1983 Lincoln All Models Parts

Taylor Cable Street Thunder 8mm ignition wire set is a top choice for racers and enthusiasts for value and high performance features. Highly conductive stainless steel spiral wound core. Eliminate RFI/EMI which can...

The MSD 8.5mm Super Conductor is the ultimate performance wire. Engineered with incredibly low resistance without electronic interference. Made with copper alloy conductor resulting in less than 50 Ohms per foot of wire. This...

The MSD 8.5mm Super Conductor is the ultimate performance wire. Engineered with incredibly low resistance without electronic interference. Made with copper alloy conductor resulting in less than 50 Ohms per foot of wire. This...

These gradient density fuel pump strainers deliver reliable filtration and are the first line of defense against fuel system contaminants. Maximum filtering for increased fuel filter, fuel pump and fuel system life. {specs} ...

This B&M non-SFI standard replacement flexplate is ideal for street applications to extreme duty racing. Will work with both one and two piece rear main seals. 164 tooth, 11.4" bolt circle, 14.17" diameter, externally...

Alternator rectifier connector for various 1981-94 Ford and Mercury models including Mustang, Bronco, and F-Series trucks. This OEM style 3-wire pigtail will plug directly into any Ford 2G alternator. {fitment}

Replacement water temperature sending unit with 3/8"- 18 NPT thread. This brass sensor screws into intake manifold to activate the temperature warning light in the dash. This is a replacement part for various 1968-73 Ford...

The Edelbrock Performer Cylinder Head is for 1982-95 Ford 5.0L and 5.8L V8 applications. 50-state street legal and provide outstanding performance from Idle-5,500 RPM’s. Perfect for street performance, daily drivers, street...

These enhanced electric in-line pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance, and durability. All pumps meet or exceed OE specifications in fit, form, and function....

The Edelbrock Performer Cylinder Head is for 1982-95 Ford 5.0L & 5.8L V8 applications. 50-state street legal and provide outstanding performance from Idle-5,500 RPM’s. Perfect for street performance, daily drivers, street...

Replacement water temperature sending unit. This brass sensor screws into intake manifold to provide temperature to the gauge in the dash. This is a replacement part for various 1970-73 Ford models. However, you can use this...

These enhanced electric in-tank pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance, and durability. All pumps meet or exceed OE specifications in fit, form, and function....

This Edelbrock bolt kit contains a set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Made in USA Reduced...

Replace your damaged or missing power steering pump dipstick with this quality reproduction. Each cap features injection molded plastic construction with correct markings. {fitment}

DuraSpark ignition control module 4-pin connector for various 1975-83 Ford and Mercury models including Mustang, Bronco, and F-Series trucks. This OEM style 4-wire pigtail will plug directly onto the OE-style Duraspark...

DuraSpark ignition control module 2/3-pin connector for various 1975-83 Ford and Mercury models including Mustang, Bronco, and F-Series trucks. This OEM style 2-wire pigtail will plug directly onto the OE-style Duraspark...

Help prevent dirt and moisture from disturbing the brake compontnts on your 1974-78 Ford Mustang II. One set does both front wheels. {fitment}

Protect your valuable wheels and tires with these quality wheel locks. Each lock is able to withstand hammers, chisels, and wrenches. Narrow-groove key patterns and specially coded keys provide maximum security. No moving...

OER reproduction windshield glass for various 1980-89 Lincoln models. Replacing your original damaged or missing windshield glass will enhance your vehicle’s appearance and safety by allowing you to see clearly. Each...

The next step up from the Shift Improver Kit is the Transpak. It has all the features in the Shift Improver Kit, plus it provides additional driver manual control (C6 only). Most stock automatic transmissions won't downshift...

Centric OE replacement wheel seals retain lubricant, keep contaminants out, and protect wheel bearings from premature wear. Manufactured and inspected to factory standards for direct fit. Sold individually. Click Here For...

Wiring is often overlooked as being the cause of malfunctioning equipment. If your connector hhas gone bad, then this replacement plug may be the solution. Replace the corroded, cracked, broken or missing connector with this...

The Megashifter™ is one of B&M's all-time classic designs due to it's timeless good looks and high performance ratchet action. And, it's ideally suited for most popular universal applications. Key Features: Universal...

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

MSD DynaForce Starters for small and big block Mustangs and Fords. They feature a 3.4 horsepower motor and a 4.4:1 reduction gear set capable of handling up to 18:1 compression. The compact housing is fully clockable for...

This flexible braided stainless steel dipstick is the perfect addition to your Ford S/B. This part pushes into the timing cover. Fits: Ford 289-302-351W {fitment}

This ACCEL Super Stock wire set is a true performance upgrade to OE-type/replacement-type wires. Features: Silicone spark plug boots and zinc-plated steel spark plug terminals Benefits: Efficient transmitter of ign ition...

The Edelbrock Classic Series Valve Covers are designed for 1962-95 Ford 221 - 351W V8 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge...

Similar in performance characteristics to the HoleShot™ series, the Tork Master™ is B&M's lowest cost performance torque converter. The Tork Master™ is an excellent all-around performance street converter...

