T71207 - 1973-91 Chevrolet, GMC Fleetside Pickup; Bed to Frame Mounting Hardware Set; 32-piece; Features 6 Short Bolts. 2 Long Bolts
T71207 - 1973-91 Chevrolet, GMC Fleetside Pickup; Bed to Frame Mounting Hardware Set; 32-piece; Features 6 Short Bolts. 2 Long Bolts
In Stock Now!
- Product #: T71207
- CATEGORY: Body Mount Bushings
- BRAND: OER Authorized
- SHIP TYPE: Standard |
1973-91 Chevrolet, GMC Fleetside Pickup; Bed to Frame Mounting Hardware Set; 32-piece; Features 6 Short Bolts. 2 Long Bolts
Reproduction bed-to-frame mounting bolt set for a wide variety of 1973-91 Chevrolet and GMC fleetside pickup truck models. Each 32-piece set includes bed-to-frame mounting hardware for fleetside bed. Two of the bolts in this kit are longer than the other 6 bolts. These are OE-style shouldered bolts, like the original factory bolts. They are not threaded all the way down the stem like cheaper aftermarket replacements. Fits long bed or short bed fleetside models equipped with 6 short bolts and 2 long bolts. Check the bolt length on your truck before ordering.
specs
Where do the long bolts usually go?- GM never spelled this out in parts literature. None of the OE-style kit descriptions actually say ?the long bolts go in position X.? They just say the kit includes 6 short and 2 long bed-to-frame bolts for the fleetside bed.
- In practice, when you test-fit on a truck that does use the longer pair: The long bolts are used at the two mounting points with the tallest ?stack?:
- Bed floor
- Bed crossmember
- Rubber pad/spacer
- Frame rail
- Any additional shim plates
- At the rear pair of mounts (one on each side) under the tailgate area, because the frame kicks up and the cross sill/pad stack is deeper there than at the front.
- Position # 1 - (2) OE Style Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- Position # 2 - (2) OE Style Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- Position # 3 - (2) OE Style Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- Position # 4 - (2) OE Style Long Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- 1973-1987 Chevrolet Fleetside Pickup Truck with Steel Floor
- 1973-1987 GMC Fleetside Pickup Truck with Steel Floor
- Each 32-Piece Body Mount Set Includes:
Product Specifications
Shipping Dimensions- Weight: 7 Lbs
- Dimensions: L: 14" x W: 5" x H: 3"
- Ship Type: Standard |
- Some trucks require 6 short bolts and 2 long bolts. Other trucks require all 8 bolts to be short bolts.
- The 2 long bolts in this set measure: 10 5/8" long. Check the bolt lengths on your truck before ordering.
- If your truck does not have the long bolts, use part # T71207A instead. T71207A includes all 8 short bolts.
1973-91 Chevrolet, GMC Fleetside Pickup; Bed to Frame Mounting Hardware Set; 32-piece; Features 6 Short Bolts. 2 Long Bolts
Reproduction bed-to-frame mounting bolt set for a wide variety of 1973-91 Chevrolet and GMC fleetside pickup truck models. Each 32-piece set includes bed-to-frame mounting hardware for fleetside bed. Two of the bolts in this kit are longer than the other 6 bolts. These are OE-style shouldered bolts, like the original factory bolts. They are not threaded all the way down the stem like cheaper aftermarket replacements. Fits long bed or short bed fleetside models equipped with 6 short bolts and 2 long bolts. Check the bolt length on your truck before ordering.
specs
Where do the long bolts usually go?- GM never spelled this out in parts literature. None of the OE-style kit descriptions actually say ?the long bolts go in position X.? They just say the kit includes 6 short and 2 long bed-to-frame bolts for the fleetside bed.
- In practice, when you test-fit on a truck that does use the longer pair: The long bolts are used at the two mounting points with the tallest ?stack?:
- Bed floor
- Bed crossmember
- Rubber pad/spacer
- Frame rail
- Any additional shim plates
- At the rear pair of mounts (one on each side) under the tailgate area, because the frame kicks up and the cross sill/pad stack is deeper there than at the front.
- Position # 1 - (2) OE Style Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- Position # 2 - (2) OE Style Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- Position # 3 - (2) OE Style Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- Position # 4 - (2) OE Style Long Carriage Bolts with (2) Nuts and (2) Flat Washers and (2) Lock Washers (8-piece set) For LH and RH Sides
- 1973-1987 Chevrolet Fleetside Pickup Truck with Steel Floor
- 1973-1987 GMC Fleetside Pickup Truck with Steel Floor
- Each 32-Piece Body Mount Set Includes:
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 7 Lbs
- Dimensions: 14" x 5" x 3"
- Ship Type: Standard |
- Some trucks require 6 short bolts and 2 long bolts. Other trucks require all 8 bolts to be short bolts.
- The 2 long bolts in this set measure: 10 5/8" long. Check the bolt lengths on your truck before ordering.
- If your truck does not have the long bolts, use part # T71207A instead. T71207A includes all 8 short bolts.