3505GBK - 1967-70; Mustang; Power Rack & Pinion Cradle Kit with Tilt Steering Column Set; with Powder Coated Black Tilt Column; Vehicles with Original Style Spindles and Ford Spline Steering Wheel
3505GBK - 1967-70; Mustang; Power Rack & Pinion Cradle Kit with Tilt Steering Column Set; with Powder Coated Black Tilt Column; Vehicles with Original Style Spindles and Ford Spline Steering Wheel
- Product #: 3505GBK
- CATEGORY: System
- BRAND: Flaming River Steering Parts
- SHIP TYPE: Oversize-2 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
1967-70; Mustang; Power Rack & Pinion Cradle Kit with Tilt Steering Column Set; with Powder Coated Black Tilt Column; Vehicles with Original Style Spindles and Ford Spline Steering Wheel
Flaming River power rack & pinion cradle with tilt steering column set for 1967-70 Mustang models. These sets are stronger, lighter, and more responsive than the stock steering system while retaining the full factory turning radius and increasing travel. Flaming River cradle sets feature a welded cradle that bolts directly to existing holes in the frame, no cutting, drilling, or welding required. This black powder coated stainless steel column adds tilt to your classic Mustang while maintaining an original look, features the correct Ford spline to use with original steering wheels. Hose set sold separately.
Additional Information- For vehicles with stock spindles.
- For vehicles with using original Ford spline steering wheel.
- Recommended for vehicles with small block engines and automatic transmissions.
- Flaming River cradle sets are designed to be used with original exhaust manifolds. Some headers may not work with this rack and pinion cradle system.
- Floor Shift Tilt Column: For original steering wheel, black powdercoat finish.
- NEW power rack and pinion assembly.
- Grade 8 mounting hardware.
- Wiring connector.
- Universal joints.
- Patented rack & pinion cradle. Painted Black
- Power steering pump with bracket and pulley.
- Polished aluminum reservoir with mounting bracket.
- All Flaming River columns are made from 304 grade stainless steel.
- All NEW Power Rack and Pinion with Lifetime Serviceability.
- Stronger Rack Gear - 1 inch diameter.
- More than 6 inches of travel and Full Turning Radius.
- Bolts into Existing Chassis with no Suspension Modification.
- Fluid and Pressure Tested and Certified.
- For Flaming River rack & pinion and remote reservoir stainless steel braided hose kit, order: 3505H
- This rack & pinion kit requires 64-66 Mustang manual V8 style outer tie rods. order (2): 3A130D
- Image is a representation of this item. Actual item and components may vary.
- 1967 - 1970 Ford Mustang
Made in USA
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 73 Lbs
- Dimensions: L: 49" x W: 14" x H: 14"
- Ship Type: Oversize-2 |
- For vehicles with stock spindles.
- For vehicles with using original Ford spline steering wheel.
- Recommended for vehicles with small block engines and automatic transmissions.
- Flaming River cradle sets are designed to be used with original exhaust manifolds. Some headers may not work with this rack and pinion cradle system.
- Floor Shift Tilt Column: For original steering wheel, black powdercoat finish.
- NEW power rack and pinion assembly.
- Grade 8 mounting hardware.
- Wiring connector.
- Universal joints.
- Patented rack & pinion cradle. Painted Black
- Power steering pump with bracket and pulley.
- Polished aluminum reservoir with mounting bracket.
- All Flaming River columns are made from 304 grade stainless steel.
- All NEW Power Rack and Pinion with Lifetime Serviceability.
- Stronger Rack Gear - 1 inch diameter.
- More than 6 inches of travel and Full Turning Radius.
- Bolts into Existing Chassis with no Suspension Modification.
- Fluid and Pressure Tested and Certified.
- For Flaming River rack & pinion and remote reservoir stainless steel braided hose kit, order: 3505H
- This rack & pinion kit requires 64-66 Mustang manual V8 style outer tie rods. order (2): 3A130D
- Image is a representation of this item. Actual item and components may vary.
Product Information
1967-70; Mustang; Power Rack & Pinion Cradle Kit with Tilt Steering Column Set; with Powder Coated Black Tilt Column; Vehicles with Original Style Spindles and Ford Spline Steering Wheel
Flaming River power rack & pinion cradle with tilt steering column set for 1967-70 Mustang models. These sets are stronger, lighter, and more responsive than the stock steering system while retaining the full factory turning radius and increasing travel. Flaming River cradle sets feature a welded cradle that bolts directly to existing holes in the frame, no cutting, drilling, or welding required. This black powder coated stainless steel column adds tilt to your classic Mustang while maintaining an original look, features the correct Ford spline to use with original steering wheels. Hose set sold separately.
Additional Information- For vehicles with stock spindles.
- For vehicles with using original Ford spline steering wheel.
- Recommended for vehicles with small block engines and automatic transmissions.
- Flaming River cradle sets are designed to be used with original exhaust manifolds. Some headers may not work with this rack and pinion cradle system.
- Floor Shift Tilt Column: For original steering wheel, black powdercoat finish.
- NEW power rack and pinion assembly.
- Grade 8 mounting hardware.
- Wiring connector.
- Universal joints.
- Patented rack & pinion cradle. Painted Black
- Power steering pump with bracket and pulley.
- Polished aluminum reservoir with mounting bracket.
- All Flaming River columns are made from 304 grade stainless steel.
- All NEW Power Rack and Pinion with Lifetime Serviceability.
- Stronger Rack Gear - 1 inch diameter.
- More than 6 inches of travel and Full Turning Radius.
- Bolts into Existing Chassis with no Suspension Modification.
- Fluid and Pressure Tested and Certified.
- For Flaming River rack & pinion and remote reservoir stainless steel braided hose kit, order: 3505H
- This rack & pinion kit requires 64-66 Mustang manual V8 style outer tie rods. order (2): 3A130D
- Image is a representation of this item. Actual item and components may vary.
- 1967 - 1970 Ford Mustang
Made in USA
Vehicle Fitment
This product fits the following vehicle applications. Click to view individual years.
Specifications
Product Specifications
Shipping Dimensions- Weight: 73 Lbs
- Dimensions: 49" x 14" x 14"
- Ship Type: Oversize-2 |
- For vehicles with stock spindles.
- For vehicles with using original Ford spline steering wheel.
- Recommended for vehicles with small block engines and automatic transmissions.
- Flaming River cradle sets are designed to be used with original exhaust manifolds. Some headers may not work with this rack and pinion cradle system.
- Floor Shift Tilt Column: For original steering wheel, black powdercoat finish.
- NEW power rack and pinion assembly.
- Grade 8 mounting hardware.
- Wiring connector.
- Universal joints.
- Patented rack & pinion cradle. Painted Black
- Power steering pump with bracket and pulley.
- Polished aluminum reservoir with mounting bracket.
- All Flaming River columns are made from 304 grade stainless steel.
- All NEW Power Rack and Pinion with Lifetime Serviceability.
- Stronger Rack Gear - 1 inch diameter.
- More than 6 inches of travel and Full Turning Radius.
- Bolts into Existing Chassis with no Suspension Modification.
- Fluid and Pressure Tested and Certified.
- For Flaming River rack & pinion and remote reservoir stainless steel braided hose kit, order: 3505H
- This rack & pinion kit requires 64-66 Mustang manual V8 style outer tie rods. order (2): 3A130D
- Image is a representation of this item. Actual item and components may vary.