1949 Oldsmobile Series 88 Parts

Reproduction window stops for various 1941-61 Chevrolet models. Cushion (stem bumper), window stop, front, rear, quarter windows, lower. Replaces #4131052. For front and rear door, rear side and quarter windows as req'd. 7/8"...

Original GM coat hook designed for use on the various 1967-82 GM models listed. Each coat hook is injection molded in black matching the original grain in appearance, and fitment. Replace your broken or missing interior coat...

Chrome plated, stamped steel, headlight bulb retaining ring. Beautiful reproduction of the original GM item, features 3 tabs to secure the headlight bulb into the bucket. Authentic original-looking steel ring for 1940-54...

Rubber 'cap' that attaches to the top of the door jamb windlace on many 1930's to 1960's Oldsmobile, Buick and Cadillac convertibles and two door hardtops. A piece which is often missing or deteriorated. Sold in pairs.

Rear Wheel Stud, Left Hand Thread, for 1937-64 Oldsmobile and various other GM models. Sold individually. {specs} LH thread rear wheel stud for: 1937-60 Oldsmobiles all models 1961-64 Oldsmobile 88, 98 and Starfire models...

Rubber hood to fender bumper for various 1948-52 Olds, 1949 Cadillacs, and many 1949-54 Buicks. Locates on upper edge of front fender and prevents the hood from hitting the fender when closed. Six to eight used per car, check your vehicle for exact number required. Sold Individually. Buick Applications: 1949-54 many models Cadillac Applications: 1949 Sixty Special, 61, and 62 Series Oldsmobile Applications: 1948-52 Ninety-Eight 1949-52 Super 88, 88, 88A, and 76 Series Models

Upper radiator hose for all 1935-52 Oldsmobiles (except 1948 Olds 98, and 1952 models with 2nd type (curved) upper hose).

Stabilizer bar bushings for 1939-57 Oldsmobile front stabilizer bar, 1941-56 Oldsmobile rear stabilizer bar, and 1949-57 Buick front stabilizer bar. Sold in a pair to service one stabilizer bar. Buick Applications: 1949-57...

Single button power window switch assembly for right front door and rear doors or quarter panels. Switch assembly includes bezel, sold individually. Buick Applications 1949-53 All Oldsmobile Applications 1948 Ninety Eight...

Counter sunk, flat headed bolts with lock washers are 1" long and have 5/16"-24 thread as original. Package of 5 bolts to service one door. Buick Applications: 1946-60 All Models Oldsmobile Applications: 1946-60 All Models...

Reproduction fuel cap for a wide variety of Buick and Oldsmobile passenger car models. Produced in stamped steel construction featuring bright cadmium plating and square rivet head in center of cap for authentic original...

Exact copy of the original part with cadmium plated finish. Buick Applications: 1949-58 all models Oldsmobile Applications: 1941-48 all models 1949-58 Oldsmobile 76, 88, Super 88 and 98 models (w/ vertically mounted spare...

Reproduction of the original style junction block designed for use with various 1942-55 General Motors vehicles. Reproduction wire terminal junction which mounts on the inner fender on a variety of GM models. This junction...

Headlight bucket to fender mounting pad to fit a wide variety of 1940-56 GM models. Serves as a seal from the headlamp assembly to the fender Buick Applications: 1949 Super & Roadmaster 1950-53 all models Cadillac Applications: 1940-56 most models Oldsmobile Applications: 1940-50 all models (except 1950 98) 1951 88A

Front coil spring insulator (spring to frame) for all 1941-64 Oldsmobile 88, 98 and Starfire. Sold individually.

Nut and bolt rubber insulators for 1935-60 Oldsmobiles and Buicks. Used as a cushion under bolts, nuts and washers to prevent paint chips and water damage. Assorted sizes. Sold in a 48 piece set.

Switch retainer for single button power window switch on 1948-58 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-57 Chevrolet and Pontiac. Buick Applications 1948-58 all models Cadillac Applications 1948-53 all models ...

