift boot retainer bezel designed for use on 3/speed and 4/speed non-console models with manual transmissions. The bezel is mounted at the base of the floor, and holds the...

Reproduction manual floor shift boot for various 1965-68 Ford Mustang and 1967-68 Mercury Cougar with 3 or 4-speed transmissions. This boot protects the shifter assembly between the transmission and lower floor pan. The...

Replace your deteriorated or missing shift boot designed fir use with 1964-65 Chrysler, C body, and Dodge, Plymouth B body models with manual transmission. Each boot is manufactured to correct factory specifications offering...

Replace your deteriorated or missing shift boot designed for use with 1963-65 Dodge and Plymouth B body models with manual transmission. Each boot is manufactured to correct factory specifications offering an authentic...

Reproduction of the original shift boot designed for use with 1969 Camaro and 1968-69 Firebird models with 4 speed Hurst shifters. Each shift boot is designed and manufqactured in quality EDPM rubber that matches the original...

Reproduction of the original rubber floor shift boot designed for use with 1973-83 Chevrolet and GMC models with a 4 speed manual transmission. Each shift boot is manufactured in quality EPDM rubber featuring correct mounting...

Reproduction transmission gearshift lever upper boot for 1966-76 Ford F-Series Trucks. This molded rubber, accordian-style, boot covers the transfer case shifter opening on the floor. Replaces Ford part# C6TZ-7B118-A....

Reproduction manual floor shift boot for 1970-77 Ford Maverick and 1971-77 Mercury Comet models with standard transmissions. Each boot is manufactured to original factory specifications and replicates the original in fit and...

Reproduction of the original floor shift boot designed for use on 1947-1966 Chevrolet and GMC pickup truck models. Each shift boot is designed and manufactured to replicate the original in fit and appearance. Manufacturer in...

Correct reproducton shif boot for 1959-62 Chevrolet Corvette 4-speed models. Manufactured to factory specifications from injection molded EPDM rubber as original. {fitment}

Reproduction transmission gearshift lever upper boot for 1977-79 Ford F-Series Trucks without overdrive. This molded rubber, accordian-style, boot covers the transfer case shifter opening on the floor. Replaces Ford part#...

Reproduction transmission gearshift lever upper boot for 1990-96 Ford F-Series Trucks and Broncos. This molded rubber, accordian-style, boot covers the transfer case shifter opening on the floor. Replaces Ford part#...

Reproduction of the original floor shifter boot designed for use with 1967-72 Chevrolet and GMC truck models with 4 speed manual transmissions. Each shift boot is manufactured in quality EPDM rubber replicating the original...

Reproduction of the original shift boot designed for use on all 1948-59 Chevrolet and GMC truck models with column shift. Each shift boot is manufactured to factory dimensions and replaces the old or worn out original...

Designed for large hole shifter installations, the Hurst Super Boot and Plate is for use with Competition/Plus Shifters. Measures 7-3/4" x 8-3/4", and comes complete with boot, chrome ID plate and all mounting hardware.

1979 - 2004 lower shift boot, E.P.D.M. rubber{fitment}

Reproduction of the original lower shifter boot for use with 1982-1992 Camaro and Firebird models. Manufactured to factory specifications with pre-punched mounting holes. This is the lower boot that is bolted to the shift...

Repair your worn out or torn transfer case shift boot with this OE style replacement. For use with 1967-1972 Chevrolet/GMC 4x4 trucks. Holes are pre cut making installation quick and easy.

Reproduction lower shifter boot for 1993-02 models. Manufactured to factory specifications with pre-punched mounting holes. This is the lower boot that is bolted to the shift tunnel. Applications: 1993-02 Camaro

The Shifter boot fits Classic consoles HumpHugger Cruisers and Saddle Cruisers consoles. Made in USA

Protect the sensitive clutch componets from dust, dirt, mud, water and other elements with this clutch lever rubber boot cover. As with any rubber part located near heat, the original stock boot can dry rot, become brittle...

These universal application rings are a nice way to add a custom touch to your Mustang. Hand brake ring works with our custom hand brake assembly #7000F.

Reproduction clutch release lever dust boot for various 1965-79 Ford F100, F-150, F250, and F350 Truck, Econoline, and Bronco models. This direct replacement black rubber boot installs on the transmission and prevents dirt...

Reproduction transfer case gearshift lever upper boot and retainer for 1966 Ford Broncos. This molded rubber, accordian-style, boot covers the transfer case shifter opening on the floor. Replaces Ford part# C6TZ-7277-A....

Reproduction transmission gearshift lever boot for 1948-52 Ford F-Series Trucks. This molded rubber boot covers the transmission shifter opening on the floor. Replaces Ford part# 99A-7242-B. Applications: 1948-52 F1 1948-52...