1975 Mercury Monarch Parts

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components to stand up to even the most demanding automotive cooling systems. This is a standard cap that...

New, not rebuilt, York Tube-O-Ring air conditioning compressor for various Ford and Mercury models including Mustang, Falcon, Ranchero, and Comets. This compressor features a lightweight aluminum case and uses original style...

Replacement Duraspark II ignition modulator assembly for most 1975 Ford and Mercury models with electronic (breakerless) ignition. Applications include Mustang, Cougar, Bronco, and F-Series truck. Replaces Ford part# D5AZ-12A199-B.{fitment}

If you’re in the market to replace the worn out, damaged or leaking power steering pump choose this OER® Authorized brand new Ford power steering pump engineered to OE specifications.Upgraded to slipper style internals for quiet operation.Includes reservoirNo exchange required.Note:Pulley is not included.APPLICATIONS: 1970 Mustang, 302,351ci 1970 Ford Falcon 1975 Ford Granada 1971-75 Ford Maverick 1971-75 Mercury Comet 1970 Mercury Cougar 1971-75 1975 Mercury Monarch

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

Reproduction turn signal switch for various Ford models. The turn signal switch is located in the steering column. This switch activates and/or cancels your turn signals when the lever is depressed. See below for the various vehicles with the wiper switch mounted on the dash panel. Replaces OE part # D6OZ-13341-B. Ford Applications: 1975 Granada 1977-1979 LTD II 1974-1975 Mustang II 1975-1980 Pinto 1972-1979 Ranchero 1977-1979 Thunderbird 1972-1976 Fairlane 1972-1976 Torino Mercury Applications:1974-1979 Cougar 1975 Monarch 1972-1976 Montego

Reproduction of the original D6AZ-13341-B turn signal switch for various Ford, Lincoln, and Mercury models. The turn signal switch is located in the steering column. This switch activates and/or cancels your turn signals when...

Reproduction power steering pressure line hose assembly for various 1967-68 Ford and Mercury small-block V8 models including Mustang, Falcon, Ranchero, and Comet. This hose connects the high pressure side of the power...

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored to OEM appearance and function!Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new lookEach component is carefully inspected and replaced if not to OE tolerancesAll seals and O-rings are replaced with OE equivalent partsTested to insure OE performancePainted with high quality paintIncludes reservoirRemanufactured in the USANo exchange required.The core charge is built into the price, so it is not necessary to return the original core.Note: Pulley is not included.APPLICATIONS:1970 Mustang1970 Ford Falcon 1975 Ford Granada 1971-75 Ford Maverick1971-75 Mercury Comet 1970 Mercury Cougar1975 Mercury Monarch

This part is manufactured with all - new components and features closer tolerances than the original part. Our new valve is sold outright - no core required! Does not included the drag link. Works on 6 or 8 cyl. Mustangs....

The Ford FE engine is a Ford V8 engine used in vehicles sold in the North American market between 1958 and 1976 and in displacements between 330 cu in (5.4 L) and 428 cu in (7.0 L). These engines were designated as the...

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized brand new power steering pumps are engineered to OE specifications.Pumps are Upgraded to slipper style...

Painless Performance 21 circuit direct fit wiring harness for use on Ford and Mercury applications. This Ford color-coded harness features is a unique covered micro-fuse block with a 20 amp auxiliary relay circuit for...

High-quality replacement fuel pumps designed specifically for each year and engine size. Some fuel pumps may differ slightly in appearance from original but will fit and function correctly offering years of satisfactory...

Over the course of performance car history, and specifically muscle car history, big-block engines are particularly beloved, and for good reason. Not only are they the essence of what a muscle car is, but before modern...

Replacement power steering return hose assembly for various 1962-77 Ford and Mercury models including Mustang, Falcon, Comet, and Ranchero. A leak in your power steering system can lead to a very serious and possibly...

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

Master rebuild kit for 1965-86 Ford and Mercury 3.03 3-speed manual transmissions. The 3.03 tranny is found in various Ford and Mercury models including Mustang, Cougar, Falcon, and F-Series Truck. This kit includes all of...

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

All of Comp Cams’ High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Reproduction 157-Tooth automatic transmission flexplate ford various Ford and Mercury models including Mustang, Falcon, Fairlane, and Comet. The flexplate connects the engine to the transmission and allows for the expansion...

Replacement manual transmission fllywheel for various 1966-74 Ford and Mercury models including Mustang, Falcon, Comet, and Maverick. It is balanced to factory specs and will fit and function exactly like the original....

Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting.

Replace your standard "yellow light" headlamps with this unique looking diamond cut halogen headlamp for increased visibility, safety and a custom look. Features a bullet shapped center reflector. This headlamp installs much...

Replacement intake manifold gasket set for 1975-96 Ford and Mercury models with small-block V8 motors. Applications include Mustang, Cougar, Falcon, and Ranchero. They are specifically designed for Ford 351W factory high...

1966-83 Ford/Mercury 170/200 L6 Replacement Flywheel Ring Gear; 136 Tooth C6DE-6384-A C6DZ-6384-A{fitment}

Reproduction of the original style crankshaft damper (harmonic balancer) designed to replace the original on 1969 Mustangs with 351W engines. Your original crankshaft damper should be replaced whenever problems arise. After...

Give your classic a modern, custom look with this Oracle™ H4 sealed beam SMD (Surface Mount Diode) LED Halo headlamp that features a quality glass lens, a composite reflector housing and the Halo pre-installed. ...

The Edelbrock Part RPM Air-Gap 351W intake manifold is designed for street and high performance 351-427 c.i.d. 351W Ford V8 applications. The RPM Air-Gap incorporates the same race-winning design that’s been used on our...

