Product#: K0121

1967-69 Camaro Z28; Power Brake Intake Manifold Vacuum Fitting

Reproduction of the original power brake vacuum fitting designed for use with 1967-69 Camaro Z28, and 1964-66 Chevelle 4/speed models. Each fitting is manufactured to correct factory specifications. This fitting is for use...

Product#: K0124

1968-69 Camaro RS; 1964-66 Chevelle A/T; Intake Manifold Vacuum Fitting

Reproduction of the original intake vacuum fitting designed for use with various models including 1967-69 Camaro Rally Sport models, and 1964-66 Chevelle models with auto trans. Each fitting is manufactured to factory...

Product#: K0058

1962-72 PCV Valve Hose with Clamps

Reproduction PCV valve hose for various 1962-72 GM models. Each hose is cut to match the OE length. Includes quality thick walled hose with 90° bend as original. Also includes 2 replacement style clamps to insure proper...

Product#: F12358

1968-74 Firebird, Trans Am; Aluminum Rear Carburetor Fitting; with Angled Fitting

Reproduction of the original carburetor rear fitting designed specifically for use with 1968-74 Pontiac Firebird and Trans Am models with 326, 350, 400, and 455 motors with or without Ram Air. This fitting screws to the back...

Product#: F12371

1968-75 Firebird, Trans Am; Carburetor Rear Fitting; with Straight Fitting

Reproduction of the original aluminum carburetor fitting designed for use with 1968-75 Pontiac models including Firebird and Trans Am. This particular fitting was used on most all 1968-69 Firebird models, but can also be used...

Product#: K0083

1965-05 Chevrolet/GMC; Valve Cover Grommets; Big Block; Car and Truck Models

Reproduction valve cover grommets for Chevrolet 6 cylinder valve covers and 1965-72 Chevrolet big block valve covers. Included is the 3/4" i.d. x 1-1/4" o.d. PCV valve grommet and a 7/8" i.d. x 1-1/4" o.d. valve cover to air...

Product#: F12372

1972-74 Firebird, Trans Am; Aluminum Carburetor Fitting; with 2 Angled Fittings

Reproduction of the original aluminum carburetor fitting designed for use with 1968-75 Pontiac models including Firebird and Trans Am. Each fitting features the correct GM part number # 487331 stamped on the part for...

Product#: 3989349

1969-82 Chevrolet; Valve Cover PCV Grommet; Small Block; with High Performance; LH Grommet

Reproduction of the original valve cover grommet designed for use with various 1969-92 GM small block valve covers. Each grommet is precision-molded in quality EPDM rubber and replicates the original factory configuration for...

Product#: GN110807

1986-87 Buick Regal - Bypass Hose

Replacement 3 layer silicone bypass hoses for 1986-87 models. One hose fits from the front of the intake manifold to the back portion of the water pump. The other hose fits from the heater coolant pipe to the water pump...

Product#: K0123

1967-70 Camaro, Impala, Nova; Intake Manifold Vacuum Fitting; 327/350hp, Big Block; AT; with AC

Reproduction of the original style air conditioning manifold vacuum fitting for use with various 1967-70 Camaro, Impala, Nova, Chevy/GMC trucks, with 327/350hp, auto trans, and AC, and 1970 Chevelle Cowl Induction models with...

Product#: K0167

1967-70 Chevrolet; Intake Manifold Vacuum Fitting; 327/350hp, Big Block; w/Auto Trans

Reproduction of the original intake manifold fitting designed for use with various 1967-70 Chevrolet 327/350hp small block, and 396, 427 big block models with automatic transmissions. Replaces the original fitting exactly.

Product#: TA4067

1967-81 Pontiac Firebird; Vacuum Check Valve; Fits Vacuum Tree On Intake

Reproduction vacuum check valve for 1967-81 Firebird and Trans Am models equipped with AC. Check valve mounts on the vacuum tree on the intake manifold.

Product#: BR1001S

1968-71 Buick Skylark; Power Brake Booster; Brass Vacuum Fitting

Replaccement brass vacuum fitting for the power brake booster on 1968-72 Buick Skylark 350ci, 400ci and 455. This fitting screws in the intake manifold to supply to the vacuum brake booster.

Product#: 1253524

1967 Pontiac Firebird; Intake Manifold Vacuum Fitting; Intake To Air Cleaner

Intake manifold to air cleaner vacuum fitting. This fitting mounts on the front of the manifold and allows the air cleaner vacuum pod to open under vacuum to allow warm air into the air cleaner to warm up the engine faster...

Product#: K0122

1967-70 Chevrolet; Power Brake Vacuum Fitting; 327/350hp, 396, 427 4 bbl. 4/Speed

Reproduction of the original power brake vacuum fitting designed for use with various 1967-70 Chevrolet models with powet brackes, 327/350hp, 396, 427, 4/speed models. Each fitting is manufactured to correct factory...

