Product#: F15937

Flowmaster; Universal; 3" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: F15935

Flowmaster; Universal; 2-1/4" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: F15936

Flowmaster; Universal; 2-1/2" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...

Product#: F43083

Flowmaster; 15" Transverse Cross Flow 80 Series Muffler; With 3" Offset Inlet; 2-1/2" Dual Outlet

The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rear end. This muffler provides an aggressive muscle car sound both inside and outside the vehicle. A...

Product#: F17104

Flowmaster; American Thunder; 1967-74 Camaro/Firebird,1968-74 Nova; V8; 2.5" Crossmember-Back Dual Exhaust System

For the person who is looking for a complete Header-back dual exhaust system with a moderate tone, this system is mandrel bent for maximum performance, includes a specially selected muffler and is designed with easy fit in...

Product#: F42541

Flowmaster; 13" Original 40 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Center Outlet

This is the most "aggressive" sounding street/strip muffler that Flowmaster® offers. If you're looking for attention, this one will get you noticed. The original standard 40 series has an "aggressive rumble" and will...

Product#: F15362

Flowmaster; Stainless Weld-On 3" X 13" Exhaust Tip; For 2-1/2" Pipe; With Angled Edge And Logo

Exhaust tip with straight-edge, angle-cut end. This weld-on tip is finished with an embossed Flowmaster logo. Made in USA Sold individually.

Product#: 817938

1967-72 Ford F100/250; 2WD V8; Flowmaster American Thunder Crossmember-Back 2.5" Dual Exhaust System; 409 Stainless Steel

This American Thunder exhaust system is specifically designed for 1967-1972 Ford F-100/F-250/F-350 2-wheel drive V8 trucks without a side mounted auxiliary fuel tank. The system is perfect for the person looking for an...

Product#: F952548

Flowmaster; Super 40 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Opposite Offset Outlet

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Product#: F42582

Flowmaster; 18" Transverse Cross Flow 80 Series Muffler; With 2-1/2" Dual Inlet; 2-1/2" Dual Outlet

The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rear end. This muffler provides an aggressive muscle car sound both inside and outside the vehicle. A...

Product#: F17149

Flowmaster; American Thunder; 1970-74 Camaro/Firebird; V8; 2.5" Crossmember-Back Dual Exhaust System; Rear Exit

For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, this system is mandrel bent for maximum performance and include specially selected mufflers. This...

Product#: F53056

Flowmaster; Super 50 Series Muffler; With 3" Offset Inlet; 3" Center Outlet

The Super 50 series muffler is a larger version of Flowmaster's 50 series Delta Flow muffler. Originally designed for trucks and SUV's, it is also well suited to muscle car and high performance applications. The larger case...

Product#: F952546

Flowmaster; Super 40 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Center Outlet

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Product#: F943047

Flowmaster; Super 44 Series Muffler; With 3" Center Inlet; 3" Offset Outlet

The Super 44 offers maximum performance, an improved flow path radius, generates more torque / power than ever before and is the most aggressive, deepest toned street and strip muffler Flowmaster has ever made! If you really...

Product#: F842541

Flowmaster; Black Delta Flow 40 Series Muffler; with 2-1/2" Offset Inlet; 2-1/2" Center Outlet

This two chamber design incorporates Flowmasters patented "Delta Flow" technology. The "Delta" deflectors result in increased scavenging for better performance and reduced interior resonance over the standard 40 series with a...

Product#: F12418409

Flowmaster; 18" Super HP-2 Muffler; With 409S Stainless Steel Case; 2-1/4" Inlet; 2-1/4" Outlet

Flowmaster® has taken the laminar core of our classic HP-2 muffler and wrapped it in a new compact square case. The new Super HP-2 Series muffler offers the same great performance benefits and moderate tone that you would...

Product#: F15925

Flowmaster; 3" Collector To 2.5" System; Header Collector Ball Flange Set

This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. Made in USA Emission Note: 50- State Legal This part is legal for...

