1968-71 Dodge Plymouth; Fuel Filter, Vapor Separator; with 426, 440
Help prevent vapor lock the way the factory intended by installing the correct fuel filter/vapor separator on your 426 Hemi or 440 ci equipped vehicle. This part mounts near the fuel pump and is designed to filter the fuel...
1968-71 Dodge Plymouth; Fuel Filter, Vapor Separator; with 426, 440
Classic $28.99 ea
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
Edelbrock 3/8" Barbed End Dual Feed Fuel Line without Filter
Designed especially for the new Thunder Series AVS carburetor, this dual feed line includes chromed parts and a stainless steel braided line for high quality looks and performance. Also available with Blue or Polished filter.
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Holley; EFI; Fuel System Kit; Without Pump Or Return Line
Holley EFI returnless fuel system kit without pump. This kit includes a Holley prefilter, fittings, and enough Earl's Vapor Guard fuel hose to run a feed line on most vehicles. Holley EFI kits like the Sniper are engineered...
Clear In-Line Fuel Filter; With Chrome End; 5/16"
Visually inspect the condition of the element. Includes high polished chrome plating for a custom appearance.
Edelbrock Thunder Series Dual Feed Fuel Line with Blue Filter
Designed especially for the new Thunder Series AVS carburetor, this dual feed line includes chromed parts and a stainless steel braided line for high quality looks and performance. For line without fuel filter use Part #...
Holley; EFI; Fuel System Kit; With Return Line; Without Fuel Pump
Holley EFI returnstyle fuel system kit without pump. This kit includes a Holley prefilter, fittings, and enough Earl's Vapor Guard fuel hose to run a feed and return line on most vehicles. Holley EFI kits like the Sniper are...
Holley; EFI; Fuel System Kit; With Return Line; Without Fuel Pump
Classic $399.99 set
Edelbrock Fuel Line Kit - Pro Classic Hose
These high-quality small block Chevrolet fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock™ Single-Feed or Dual-Feed fuel inlet kits. These hose kits...
1959-61 Chevrolet - 4-Way Carburetor Line Adapter (Brass)
Brass adapter fits reproduction fuel lines which extend from the fuel tank to the fuel pump and fuel pump to carburetor. Replacing your fuel line hardware can improve your fuel system while retaining originality....
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6.
Holley; Black Anodized; Billet Aluminum; Adjustable Fuel Line
Black anodized, billet aluminum adjustable fuel line for use on Holley 4150 & 4500 carburetors. This line is manufactured with -8 AN inlet and 3/8" NPT port at the rear end with 7/8" -20 threads for the fuel bowl inlets.
1967-78 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
1967-78 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Classic $3.09 ea
Edelbrock Thunder Series Dual Feed Fuel Line with Polished Aluminum Filter
Designed especially for the new Thunder Series AVS carburetor, this dual feed line includes chromed parts and a stainless steel braided line for high quality looks and performance. For line without fuel filter use Part #...
Edelbrock Thunder Series Dual Feed Fuel Line with Polished Aluminum Filter
Classic $137.99 ea
Aeromotive EFI OEM Returnless Rail Stealth Fuel System
The EFI OEM Returnless Rail Stealth Fuel System is intended to support engines OEM ?Returnless? fuel rails in any car or truck, early or late model. Kit includes all port fittingsIncluding fittings for the Stealth/Phantom...
Edelbrock Fuel Line Kit - Pro Classic Hose
These high-quality big block Chevrolet fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock™ Single-Feed or Dual-Feed fuel inlet kits. These hose kits are...
Holley; Chrome Fuel Line; For 4150 Carburetor
Chrome plated copper dual-feed fuel lines for Holley carburetors. Manufactured with seamless copper tubing and double flared at the ends with 5/8"-18 inverted flare inlets. 9-1/4" center to center.
Billet Specialties Smooth Aluminum Fuel Filter - 3/8" Barb
Billet Specialties aluminum in-line fuel filters for carbureted applications. 4 1/2" x 1 3/8" housing with 3/8" hose barb fittings Note: Not for use with fuel injection systems.
