1983 Buick Regal Parts

Improve the ride and handling of your Regal with a new set of coil springs from Classic Industries®. Our replacement coil springs are precision engineered to restore ride height, handling and control. Conditions such as...

Reproductions of the original door lock knob ferrules for 1968-90 GM models. Unlike other replacement ferrules on the market that have a wider-than-factory ring, these authentic door lock knob ferrules feature the correct...

Un-cut replacement key for the indicated code listed for 1983 and 1987 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct...

This decal denoted the engine tuning specifications and instructions as well as emission information (when applicable). The decal is pressure sensitive and features a convenient "peel-n-stick" backing. Simply clean the area...

Un-cut replacement key for the indicated code listed for 1983 and 1987 models. Simply take this blank key and your original key to a locksmith and have them cut to fit your lock cylinder. Make sure to verify the correct...

Reproduction door window anti rattle set for 1982-87 G-Body models. Manufactured to correctly replace all wear and tear items that cause the window to rattle with age. One set does one window.

Reproduction front bumper guard for 2 door 1981-87 Regal models equipped with a painted bumper. Manufactured to factory specifications featuring correct cushion provision, and EDP coated ready to prep and paint. Guard cushion...

For all of the turbo Buick fans, we have a limited number of New Old Stock (NOS) 1983 Buick T-Type brochures. This brochure features every Buick T-Type offered in 1983. From the Century to the Regal, to even the Riviera. ...

Reproduction dash emblem for 1984-87 models. Manufactured to factory specifications featuring the original style chrome script with correct border color.

A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. Replace your...

Reproduction of the original tail lamp to housing retainer clip needed to hold the tail lamp together on various GM models including 1976-77,1982-90 Camaro and 1976-81 Firebird models. This clip holds the tail lamp lens cover...

Protect your carpet from all that foot traffic and improve the look of your interior with these cut pile 100% nylon carpet floor mats from ACC. Floor mats are die cut based on the year, make and model of each vehicle to...

We now have the correct color 1981-87 Buick Regal reproduction wheel well molding sets. While there are others on the market we have matched the exact color. You will see the rainbow color thru the molding just like a NOS...

Reproduction inner and outer wheelhouse assembly for 1981-87 Regal models. Manufactured to factory specifications, and EDP coated for rust prevention.

Reproduction bucket seat hinge covers for various 1983-87 G-Body models. Manufactured to factory specifications featuring the correct grain for a proper appearance. Available in factory colored material.

Direct replacement for your worn-out or non-working original alternator. This quality remanufactured alternator will install and function as original. Sold Outright - No Core Required Buick Regal applications: 1983 5.0L...

Reproduction fuel tanks for 1978-87 four door models equipped with a carburated engine. Manufactured to factory specifications, featuring original size, contours, filler neck, and come zinc coated for corrosion resistance.

Reproduction front bumper guard for all 1981-87 Regal models equipped with a painted bumper. Manufactured to factory specifications featuring correct cushion provision, and EDP coated ready to prep and paint. Guard cushion is...

OER® Authentic reproduction of the original radiator overflow jar cap unit designde for use on various GM models. This is a vented cap manufactured from injection molded ABS plastic that includes the seal and features the...

This tool is great for tucking headliner or upholstery material into tedious channels without damaging the material. Headliner installation is almost never easy, but having the right tools can make it much easier. This tool...

Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 2-1/2" overall, hole size is 3/8" on the end. Comes zinc plated...

Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 1-1/2" overall, hole size is 3/8" on the end. Comes zinc plated...

Universal fit clevis for many potential uses, including connecting a brake master cylinder or power brake booster push rod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is zinc...

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel...

OER® reproduction of the original inner door window crank handle for various 1967-81 GM models. The window crank handles feature a wider curved arm and longer shaft in order to clear the molded style deluxe door panels on...

Replacement sealed relay, five terminal SPDT used in many applications, headlight brightener, fuel pump wiring, cooling fans, etc. Good idea to carry a spare in your glove box. Note: Single Pole Double Throw (SPDT ).

Reproduction lower door panels for 1978-87 Regal models. Manufactured to factory specifications with correct arm rest, and door latch handle provisions. Available in a variety of colors.

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Make your wheels look like they just rolled out of the factory with this spray wheel coating. This eliminates the need for expensive custom paint mixing and greatly simplifies the restoration process by providing spray-gun...