Door latch striker to door jamb mounting screw package for 1949-53 Buick, Cadillac and Olds models. Screws with countersunk flat heads and lock washers are 1-5/16" long and have 5/16"-24 thread as original. Set of six screws...

Lower control arm pivot pin seal for all 1936-56 Oldsmobiles and 1937-56 Buicks. Four required per vehicle, sold individually.

Front wheel bearing dust cap for all 1939-56 Oldsmobiles. Sold individually.

Reproduction chrome convertible top handle for various 1948-54 GM convertible models. Each handle includes mounting screw and spring washer. Replaces GM part # 4562304. Buick Applications: 1949-53 All Convertible Models ...

Want to unlock more power from your engine and actually burn less gas? Through an intensive R&D process, E3 has created a spectacular new spark plug that creates the industry’s fastest spark growth and fastest combustion...

Reproduction of the original accessory deflector in polished stainless steel. Deflector clamps to tail pipe with included hardware and can be used on any 1-1/2 inch pipe. Sold individually Buick Applications: 1935-55 all...

Trunk and tail gate 'Hydra-Matic Drive' emblem insert for all 1947 Oldsmobiles, all 1948 models except 98, all 1949 station wagons and all 1950 Deluxe station wagons equipped with Hydra-Matic transmission. Red background and silver lettering like the original, this GM licensed reproduction measures 5 3/8" wide x 1 3/4" high. Oldsmobile Applications: 1947 all 1948 all (except 98) 1949 all station wagons 1950 all Deluxe station Wagons

Switch reinforcement for single button power window switch on 1948-58 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-57 Chevrolet and Pontiac. Buick Applications 1948-58 all models Cadillac Applications 1948-53 all...

Reproduction power seat switch for a variety of 1948-53 GM models. Sold individually. Comes with beautifully detailed die-cast bezel that is chrome-plated and highly polished to perfection. Buick Applications 1948-53 All ...

Bezel measures 7 1/2" long by 2 3/4" wide and has an opening for the switch. Check your car for proper application. Use with lens number 156506L. Buick Applications: 1950-56 closed models Oldsmobile Applications: 1949-64...

Rear shock links for lever action shock absorbers on all 1941-50 Oldsmobiles, and 1951 88A models. These shock links measure 8 1/2 inches from the center of the stud to the end of the link, and include bushings and attaching...

Light tan with dark brown printed pattern material is sold by linear yard, approximately 56 inches by 36 inches. This is the material only. It will need to be cut and sewn to fit trunk floor by an upholstery shop. Most models...

Correct 6 volt replacement dimmer switch for various 1930-70 classic American vehicles including 1947-54 Chevrolet/GMC truck models and 1955 Chevrolet and GMC 1st series truck models. Fits a wide array of makes and models...

Bracket for the stabilizer bar bushing on various 1939-58 Buick and Oldsmobile models. Produced in stamped steel as original and painted to protect against the elements. Sold individually. Two required per vehicle. Buick...

This version of the classic Banjo Style steering wheel features stainless steel spoke and center hub construction. Each spoke features five highly polished stainless wires anchored to the wheel rim with a sculptured stainless...

Reproduction 4-button power window switch for a variety of 1948-54 GM models. Sold individually. Bezel is not included, but sold separately, under part # 4557610. Buick Applications 1949-53 All (with hydraulic power windows)...

Transmission tailshaft seal for 1939-50 Oldsmobiles with Hydramatic and all 1939-56 Oldsmobiles with manual transmissions.

OER® Reproduction of the original stamped steel headlamp retaining ring designed for use with various various 1941-74 GM car and truck models. Each headlight retaining ring is designed to hold the sealed beam into the...

Reproduction windshield wiper blade for 1954-55 1st Series Chevrolet and GMC trucks and 1949-54 Chevrolet Full-Size Passenger Car models and a wide array of other makes and models equipped with the wiper arm connector for...

Reproduction chrome bezel for the 1-button power window switch on a variety of 1948-54 GM models. Beautifully detailed die-cast part that is chrome-plated and highly polished to perfection. Buick Applications 1949-53 All...