Product#: F842551

Flowmaster; Delta Flow 50 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Center Outlet

This is the latest three chamber design of the 50 series muffler that utilizes Flowmasters patented "Delta Flow" technology along with an internal tuning chamber to eliminate most all interior resonance and still have that...

Product#: 817934

1967-72 Ford F100/250; 2WD Long Bed V8; Flowmaster American Thunder Crossmember-Back 2.5" Dual Exhaust System; 409 Stainless Steel

This American Thunder exhaust system is specifically designed for 1967-1972 Ford F-100/F-250/F-350 2-wheel drive V8 trucks without a side mounted auxiliary fuel tank. The system is perfect for the person looking for an...

Product#: F53055

Flowmaster; Super 50 Series Muffler; With 3" Center Inlet; 3" Center Outlet

Features: 16 Gauge Aluminized Steel Fully MIG Welded for Maximum Durability Three Chamber Delta Flow Technology Mild to Stock Exterior Exhaust Tone Minimal Interior Resonance Excellent Choice for Large Displacement Vehicles...

Product#: F843041

Flowmaster; Delta Flow 40 Series Muffler; With 3" Offset Inlet; 3" Center Outlet

This two chamber design incorporates Flowmasters patented "Delta Flow" technology. The "Delta" deflectors result in increased scavenging for better performance and reduced interior resonance over the standard 40 series with a...

Product#: F17413

Flowmaster; 1959-64 Chevrolet Impala/Bel Air/Biscayne; V8; 2.5" Crossmember-Back Dual Exhaust System

Flowmaster performance 2-1/2" mid-pipe set for 1959-64 Impala and full size Chevrolet models. This pre-bent pipe kit is made with 16 gauge 409 stainless steel mandrel bent tubing and are designed to fit your vehicle perfectly...

Product#: F15920

Flowmaster; Universal; 2-1/2" Balance Pipe Set

Flowmaster offers a pre-fabricated universal balance pipe set to ease the installation of a crossover pipe in a dual-exhaust system. Made in USA Set includes T-pipe connectors, balance pipe and clamps. Emission Note: 50-...

Product#: F17139

Flowmaster; American Thunder; 1969 Camaro/Firebird; Coupe; V8; 2.5" Crossmember-Back Dual Exhaust System

For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, this system is mandrel bent for maximum performance and include specially selected mufflers. This...

Product#: FM814211

Flowmaster; Scavenger Elite Series; 1964-73 Ford Mustang; 289-302 SB; 4-1 Long-Tube Headers

Flowmaster's Scavenger Series Elite long tube headers are designed to replace the factory cast iron manifolds. These high quality headers are manufactured from stainless steel and are ceramic coated for maximum durability....

Product#: F42442

Flowmaster; Original 40 Series Muffler; With 2-1/4" Center Inlet; 2-1/4" Offset Outlet

This is the most aggressive sounding street/strip muffler that Flowmaster offers. If you're looking for attention, this one will get you noticed. The standard 40 series has an "aggressive rumble" and will generally resonate...

Product#: F842543

Flowmaster; Black Delta Flow 40 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Offset Outlet

This two chamber design incorporates Flowmasters patented "Delta Flow" technology. The "Delta" deflectors result in increased scavenging for better performance and reduced interior resonance over the standard 40 series with a...

Product#: F15361

Flowmaster; Stainless 3" X 12" Exhaust Tip; For 2-1/2" Pipe; With Rolled Edge And Logo

This is a stainless exhaust tip designed with a double wall, rolled edge offering 3" diameter exit. Designed to fit 2-1/2" pipe, and is 12" in length. Made in USA Clamp-on style finished with an embossed Flowmaster logo. Sold...

Product#: F952549

Flowmaster; Super 40 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Same Side Offset Outlet

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Product#: F953048

Flowmaster; Super 40 Series Muffler; With 3" Offset Inlet; 3" Opposite Offset Outlet

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Product#: F1055

1959-64 Impala/Biscayne/Bel Air; V8; Flowmaster; Side Exit 2.5" Tail Pipe Set

Flowmaster performance 2-1/2" tail pipe set for 1959-64 Impala and full size Chevrolet models. This pre-bent pipe kit is made with 16 gauge 409 stainless steel mandrel bent tubing and are designed to fit your vehicle...

