1967-72 Chevrolet, GMC Truck; Sniper; EFI; Fuel Tank System; With Pump And Sender; Under Bed Mount

Holley Sniper EFI conversion fuel tank system is galvanized and then powder coated to maximize corrosion resistance. It features OEM-style internal baffling, including an extra large internal fuel tray to promote optimal fuel pump performance.

• 1967 - 1967 Chevrolet C10 Panel
• 1967 - 1971 Chevrolet C10 Pickup
• 1967 - 1971 Chevrolet C10 Suburban
• 1967 - 1967 Chevrolet C20 Panel
• 1967 - 1971 Chevrolet C20 Pickup
• 1967 - 1971 Chevrolet C20 Suburban
• 1967 - 1971 Chevrolet C30 Pickup
• 1967 - 1971 Chevrolet K10 Pickup
• 1967 - 1971 Chevrolet K10 Suburban
• 1967 - 1967 Chevrolet K20 Panel
• 1967 - 1971 Chevrolet K20 Pickup
• 1967 - 1971 Chevrolet K20 Suburban
• 1968 - 1971 Chevrolet K30 Pickup
• 1967 - 1971 Chevrolet Truck

• 1967 - 1972 GMC C15/C1500 Pickup
• 1967 - 1972 GMC C15/C1500 Suburban
• 1967 - 1972 GMC C25/C2500 Pickup
• 1967 - 1972 GMC C25/C2500 Suburban
• 1967 - 1972 GMC C35/C3500 Pickup
• 1967 - 1972 GMC K15/K1500 Pickup
• 1967 - 1972 GMC K15/K1500 Suburban
• 1967 - 1972 GMC K25/K2500 Pickup
• 1967 - 1972 GMC K25/K2500 Suburban
• 1968 - 1972 GMC K35/K3500 Pickup
• 1967 - 1972 GMC Truck

This tank is a direct, bolt-in and Supports up to 550 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw.

Tank Dimensions:32-1/4" x 20-1/2" x 9-3/4" (including the mounting flange) Size is 28" x 20-1/2" x 9-3/4" (measured without the mounting flange)

• Tank is coated galvanized steel then powder coated silver for total corrosion protection
• 255 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
• Sender has 1/4" NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting
• Fuel level sender included with the correct Ohm range for your factory gauges
• Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car
• EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation
• Fits and looks like an OE tank when installed
• Bolt in solution for your EFI conversion

• Fuel Tank
• Sending Unit
• Fuel Pump Module
• Detailed Installation Instructions

Steel filler neck is not included. You must use your existing stock filler neck.

• Color: Silver
• Drain Plug: No
• Finish: Powdercoated
• Free Flow LPH: 255
• Fuel Sending Unit Ohms: 0-90 Ohms
• Fuel System Type: Gasoline
• Gallon Capacity: 18

Important: Not for use on pollution controlled vehicles. See Emission Notes below.

Note: Shipped double oversize.

For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.

For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.

• 1965 and Older, USA Manufactured, California Certified Vehicles
• 1967 and Older, USA Manufactured, Federally Certified Vehicles