Product#: MP700103

1968-69 Charger Ex Hemi (W/O ac) - Power Brake Vacuum Hose Fitting

Excellent reproductions of the vacuum fittings found on the intake manifold for power brake applications with 1/8" and 1/4" auxiliary connections. Machined with the correct tall hex base with 3/8" NPT threads, formed and...

Product#: F1444

1968-74 Firebird, Trans-Am; Intake Vacuum Fitting

Reproduction of the original intake vacuum fitting for use with various 1968-74 Pontiac models including Firebird and Trans Am. This vacuum fitting mounts on the intake manifold on runner # 1. This will provide a strong...

Product#: PCV52

1967-73 8 Cylinder Reproduction PCV Valve

A PCV valve is a vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed. This valve acts as a system...

Product#: FDV6906

69 Distributor Vacuum Line OEM

Reproduction distributor vacuum lines for use with 1969 6 cylinder models with overhead cam.

Product#: K0054

1967-69 Camaro Z28; Vacuum Advance Line Kit; Small Block

Reproduction of the original vacuum advance line and components designed for use with 1967-69 Camaro Z28 (302) models. Includes the advance vacuum metal tube, retainer clip on intake, and white stripe hose.

Product#: MP700102

1960-76 Mopar A/B/E-Bodies (Ex 68-69 Charger) W/ AC Or Air Grabber - Power Brake Vacuum Hose Fitting

Excellent reproductions of the vacuum fittings found on the intake manifold for power brake applications with 1/8" and 1/4" auxiliary connections. Machined with the correct tall hex base with 3/8" NPT threads, formed and...

Product#: DVT400

59-64 Distributor Vacuum Line 327/250Hp OE Material

Distributor Vacuum Lines: Correct replacement for missing or damaged metal vacuum line. Includes line and clip for installation.

Product#: FAC6801

1969-74 Firebird, Trans Am, GTO, LeMans, Tempest; Air Cleaner Vent Tube; without Ram Air; Fits 1967-68 with Ram Air

Reproduction of the original vent tube designed for use with 1967-68 Pontiac Firebird, GTO, LeMans, Tempest models with Ram Air, and 1969-74 models without Ram Air. Each tube is manufactured to correct factory specifications...

Product#: 1253508

1970-78 Pontiac Trans-Am; Engine Vacuum Check Valve

Replacement vacuum fitting which fits dimensions of 3/8 - 18 thread with a single hose fitting.

Product#: FDV6605

1966-69 Big Block 4 Bbl Holley OEM Material Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: PCV17

1963-67 283, 327 Screw In Style PCV Valve

A PCV valve is a vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed. This valve acts as a system...

Product#: 1253519

1968-72 Pontiac; Intake Manifold Fitting For PCV Vent

Pontiac intake manifold fitting for PCV vent on intake. This brass fitting is required to vent the intake on all 1968-72 Pontiac V8 engines.

Product#: K099091

1964-70 Impala, Caprice, Camaro, Nova; Vacuum Booster Pipe; Small Block 283, 307, 327, 350

Reproduction of the original vacuum booster pipe designed for use with 1967-69 Camaro, Impala, Caprice, Nova, Chevelle, El Camino, and Malibu models with small block engines. Replaces original GM part numbers # 3909909,...

Product#: GN111068

1986-87 Buick Regal; Grand National; Billet Aluminum Vacuum Block; Grooved Finish

Our vacuum blocks for 1986-1987 Buick Grand Nationals are produced with pride in the USA. They are available in a Smooth or a Grooved finish to match the upper factory plenum. The billet replacement vacuum block comes as...

Product#: DVL201

67-69 Distributor Vacuum Line 4 Bbl Small Block OE Material

This distributor vacuum line is for the Camaro with a small block V8 and a four-barrel carburetor, excluding the 302 ci V8. The steel line has the appropriate sized fitting on both sides. The vacuum line weighs one ounce and...

Product#: FDV6910

69 Firebird 400 With 4 Barrel Carb Distributor Vacuum Line -OEM

Product#: XDV6601

1966 283 2bbl OEM Material Distributor Vacuum Line

Correct reproductions of the original distributor vacuum line in OEM material.

Product#: PCV76

1974-89 8 Cylinder Reproduction PCV Valve

A PCV valve is a vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed. This valve acts as a system...

Product#: FDV6707

1967-72 Small Block 2bbl OEM Material Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: K0054A

1967-69 Camaro, Impala, Nova, Truck; Vacuum Advance Line Kit; with 4 bbl Quadrajet

Reproduction of the original vacuum advance line and components designed for use with 1967-69 Camaro, Impala, Nova models with 327, 350 and Quadrajet 4 bbl. carb. Includes the advance vacuum metal tube, retainer clip on...

Product#: TDV5801

58-59 Distributor Vacuum Line OE Material

Product#: BDV7005

1970 Impala / Full Size Big Block With Quadrajet OEM Material Distributor Vacuum Line

Correct reproductions of the original distributor vacuum line in OEM material.

