H5269 - Holley; EFI; Fuel System Kit; Without Pump Or Return Line
H5269 - Holley; EFI; Fuel System Kit; Without Pump Or Return Line
In Stock Now!
- Product #: H5269
- CATEGORY: Aftermarket Fuel Lines
- BRAND: Holley
- SHIP TYPE: Standard |
- Emissions Compliance: Non-CARB Compliant |
Holley; EFI; Fuel System Kit; Without Pump Or Return Line
Holley EFI returnless fuel system kit without pump. This kit includes a Holley prefilter, fittings, and enough Earl's Vapor Guard fuel hose to run a feed line on most vehicles. Holley EFI kits like the Sniper are engineered using Holley components and Earl's plumbing to provide long lasting and dependable performance.
Kit includes:- 20ft of 3/8" Vapor Guard Fuel Hose
- Post Filter
- (7) Vapor Guard Hose Clamps
- (3) 1/4" Straight NPT Male to 3/2" Vapor Guard Hose Fittings
- (1) -6 ST. to 3/8 Vapor Guard Hose End
Important: Not for use on pollution controlled vehicles. See Emission Notes below.
Note: This kit includes many of the same components featured in Holley's EFI Master Kits, most notably without the fuel pump and prefilter. This kit is recommended for pump or race gas use only.
Emission Note 1:For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.
For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
This product is available for all vehicles.
Product Specifications
Shipping Dimensions- Weight: 4 Lbs, 4 Ozs
- Dimensions: L: 13" x W: 12" x H: 8"
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
Holley; EFI; Fuel System Kit; Without Pump Or Return Line
Holley EFI returnless fuel system kit without pump. This kit includes a Holley prefilter, fittings, and enough Earl's Vapor Guard fuel hose to run a feed line on most vehicles. Holley EFI kits like the Sniper are engineered using Holley components and Earl's plumbing to provide long lasting and dependable performance.
Kit includes:- 20ft of 3/8" Vapor Guard Fuel Hose
- Post Filter
- (7) Vapor Guard Hose Clamps
- (3) 1/4" Straight NPT Male to 3/2" Vapor Guard Hose Fittings
- (1) -6 ST. to 3/8 Vapor Guard Hose End
Important: Not for use on pollution controlled vehicles. See Emission Notes below.
Note: This kit includes many of the same components featured in Holley's EFI Master Kits, most notably without the fuel pump and prefilter. This kit is recommended for pump or race gas use only.
Emission Note 1:For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.
For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
This product is available for all vehicles.
Product Specifications
Shipping Dimensions- Weight: 4 Lbs, 4 Ozs
- Dimensions: 13" x 12" x 8"
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