This ACCEL Super Stock wire set is a true performance upgrade to OE-type/replacement-type wires. Features: Silicone spark plug boots and zinc-plated steel spark plug terminals Benefits: Efficient transmitter of ign ition...

MSD Ready-to-Run Ford distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect...

Our remanufactured power steering pump is thoroughly remanufactured, carefully inspected and restored to OEM appearance and function! Specifications: Pumps are thoroughly cleaned and exterior surfaces reconditioned for...

Centric wheel bearings are a direct fit replacement for your vehicle. These non-directional bearings can be used on either the driver or passenger side. Features include premium design, manufactured with high quality...

Edelbrock Signature Series chrome valve covers are engineered for function and styled for good looks for Ford small block engines (except Boss). They features stock-style breather baffles that prevent oil passage to the PCV...

Performer-Link timing chain sets have solid bushing chain for true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprocket...

Similar in performance characteristics to the HoleShot™ series, the Tork Master™ is B&M's lowest cost performance torque converter. The Tork Master™ is an excellent all-around performance street converter...

Chrome, steel. {fitment}

This electric engine water pump fits Small Block Ford engines and is made from high-quality die cast aluminum. Features a great looking blue powder coat finish. Unit has a flow rate of 35 GPM and only draws 6 amps. It...

Replacement style windshield washer pump replaces the stock washer pump on a wide variety of 1969-97 Ford, Lincoln, and Mercury models. Each washer pump is designed to install and operate as original but may differ slightly...

Replacement ballast resistor wire for numerous 1956-91 Ford and Mercury models including Mustang, Cougar, Falcon, and Ranchero. The standard series is designed to meet OE design specifications. The premium series has...

The B&M Shift Improver Kit is the easiest way to get the stout performance you've always wanted out of your automatic transmission and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It's our...

Accel's patented race proven spark plugs are now available in a shorty configuration. The overall length of each plug has been reduced 1/4" in to 3/8" in (depending on the specific spark plug) to gain critical air gap space...

All new replacement cast iron water pump for various 1980-85 Ford Mustang and Mercury Capri models with 302/5.0L V8 engines. This pump features all new, original equipment-quality components for proper fit and a long service...

This idler arm bushing is a direct replacement for OEM idler arms in the applications listed below. Size of bushing is 1 - 3/8" O.D. Replaces OE #'s C5AZ-3358A, D5DZ-3358A or aftermarket #'s K8103, 12253, 45G12009, 12183. ...

This drum brake self-adjuster hardware set includes the necessary pieces to repair/service 1 Right hand (passenger side) drum. Will fit front or rear with 11" brakes. Applications: 1966-69 Charger 1969 Dayton a 1965-69...

Rid your engine of internal friction with roller-tipped rocker arms. The race-proven full needle bearing, fulcrum and roller tip not only unleash horsepower, they also lengthen valve train component life and reduce wear and...

A quality replacement front wheel grease seal. These seals should always be replaced when servicing your wheel bearings. Dodge Applications: 1973-1974 Challenger 1973-1976 Dart Edsel Applications: 1958-1958 Bermuda...

Replacement starter solenoid relay switch for various 1978-96 Ford and Mercury models including Mustang, Cougar, Maverick, and Ranchero. Depending on the year, make, and model, this is a service replacement may differ in...

This ACCEL Super Stock Spiral wire set is a true performance upgrade with increased ignition energy due to lower resistance and is an oversized upgrade where OE is 7mm. Features: Fiberglass and Kevlar® stranded inner...

The Edelbrock Classic Series Valve Covers are designed for 1962-95 Ford 221 - 351W V8 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge...

B&M shifter cable bracket for Ford AOD transmission. Includes bracket and spacers.

The K&N Performance Gold® Oil Filter has been constructed from the ground up to satisfy the vehicle owner who wants the very best oil filter available. The heavy duty construction provides up to 550 PSI hydrostatic...

Manufactured and inspected to OEM-level standards, Centric’s OE replacement axle shaft bearings are guaranteed to enable smooth, easy wheel rotation with their optimally configured friction and load handling. Sold...

This is a replacement socket assembly used with all 1959-2001 side marker lamps. For use with bulb 158, 194, or 194A (not included). This socket assembly can be used for all side marker assemblies, front or rear. {fitment}

MSD DynaForce Starters for small and big block Mustangs and Fords. They feature a 3.4 horsepower motor and a 4.4:1 reduction gear set capable of handling up to 18:1 compression. The compact housing is fully clockable for...

These Edelbrock Elite II Valve Covers are designed for Ford 289/302/351W (except Boss) applications. This new line of Elite II valve covers feature a design that is influenced by the original Elite Series originally released...

Reproduction of the original control arm bushing designed for use on the the upper control arm for various 1961-1994 GM and Ford models. Manufactured in steel clad rubber that replicates the original control arm bushing in...

The B&M QuickSilver™ shifter is a top of the line ratchet action shifter that provides you with performance shifting without a trigger. To get into park or reverse from drive, just lift the knob/stick assembly and move...