Product#: F53057

Flowmaster; Super 50 Series Muffler; With 3" Center Inlet; 3" Offset Outlet

The Super 50 series muffler is a larger version of Flowmaster's 50 series Delta Flow muffler. Originally designed for trucks and SUV's, it is also well suited to muscle car and high performance applications. The larger case...

Product#: F9530462

Flowmaster; Super 40 Series Muffler; With 3" Offset Inlet; 2-1/2" Dual-Outlet

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Product#: 16562HKR

1965-74 Ford F100/250; 2WD; 352-390 V8; Hooker Header Back Exhaust System

This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for...

Product#: FM15816

1955-57 Chevrolet Bel Air, 150, 210; 2.5" Tailpipes; Aluminized Steel; 2 Door & 4 Door Sedan & Hardtop; Except Wagon

These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear...

Product#: F17129

Flowmaster; American Thunder; 1967-68 Camaro/Firebird; V8; 2.5" Crossmember-Back Dual Exhaust System

For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, this system is mandrel bent for maximum performance and include specially selected mufflers. This...

Product#: F52571

Flowmaster; 70 Series Muffler; 22" Length; With 2-1/2" Offset Inlet; 2-1/2" Center Outlet

The 70 Series muffler utilizes Flowmaster's patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV's, tow vehicles and high...

Product#: 16561HKR

1977-79 Ford F100/250; 4WD; 351-400M V8; Hooker Header Back Exhaust System

This system uses 2.25-inch 16-gauge aluminized tubing to reduce back-pressure and improve engine efficiency. The system is mandrel bent to eliminate any crush sections in the tubing to help maximize the exhaust flow for...

Product#: F15822

Flowmaster; 1967-69 Camaro/Firebird; 3" Tailpipe Set

Flowmaster's 3" mandrel-bent tailpipe set covers 1967-69 models. This tailpipe set is designed so you can create a mandrel-bent custom high performance exhaust for any models including convertibles. Flowmaster designed these...

Product#: F42543

Flowmaster; 13" Original 40 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Offset Outlet

This is the most "aggressive" sounding street/strip muffler that Flowmaster® offers. If you're looking for attention, this one will get you noticed. The original standard 40 series has an "aggressive rumble" and will...

Product#: F17233

Flowmaster; American Thunder; 1986-91 Camaro/Firebird; 5.0L/5.7L V8; 3" Cat-Back Dual Exhaust System

For the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster® Cat-back exhaust system provides this dual out rear system is the perfect choice. The American Thunder®...

Product#: F15364

Flowmaster; Stainless 3-1/2" X 7-1/2" Exhaust Tip; For 2-1/4" Pipe; With Rolled Edge And Logo

This is a stainless exhaust tip designed with a double wall, rolled edge offering 3-1/2" diameter exit. Designed to fit 2-1/4" pipe, and is 7-1/2" in length. Ma de in USA Clamp-on style finished with an embossed Flowmaster...

Product#: F15923

Flowmaster; 3.5" Collector To 3" System; Header Collector Ball Flange Set

This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. Made in USA Emission Note: 50- State Legal This part is legal for...

Product#: F952545

Flowmaster; Super 40 Series Muffler; With 2-1/2" Center Inlet; 2-1/2" Center Outlet

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Product#: F17201

Flowmaster; American Thunder; 1967-69 Camaro/Firebird; Coupe; V8; 3" Crossmember-Back Dual Exhaust System

For the person who is looking for a complete Header-back dual exhaust system with an aggressive tone. With easy fit in mind, this system is mandrel bent for maximum performance and include specially selected mufflers. This...

Product#: FM15807

1965-67 Ford Mustang/1967-73 Mercury Cougar; W/O Staggered Shocks; 2.5" Tailpipes; Aluminized Steel

Flowmaster's 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster. Features: Premium Quality Gray Color Exits at Rear of...

