KBS DiamondFinish; TopCoat; Gloss Clear; 5 Gallon Pail

DiamondFinish Gloss Clear TopCoat is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal, for topcoating direct-to-metal, or to coat over any other paint/primer application. The Clear Coat formula can be applied Direct To Metal or over other coatings. This high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.

Apply directly to Painted Surfaces with Minimal Surface Prep. Incredibly tough and hard like no other clear coat on the market. Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun. Unlike two-part coatings, no hardener is needed with DiamondFinish. Just stir and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.

Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part or Two Part paints. It can also be applied to Non Ferrous metals including Aluminum, Alloys, Brass, Chrome and Copper

Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone. Graffiti Resistant: because of its chemical resistance, grafitti just won't stick and can be removed simply with a solvent soaked rag. Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 300° Fahrenheit.

• Protecting steel and plastic bumpers paint work
• Automotive aluminium fitting, fuel tanks and parts
• Protecting existing paint work from physical damage
• Prevents chemical attack from acids and alkalis on existing paint work
• Protects paint work from all fuels
• Custom automotive refinish

• Pint of DiamondFinish Clear could cover 50 sq. ft. single coat coverage
• Single component formula
• Over 60% solids
• Direct to Metal application - no additives needed
• Apply directly to painted surfaces
• Tougher and harder than 2 part clear coats
• Seals both paints and metals
• Self leveling (no brush marks)
• Simple brush or spray application
• High temperature resistance suitable for motors and brake callipers
• Permanent UV stability
• High chemical resistance (including fuels)
• Graffiti proof
• Recoat in 1-2 hours
• Seals ferrous and non ferrous metals
• Breakthrough High Solids Coating Technology