Aeromotive Bypass Carbureted Stealth Fuel System
The Bypass Carbureted Stealth Fuel System is intended to support a return style, single carbureted application with a single AN-06 or AN-08 inlet connection. Kit includes all port fittings for AN-08 supply and return lines...
Holley Dual Feed Line; 9-5/16"; Chrome
Chrome dual-feed fuel line for use on Holley carbs with 9-5/16" inlet center to center. Offers stainless steel construction for a performance appearance and long lasting dependability. Will replace the original exactly.
Holley Dual Feed Chrome Fuel Line; 8-21/32"
Chrome dual-feed fuel line for use on Holley carbs with 8-21/32" inlet center to center. Offers stainless steel construction for a performance appearance and long lasting dependability. Will replace the original exactly.
Holley; Chrome Fuel Line; For 4160 Carburetors
Chrome plated copper dual-feed fuel lines for Holley carburetors. Manufactured with seamless copper tubing and double flared at the ends with 5/8"-18 inverted flare inlets. 8-21/32" center to center.
Edelbrock Fuel Line Kit - Braided Stainless Steel
High-quality Edelbrock small block Chevrolet fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet when using Edelbrock™ Single-Feed or Dual-Feed fuel inlet kits. Each...
Edelbrock Fuel Line Kit - Braided Stainless Steel
These high-quality big block Chevrolet fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock™ Single-Feed or Dual-Feed fuel inlet kits. These hose kits are...
MSD; High Pressure Electric Fuel Pump; Multiport EFI
Multiport EFI systems require a stable fuel supply to maintain best performance throughout the engine's rpm range.
Edelbrock Polished Aluminum Replacement Fuel Filter
This fuel filter is used with single or dual feed lines on Edelbrock Thunder Series or Performer series carburetors.
Edelbrock Blue Anodized Replacement Fuel Filter
This blue anodized replacement fuel filter is used with single or dual feed lines on Edelbrock Thunder Series or Performer series carburetors.
Aeromotive EFI Dual Rail Stealth Fuel System
The EFI Dual Rail Stealth Fuel System is intended to support a return style, dual-fuel rail (V-6 or V-8) EFI application equipped with aftermarket fuel rails using AN-06 connections. Kit includes all port fittingsIncluding...
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
6 Piece 3/8" Notchead Metal Line Clamp Set
This new line fastening system will keep your metal lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps for a clean and simple...
56 Piece Notchead Metal Line Clamp Builder Kit
This new line fastening system will keep your soft lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps for a clean and simple...
6-Piece NotcHead AN-4 or 7/16" Braided Line Clamp Set
NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...
2" ID to 2-1/4" ID Heat-Shrink Hose Clamp
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 2"...
1-1/4" ID to 1-1/2" ID Heat-Shrink Hose Clamp
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 1-1/4"...
Fuel & Oil Resistant Hose; 25" Long x 1/2" I.D.
Main Tank Vent Pipe Upper Hose for 1947-70 GM Trucks. This is a 25-inch section of hose. Use this hose for any application that requires a fuel, vapor, or oil resistant 1/2" hose. Has GM markings 9438382 on the hose.
FiTech black stainless steel fuel hose kit with 10 micron fuel filter, check valve and black anodized fittings.This fuel line kit is designed to enhance your fuel delivery system with exceptional performance and safety. To...
Fi Tech Stainless Steel Hose Kit with Fuel Filter and Check Valve; 20feet with 10 Micron Fuel Filter; Black
Classic $388.99 ea
Replaced your cracked, broken or faded hoses. Original black fuel and vapor hose. Sold by the foot.
1961-82 GM; Pinch Fuel Hose Clamp; 5/16"; Yellow
Reproduction of the correct pinch-type hose clamp for the fuel hoses of your classic Chevrolet. Most commonly used on 1961-1982 vehicles on fuel and vacuum hoses. Correct hardware can make any installation job easier. Replace...