Product#: 92L014

1986-93 Ford Mustang; V8; Vacuum Distribution Tree

Reproduction of the original vacuum distribution tree designed for use on 1986-93 Mustang 5.0L models. Manufactured to factory specifications featuring correct mounting holes, and original style labeled vacuum port locations....

Product#: FDV6906S

69 Distributor Vacuum Line Stainless Steel

Reproduction distributor vacuum lines for use with 1969 6 cylinder models with overhead cam.

Product#: FDV6701S

1967-69 6 Cylinder Stainless Steel Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: FDV6701

1967-69 6 Cylinder OEM Material Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: FDV6705

1967-69 Camaro, Chevy II, Nova; Distributor Vacuum Line; Big Block; 4 Bbl Quadrajet; Steel

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: FDV6710

67 Firebird 400 Distributor Vacuum Line -OEM

Product#: GN110740

1986-87 Buick Regal Turbo; Vacuum Block Gasket

Reproduction vacuum block gasket that goes between the vacuum block and the throttle body on 1986-87 turbo models.

Product#: PCV20

1964-79 6 / 8 Cylinder PCV Valve

A PCV valve is a vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed. This valve acts as a system...

Product#: GN111082

1984-85 Buick regal; Grand National; T-Type; Billet Aluminum Vacuum Block; Grooved Finish

Our vacuum blocks for 1986-1987 Buick Grand Nationals are produced with pride in the USA. They are available in a Smooth or a Grooved finish to match the upper factory plenum. The billet replacement vacuum block comes as...

Product#: MP700105

1968-69 Charger W/ AC - Power Brake VACuum Hose Fitting

Excellent reproductions of the vacuum fittings found on the intake manifold for power brake applications with 1/8" and 1/4" auxiliary connections. Machined with the correct tall hex base with 3/8" NPT threads, formed and...

Product#: DVL200

67-69 Distributor Vacuum Line 6 Cyl OE Material

This steel distributor vacuum line is for the Camaro with a six-cylinder engine. The steel line has the appropriate sized fitting on both sides. The vacuum line weighs two ounces and ships via UPS. Applications: 1967-1969...

Product#: GN111066

1986-87 Buick Regal; Grand National; Billet Aluminum Vacuum Block; Smooth Finish

Our vacuum blocks for 1986-1987 Buick Grand Nationals are produced with pride in the USA. They are available in a Smooth or a Grooved finish to match the upper factory plenum. The billet replacement vacuum block comes as...

Product#: FDV6705S

1967-69 Big Block 4 Bbl Quadrajet Stainless Steel Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: BDV6601S

1966Impala / Full Size 250 6 Cylinder Stainless Steel Material Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: FDV6703S

1967-70 Small Block 4bbl Distributor Vacuum Line Stainless Steel

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: DVL203S

67-69 Distributor Vacuum Line 2 Bbl Small Block Stainless Steel

This stainless steel distributor vacuum line is for the Camaro with a small block V8 and a two-barrel carburetor. The stainless steel line has the appropriate sized fitting on both sides. The vacuum line weighs one ounce and...

Product#: DVL201S

67-69 Distributor Vacuum Line 4 Bbl Small Block Stainless Steel

This stainless steel distributor vacuum line is for the Camaro with a small block V8 and a four-barrel carburetor, excluding the 302 ci V8. The stainless steel line has the appropriate sized fitting on both sides. The vacuum...

Product#: FDV6605S

1966-69 Big Block 4 Bbl Stainless Steel Holley Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: XDV6601S

1966 283 2bbl Stainless Steel Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...

Product#: DVL200S

1967-1969 Camaro Distributor Vacuum Line 6 Cyl Stainless Steel

This stainless steel distributor vacuum line is for the Camaro with a six-cylinder engine. The stainless steel line has the appropriate sized fitting on both sides. The vacuum line weighs two ounces and ships via UPS....

Product#: DVL203

1967-1969 Camaro Distributor Vacuum Line 2 Bbl Small Block OE Material

This distributor vacuum line is for the Camaro with a small block V8 and a two-barrel carburetor. The steel line has the appropriate sized fitting on both sides. The vacuum line weighs one ounce and ships via UPS....

Product#: GN111067

1986-87 Buick Regal; Grand National; Billet Aluminum Vacuum Block; Smooth Black Finish

Our vacuum blocks for 1986-1987 Buick Grand Nationals are produced with pride in the USA. They are available in a Smooth or a Grooved finish to match the upper factory plenum. Comes with gasket. Sold without installation...

Product#: FDV6707S

1967-72 Small Block 2bbl Stainless Steel Distributor Vacuum Line

Replace your original distributor vacuum line with this reproductions which is pre-bent to the correct configuration. For a show quality look, you can choose from the OEM galvanized material or the new longer lasting...