Product#: F42583

Flowmaster; 15" Transverse Cross Flow 80 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Dual Outlet

The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rear end. This muffler provides an aggressive muscle car sound both inside and outside the vehicle. A...

Product#: F842553

Flowmaster; Delta Flow 50 Series Muffler; With 2-1/2" Offset Inlet; 2-1/2" Opposite Offset Outlet

This is the latest three chamber design of the 50 series muffler that utilizes Flowmasters patented "Delta Flow" technology along with an internal tuning chamber to eliminate most all interior resonance and still have that...

Product#: F842515

Flowmaster; Black Super 10 Series Muffler; With 2.5" Center Inlet; 2.5" Center Outlet

Looking for the most aggressive sound available? Flowmaster's new Super 10 series muffler is so aggressive, it's not recommended for street driven vehicles. Best suited to racing applications, this features the same Delta...

Product#: F842518

Flowmaster; Black Super 10 Series Muffler; With 2.5" Offset Inlet; 2.5" Offset Outlet

Looking for the most aggressive sound available? Flowmaster's new Super 10 series muffler is so aggressive, it's not recommended for street driven vehicles. Best suited to racing applications, this features the same Delta...

Product#: F15811

Flowmaster; 1988-98 GM C/K 1500 1/2-Ton Truck; Dual Aluminized Tailpipes; With Side Exit

Flowmaster introduces their dual 2.50" "pre-bend" tailpipes for 1988-1998 GM C/K1500 pickup trucks. These are universal type parts that are constructed in aluminized steel and do not include any hangers, mounts, tips, etc....

Product#: FM17119

Flowmaster American Thunder; 1964-72 Chevelle, GTO, 442; 2.5" Aluminized Steel Crossmember-Back Exhaust System; Super 40 Series Mufflers

This American Thunder Crossmember-Back exhaust system is custom designed for most 1964-1972 GM A-body cars and is for the person looking for a complete 2.50-inch dual exhaust system with a moderately aggressive exterior tone...

Product#: F42441

Flowmaster; 13" Original 40 Series Muffler; With 2-1/4" Offset Inlet; 2-1/4" Center Outlet

This is the most aggressive sounding street/strip muffler that Flowmaster® offers. If you're looking for attention, this one will get you noticed. The original standard 40 series has an "aggressive rumble" and will...

Product#: F8430452

Flowmaster; Super 44 Series Stainless Steel Muffler; With 3" Center Inlet; 2.5" Dual Outlets

Flowmaster's Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever...

Product#: F17199

Flowmaster; American Thunder; 1998-02 Camaro/Firebird; 5.7L LT1 V8; 3" Cat-Back Dual Exhaust System; 2.5" In-Out

For the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster® Cat-back exhaust system provides this dual out rear system is the perfect choice. The American Thunder®...

Product#: F17234

Flowmaster; American Thunder; 1986-91 Camaro/Firebird; 5.0L/5.7L V8; 2.5"" Cat-Back Dual Exhaust System

Flowmaster's 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster®. The American Thunder® system delivers a...

Product#: F842451

Flowmaster; Delta Flow 50 Series Muffler; With 2-1/4" Offset Inlet; 2-1/4" Center Outlet

This is the latest three chamber design of the 50 series muffler that utilizes Flowmasters patented "Delta Flow" technology along with an internal tuning chamber to eliminate most all interior resonance and still have that...

Product#: F843051

Flowmaster; Delta Flow 50 Series Muffler; With 3" Offset Inlet; 3" Center Outlet

This is the latest three chamber design of the 50 series muffler that utilizes Flowmasters patented "Delta Flow" technology along with an internal tuning chamber to eliminate most all interior resonance and still have that...

Product#: F953046

Flowmaster; Super 40 Series Muffler; With 3" Offset Inlet; 3" Center Outlet

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Product#: F12012409

Flowmaster; 12" Super HP-2 Muffler; With 409S Stainless Steel Case; 2" Inlet; 2" Outlet

Flowmaster® has taken the laminar core of our classic HP-2 muffler and wrapped it in a new compact square case. The new Super HP-2 Series muffler offers the same great performance benefits and moderate tone that you would...