Reproduction 1-button power window switch for a variety of 1948-54 GM models. Sold individually. Bezel is not included, but sold separately, under part # 4557793. Buick Applications 1949-53 All Oldsmobile Applications...

Switch retainer for 4-button power window switch on 1948-56 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-55 Chevrolet and Pontiac. Buick Applications 1948-56 all models Cadillac Applications 1948-53 all models ...

One pair of Quarter window vertical weatherstrips for a wide array og GM makes and models. These are the pieces which mount on the leading edge of the rear quarter window and seal the back of the door glass to the quarter...

Round door lock pillar bumper for many 1949-57 Oldsmobile, 1941-60 Buick, and 1953-58 Cadillac closed models that use a screw retained bumper. Sold individually, screw included.

Grant GT Rally steering wheels are patterned after the popular "Rally Car" look, with a solid 3-spoke design. The molded cushion grip is contoured to the shape of the hand with a leather grain finish for added comfort and...

Four button power window switch assembly for driver's door. Complete assembly including buttons and chrome bezel. Buick Applications 1949-53 All (with hydraulic power windows) Oldsmobile Applications 1948 Ninety Eight...

Set of individual "O L D S M O B I L E" letters used on the hood or trunk of all 1948 and 1949 models. Letters are 1-1/8" tall with 11/16" pin spacing. A GM licensed product with very nice detail and finish. Two sets used per car, fasteners included.

Reproduction chrome bezel for the 4-button power window switch on a variety of 1948-54 GM models. Beautifully detailed die-cast part that is chrome-plated and highly polished to perfection. Buick Applications 1949-53 All...

Reproduction of the original radiator cap designed for use with a wide array of 1949-64 General Motors applications as listed below. Each cap is manufactured to correct factory specifications resulting in an authentic and...

Reproduction lower window stop for various 1941-55 Chevrolet models. 1-5/16" square x 1/2" thick for 1955 convertible and hardtop. Replaces OE number 4609684. {fitment}

Reproduction of the original window crank handle designed for use with various 1954-58 Buick and Oldsmobile models. Each vent window crank measures 5 3/4 inches long and manufactured in die cast zinc featuring a chrome plated...

Switch reinforcement for 4-button power window switch on 1948-56 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-57 Chevrolet and Pontiac. Buick Applications 1948-56 all models Cadillac Applications 1948-53 all models ...

Reproduction door jamb switch for 1941-56 Chevrolet and various other GM models. Each switch is manufactured in the correct oval shape. Sold individually. Gasket and screws are not included. Chevrolet Applications: 1941-56...

Pinion shaft oil seal at differential for all 1948-52 Oldsmobile models. Oldsmobile Applications 1948-52 all models

The Grant GT Rally steering wheel is patterned after the popular "Rally Car" look, with a solid 3-spoke design. The molded cushion grip is contoured to the shape of the hand with a leather grain finish for added comfort and...

This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a...

Reproduction 1-button power window switch for a variety of 1948-54 GM models. Sold individually. Comes with beautifully detailed die-cast bezel that is chrome-plated and highly polished to perfection. Buick Applications...

Fuel caps have three important functions; safety of the vehicle’s occupants, fuel economy and reducing emissions. Replace that old, damaged or missing fuel cap or protect your vehicle from vandalism and theft with this new...

Rubber bumper for front lower control arm on 1939-56 Oldsmobile, and 1940-56 Buick models. Also used as a rear axle bumper on 1950-53 Cadillac models. Sold individually. Two required per vehicle Buick Applications 1940-56...

Button for power window and power seat switches on a wide variety of 1949-54 GM models including various Buick, Cadillac, Oldsmobile, and Packard models as listed. For models with power windows and/or seats. Sold...

This is the weatherstrip which mounts in the trunk gutter on the body. Usually six feet used per car, trimming may be necessary. Sold as a six-foot long section. Buick Applications 1949-51 Buick Special Oldsmobile...

Headlight rim seal attaches to the inner lip of the headlight bezel and seals around the headlight bulb. Sold individually. Buick Applications: 1940-54 all models Cadillac Applications: 1952-56 all models Oldsmobile...

Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...