Give your classic a modern, custom look with this Oracle™ H4 sealed beam SMD (Surface Mount Diode) LED Halo headlamp that features a quality glass lens, a composite reflector housing and the Halo pre-installed. ...

The Morimoto Sealed7 2.0 is all-new, all-original from the ground up. Until now, there were basically three distinct products on the market. You have the real-deal J.W. Speaker, at the top of the totem poll. Then you have the...

Replacement engine timing chain set for 1960-83 Ford and Mercury models including Mustang, Cougar, Falcon, and Ranchero. This 3-piece set includes a high alloy steel camshaft sprocket, crankshaft sprocket, and timing...

It's important that your timing chain is running correctly, otherwise you could risk damaging your Mustang's engine. This timing chain is a direct - fit replacement that came on your vehicle from the factory. {fitment}

These BBK premium quality header gasket sets are designed to give you a quality long lasting seal. Will work on most stock or aftermarket applications. Made in USA

All of Comp Cams’ High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Give your classic a modern, custom look with this Oracle™ H4 sealed beam SMD (Surface Mount Diode) LED Halo headlamp that features a quality glass lens, a composite reflector housing and the Halo pre-installed. ...

Replacement automatic transmission flexplate for various 1964-83 Ford and Mercury models including Mustang, Falcon, Comet, and Maverick. It is balanced to factory specs and will fit and function exactly like the original. ...

Add a new look to your classic car with these custom headlamps. Manufactured with a metal housing and glass lens to meet high quality standards. The 7" lamp features an inner one-piece chrome glare shield with black chrome...

Replacement starter solenoid relay switch for various 1972-79 Ford and Mercury models including Mustang, Cougar, Maverick, and Ranchero. Depending on the year, make, and model, this is a service replacement may differ in...

All of Comp Cams’ High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Replacement oil pump intermediate shaft assembly for numerous 1965-82 Ford and Mercury models including Mustang, Falcon, Comet, and Bronco. This 5/16" hex drive shaft assembly includes the retaining ring and is direct fit...

Give your classic a modern, custom look with this Oracle™ H4 sealed beam SMD (Surface Mount Diode) LED Halo headlamp that features a quality glass lens, a composite reflector housing and the Halo pre-installed. ...

Replacement engine oil pump pickup tube and screen for Ford and Mercury models with 351 Windsor motors including Mustang, Cougar, Torino, and Ranchero. The pick-up tube/oil screen assembly is an essential part of an engines...

This 7" glass headlamp with replaceable H4 bulb. These bulbs will replace conventional sealed beam H6014/H6024 bulbs with high/low beam function. Sold individually. For best results when upgrading to halogen-style...

Reproduction of the original unpainted oil pan for a wide variety of Ford, Lincoln, and Mercury models with 351 Windsor (W-Code) engines including 1969-73 Mustang with 351 Windsor. This reproduction mimics the original steel...

Replacement engine timing cover gasket set for various 1960-83 Ford and Mercury models including Mustang, Falcon, Comet, and Bronco. This gasket set contains all the gaskets and seals required to mount a timing chain cover to...

Stock replacement push rod for 1960-76 170, and 200 ci straight-6 engines with non-adjustable rockers. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing...

Edelbrock Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with an Edelbrock intake and stock iron cylinder heads on a 351W...

Replacement standard oil pump for various Ford and Mercury models with small block 351 Windsor motors including Mustang, Cougar, Ranchero, and F-Series truck. This pump features the standard volume and pressure for stock or...

Replacement oil pump intermediate shaft assembly for numerous 1969-97 Ford and Mercury models including Mustang, Cougar, Ranchero and F-Series truck. This 5/16" hex drive shaft assembly includes the retaining ring and is...

All of Comp Cams’ High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

MSD Ready-to-Run Ford distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Features maintenance-free magnetic pickup, sealed ball bearing and oversized shaft with QPQ-coating for friction reduction and corrosion resistance. Includes cap and race rotor with HEI style terminals.Features:Built-in Rev LimiterPowerful built-in module produces a 7.5 amp single spark through high rpmEasy-to-adjust mechanical advance with supplied springs and stop bushingsVacuum advance canister for improved economy (can be locked out)CNC machined billet aluminum housing and billet aluminum baseHousing is 5/8" smaller in diameter than stock Ford distributorsAdvance plate and weights are fine blanked from chrome moly steelAdvance weight pins are staked and tig welded to the plateNylon pads ensure smooth operation of the advance weightsDoes not require an MSD Ignition ControlCARB E.O. Approved

Headlamp bulb features a reinforced multi-surfaced aluminum reflector and rugged anti-vibration construction. Includes a Sylvania Halogen H4/HB2 12V 65/55W bulb. Replaces H6014/H6024 bulbs. SAE approved. Note: Headlamp...

All of Comp Cams’ High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

The Edelbrock RPM Air-Gap Dual-Quad 351W intake manifold is designed for 351W small-block Fords. This intake offers performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that...

Replacement engine oil pump pickup tube and screen for various 1964-77 Ford and Mercury models with 170-200 ci straight-6 engines. Applications include Mustang, Falcon, Comet, and Ranchero. The pick-up tube/oil screen...

On rare occasion, the three-pin low and high beam connection from the wire harness on classic cars is wired in an unconventional format. The pin-out for low, high, and ground may be different than what is considered industry...

Stock replacement push rod for 1962-78 Ford 351W small-block engines. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes. {fitment}

This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out.

Give your classic a modern, custom look with this Oracle™ H4 sealed beam SMD (Surface Mount Diode) LED Halo headlamp that features a quality glass lens, a composite reflector housing and the Halo pre-installed. ...