H86670R - Holley; Ultra Street Avenger; 670 CFM Carburetor; Aluminum With Red Anodized Finish
H86670R - Holley; Ultra Street Avenger; 670 CFM Carburetor; Aluminum With Red Anodized Finish
Discontinued Item,
No Longer Available
- Product #: H86670R
- CATEGORY: Carburetors - Performance
- BRAND: Holley
- SHIP TYPE: Standard |
- Emissions Compliance: Non-CARB Compliant |
Holley; Ultra Street Avenger; 670 CFM Carburetor; Aluminum With Red Anodized Finish
The Holley Ultra Street Avenger™ Series carburetors feature all-aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Intended for serious street enthusiasts. Calibrated for monster low-end torque, awesome acceleration, and unmatched top-end horsepower.
Features:- Shiny with red anodized billet aluminum metering blocks/base plate for good looks and true gasket sealing
- Ultra Street Avengers feature an optimized street calibration that works-out-of-the-box
- Factory preset electric choke for easy startups
- Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
- 4 corner idle allows you to precisely control your idle system
- Built in, clear fuel level sight glass for easy, no mess fuel level adjustments
- Aluminum construction for a 43% weight savings
- Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
- Fuel line kit included so there are no unnecessary trips back to the parts store
- Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
- Barrels: 4
- Billet Color: Red
- Booster: Straight
- CFM: 670
- Choke: Electric
- Finish: Shiny
- Fuel: Gasoline
- Fuel Inlet: Dual
- Material: Aluminum
- Model: 4150
- Primary Main Jet: 63
- Primary Power Valve: 6.5
- Primary Pump Nozzle Size: 31
- Secondaries: Vacuum
- Secondary Main Jet: 73
- Supercharged Application: No
- Throttle Bore: 1.6875"
- Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port
Important: Not for use on pollution controlled vehicles. See Emission Notes below.
Emission Note 1:For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.
For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
This product is available for all vehicles.
Product Specifications
Shipping Dimensions- Weight: 13 Lbs
- Dimensions: L: 13" x W: 12" x H: 8"
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
Holley; Ultra Street Avenger; 670 CFM Carburetor; Aluminum With Red Anodized Finish
The Holley Ultra Street Avenger™ Series carburetors feature all-aluminum construction and are equipped with metering blocks and a base plate made from 6061-T6 billet aluminum. Intended for serious street enthusiasts. Calibrated for monster low-end torque, awesome acceleration, and unmatched top-end horsepower.
Features:- Shiny with red anodized billet aluminum metering blocks/base plate for good looks and true gasket sealing
- Ultra Street Avengers feature an optimized street calibration that works-out-of-the-box
- Factory preset electric choke for easy startups
- Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
- 4 corner idle allows you to precisely control your idle system
- Built in, clear fuel level sight glass for easy, no mess fuel level adjustments
- Aluminum construction for a 43% weight savings
- Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
- Fuel line kit included so there are no unnecessary trips back to the parts store
- Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
- Barrels: 4
- Billet Color: Red
- Booster: Straight
- CFM: 670
- Choke: Electric
- Finish: Shiny
- Fuel: Gasoline
- Fuel Inlet: Dual
- Material: Aluminum
- Model: 4150
- Primary Main Jet: 63
- Primary Power Valve: 6.5
- Primary Pump Nozzle Size: 31
- Secondaries: Vacuum
- Secondary Main Jet: 73
- Supercharged Application: No
- Throttle Bore: 1.6875"
- Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port
Important: Not for use on pollution controlled vehicles. See Emission Notes below.
Emission Note 1:For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.
For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
This product is available for all vehicles.
Product Specifications
Shipping Dimensions- Weight: 13 Lbs
- Dimensions: 13" x 12" x 8"
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
