1962-67 Chevy II / Nova Mini Subframe Deluxe Set With Black Control Arms And 1-1/2" Drop

This mini sub frame set eliminates the factory strut rods, adding adjustable forward control arm mounts, that add stability, improved steering response and over 2" of ground clearance for your early Chevy II/Nova. By eliminating the bind of factory str ut rods you are able to maintain proper alignment without the use of a "Lock Out Plate" and gain a free-working up and down motion in the lower control arm. The results are better ride quality and positive road feedback. Sets accommodate both the factory sway bar and aftermarket 1" bars (aftermarket 1-1/8" bars will not work). The one-piece crossmember ties both frame rails together by bolting in where the factory strut rod mounts were located, providing additional strength. It also adds only 2 lbs to the car after removing the heavy factory strut rods and bulky strut rod mounts. There is no cutting or welding required. The rear of the lower control arm mounts in the factory location and the original camber adjustments are used. The front of the lower con trol mounts to the new crossmember and adds a forward caster adjustment to guarantee a perfect, simple and hassle-free alignment.

Standard set includes:

• tubular upper and lower control arms
• bolt-in 1/4" thick steel cross m ember with forward mounting
• 4 alignment cam kits
• Grade 8 hardware
• low friction, long life bushings
• premium upper and lower ball joints.
• coil springs
• rubber spring perches
• shocks

Note: Shipped oversize.