Make your wheels look like they just rolled out of the factory with this spray wheel coating. This eliminates the need for expensive custom paint mixing and greatly simplifies the restoration process by providing spray-gun...

Reproduction arm rest pads for various 1978-87 G-Body models. Manufactured to factory specifications featuring the correct grain for a proper appearance. Available in various colors.

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

Economy OER® Authorized reproduction of the Rally wheel derby center hub cap without the words "Chevrolet Motor Division" or "Bow Tie" in the center. Each cap is manufactured in injection molded plastic, then chrome...

This 1.5 Street Performance shock is the latest in monotube shock technology, tuned by Hotchkis for a smooth ride and exceptional control. Features the latest cutting edge mono tube shock technology in a lightweight...

1982-87 Buick Regal marker lamp bezel. Made of die cast metal. Black. For 2 Door with T-15 Torx. Right Hand. Chrome.

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

Protective side molding was a factory or dealer option or an aftermarket molding that was installed to protect the side of the car from door dings. Found on many cars in the 60s and 70s, these finely crafted moldings are...

Reproduction of the original park brake cable retainer designed for various GM models as listed below. Manufactured in die stamped steel with clear zinc plating for corrosion resistance. Retainer attaches over the brake cable...

Reproduction steel hood for 1981-87 Buick models equipped with the turbo V6 engine. Manufactured to factory specifications featuring original style contours, and a full steel understructure. Note: Shipped truck fr eight.

Replacement door and trunk lock sets for 1981-87 models. Includes a pair of door cylinders, trunk lock, with bright finish, OE GM keys, cylinder retainers, and gaskets.

Reproduction tie-rod end for various GM models. Restores vehicle handling, and OE alignment. Reduces tire wear, and improves steering response. Each tie-rod end includes: (1) Tie Rod End, (1) Castle Nut, (1) Cotter Pin, (1)...

OER Authorized pitman arm to fit various 1978-88 GM A/G-Body models with 525 series Saginaw manual steering box or 500 or 605 power steering boxes. Drag link Tapered hole measures .550" major and .460 minor I.D.. Specs: 1"...

OER Authorized pitman arm to fit various 1978-87 Buick Regal and 1978-88 GM A/G-Body models with Delphi 600 series power steering boxes. Drag link Tapered hole measures .550" major and .460 minor I.D.. Specs: 1-1/8" -32...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

Reproduction of the original side marker gasket designed for use on 1978-2002 GM passenger car models. This foam gasket is placed on the mounting stud before side marker installation, sealing water out of the body. Fits front...

Make your wheels look like they just rolled out of the factory with this spray wheel coating. This eliminates the need for expensive custom paint mixing and greatly simplifies the restoration process by providing spray-gun...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

Reproduction wiper arm for various 1978-88 A-Body and G-Body models. Manufactured to factory specifications for a proper fit, and function, featuring an original style anodized silver finish. Buick Applications: 1978-87...

Reproduction of the original GM alloy wheel center cap for use on a variety of GM aluminum wheels including the Snowflake, Turbine, GTA and Hi-Tech wheels. Each center cap is manufactured to exact factory specifications for...

Reproduction of the original GM alloy wheel center cap for use on a variety of GM aluminum wheels including the Snowflake, Turbine, GTA and Hi-Tech wheels. Each center cap is manufactured to exact factory specifications for...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

OER® Original Hue paints are specially formulated to perfectly match the original color of specific parts installed at the factory. This paint is specifically formulated to match the finish of OEM Delco shock absorbers...

Make your wheels look like they just rolled out of the factory with this spray wheel coating. This eliminates the need for expensive custom paint mixing and greatly simplifies the restoration process by providing spray-gun...

Protective side molding was a factory or dealer option or an aftermarket molding that was installed to protect the side of the car from door dings. Found on many cars in the 60s and 70s, these finely crafted moldings are...

Don?t entrust the life of your engine to old hoses suffering from dry-rot and deterioration! Replace your old hoses with these quality molded hoses manufactured by Goodyear. Each hose features the correct bends for a factory...

Make your wheels look like they just rolled out of the factory with this spray wheel coating. This eliminates the need for expensive custom paint mixing and greatly simplifies the restoration process by providing spray-gun...