1961-82; GM; Pinch Hose Clamp; for Fuel or Vacuum; 3/8"; Olive Green
Reproduction of the original style green pinch clamp for use with 3/8" fuel or vacuum hoses. This clamp is commonly found on the hose connecting the fuel tank float to the main fuel line leading to the engine. Most commonly...
1-3/4" ID to 2" ID Heat-Shrink Hose Clamp
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 1-3/4"...
1961-82; GM; Pinch Hose Clamp; for Fuel Hose or Vacuum Hose; 1/4"; Red
Reproduction of the original style red pinch clamp for use with 1/4" fuel hose or vacuum hose for use with various 1962-82 GM models as listed. This clamp is commonly found on the fuel vapor return line connecting the fuel...
1961-82; GM; Pinch Hose Clamp; for Fuel Hose or Vacuum Hose; 1/4"; Red
Classic $1.19 ea
6 Piece 3/16" Notchead Metal Line Clamp Set
This new line fastening system will keep your metal lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps for a clean and simple...
6-Piece NotcHead AN-3 or 1/4" Braided Line Clamp Set
NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...
3/4" x 3' Thermo-Flex Hose/Wiring Covering Sleeve with Natural Finish
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
3/4" x 3' Thermo-Flex Hose/Wiring Covering Sleeve with Natural Finish
Classic $18.99 ea
Billet Specialties 5/16" Billet Fuel Hose End w/ Clamp for Rubber Hose
Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.
Billet Specialties 5/16" Billet Fuel Hose End w/ Clamp for Rubber Hose
Classic $22.99 ea
6-Piece NotcHead AN-6 or 9/16" Braided Line Clamp Set
NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...
5/8" x 3' Thermo-Flex Hose/Wiring Covering Sleeve with Natural Finish
Thermo-Flex Aluminum is a composite heat shield material with unlimited uses. The material is manufactured with a combination of materials to provide abrasion-resistance, thermal insulation, and physical containment of hoses...
5/8" x 3' Thermo-Flex Hose/Wiring Covering Sleeve with Natural Finish
Classic $16.99 ea
6 Piece 1/2" Notchead Metal Line Clamp Set
This new line fastening system will keep your metal lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps for a clean and simple...
Billet Specialties 3/8" Billet Fuel Hose End w/ Clamp for Rubber Hose
Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.
Billet Specialties 3/8" Billet Fuel Hose End w/ Clamp for Rubber Hose
Classic $22.99 ea
6-Piece NotcHead AN-8 or 5/8" Braided Line Clamp Set
NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...
This cable clamp kit is for use on Holley model 4010, 4150, and 4160 carburetors only.
1/4" ID to 1/2" ID Heat-Shrink Hose Clamp
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 1 /4"...
Billet Specialties 3/8" Billet Fuel Hose End w/ Clamp for Braided Hose
Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.
Billet Specialties 3/8" Billet Fuel Hose End w/ Clamp for Braided Hose
Classic $22.99 ea
#36 Hose Clamp; Worm Gear Style; 1-3/4" - 2-1/4" Diameter
Worm gear style hose clamp produced in 300 grade stainless steel. Fits 1-1/2" to 2" diemeter hoses. Product Specifications Industry Standard No : 1-1/2 - 2" Clamping Range : 7/8 - 2-3/4" Fits Hose I.D. : 1-3/4 - 2-1/4" Drive...
(3/4" ID to 1-1/16" ID Heat-Shrink Hose Clamp
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 3/4"...
7/8" ID to 1-3/16" ID Heat-Shrink Hose Clamp
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 7/8"...
1" ID to 1-3/16" ID Heat-Shrink Hose Clamp
Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 1"...
1967-72 383 Carter Avs 4 Bbl Pump To Carburetor Line; Stainless Steel Material
Each line is manufactured using a precision process that recreates the exact bends and contours factory original equipment. Couple precise manufacturing techniques with choice material selection and you can be sure that you...
1967-72 383 Carter Avs 4 Bbl Pump To Carburetor Line; Stainless Steel Material
Classic $19.99 ea