1956 Chevrolet Nomad Parts - Steering

New reproduction steering arms for 1955-57 Chevrolet models. Forged to look and perform just like the originals for an authentic appearance. Compatible with Modular drop spindles. Black powdercoat finish.

Our Power Steering Conversion Hose kit is designed to fit the GM Saginaw power steering pump with inverted flare pressure fitting. It also fits the GM 500, 605, 800 and 600 Series power steering gear box! These hose kits are...

This Universal power steering hose kit is for GM vehicles converting to a GM power steering box from an assisted power steering system or 500 Series box. This features inverted flare adjustable fittings which are re-useable...

Reproduction steering idler arm for 1955-57 Bel Air, One-Fifty, Two-Ten, and Nomad models with manual steering. Manufactured to original factory specification, the idler arm bolts to to the frame on the passenger side and the...

This is a complete replacement power steering valve set which includes all parts to replace an original power steering valve with a late model valve, with instructions, no modifications necessary to original parts, a bolt-on...

{fitment}

Complete braided stainless steel hoses and fittings for GM Type 2 power steering pump with remote reservoir and 1979-00 GM steering box with metric o-ringed inlets and outlets. Set contains pressure and return hoses with...

Overhaul kit includes top cover gasket, 2 seals, 3 brass bushings, 2 bearings, 2 races, and 54 ball bearings. NOTE: Note: Does not include sector shaft or rack. No further discounts apply. Applicati ons: 1955-57 Chevrolet...

Reproduction idler arm for 1955-57 Chevrolet models equipped with power steering. Manufactured to original specifications for correct fit and function. Bushing is not included. {fitment}

In-line Magna-Pure Filter - Serviceable Magnetic filter element with patented built in bypass for optimal performance; filters up to 190 micron particles. Protects the entire steering system from contmination. Flushing the...

The adapter screws onto end of the draglink in place of factory power steering control valve. Allows for simple conversion from factory power steering to 500 Series, 600 Series or 605 power steering. Works with factory pitman...

Replacement hose set for 605 power steering gear boxes. Includes clamps, steering O-ring fitting box tube and hose. For use on big or small block.

This rebuild set for 1955-57 Chevy models contains all necessary hardware to rebuild your power steering pump. If your pump is damaged or leaking, it should be rebuilt to maintain the drivability of your vehicle.

This reproduction short heat shield mounts to the exhaust pipe of 1955-57 Chevrolet passenger car models. Protect your power steering components from damaging heat and restore your engine compartment at the same time with...

This reproduction long heat shield mounts to the crossover pipe of 1955-57 Chevrolet passenger car models. Protect your power steering components from damaging heat and restore your engine compartment at the same time with...

All 500 Series power steering boxes are the key components to a high performance modern style power steering system. An open centered, rotary type valve provides smooth operation throughout the steering range while retaining...

This mounting set for 1955-57 Chevy models contains all necessary hardware to mount your power steering cylinder. If your mounts are damaged or misaligned, they should be replaced to maintain the drivability of your vehicle.

This rebuild set for 1955-57 Chevy models contains all necessary hardware to rebuild your power steering cylinder. If your cylinder is damaged or leaking, it should be rebuilt to maintain the drivability of your vehicle.

Aluminum remote reservoir features threaded cap and two machined billet brackets for secure, attractive mounting. Sleek, radiused design for a beautiful engine compartment. This piece has a machined finish. Holds...

Reproduction power steering and generator mounting hardware used on 1958-59 Chevrolet full size passenger cars.

Replaces factory power steering pump/generator assembly when converting to an alternator. This set fits 1955-57 Chevrolet small block with front mounts, short water pump and small balancer. Set includes: Remanufactured pump...

This bracket retains power steering hoses and keeps them from touching exhaust manifolds. Grommet sold separately.

Reproduction pitman arm for 1955-57 Chevrolet full size models equipped with the manual steering. Manufactured to original specifications for correct fit and function. This pitman arm is used with part # 15368 center link,...

This rebuild set for 1955-57 Chevy models contains all necessary hardware to rebuild your power steering control cylinder. If your valve is damaged or leaking, it should be rebuilt to maintain the drivability of your vehicle.

This dust cover mounts on the center link where the pitman arm ball connects. Designed to keep pitman arm ball socket clean and lubricated, each shield includes gasket. Will fit any model 1955-1957 Chevrolet with original...

Cover your power steering reservoir pump cap with this new snap-over plastic cover. Fits most OEM applications 1988-up with Saginaw power steering pump. {specs} {fitment}

This billet aluminum power steering reservoir is designed for March Performance pulley sets that use GM type 2 power steering pumps. Includes cap, mounting bracket and mounting hardware. NOTE: Does not incl ude hoses or...

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose our replacement style power steering pump. Thoroughly remanufactured, this pump is carefully inspected and remanufactured to...

This dust cover mounts on the center link where the pitman arm ball connects. Designed to keep pitman arm ball socket clean and lubricated, each shield includes gasket. Will fit any model 1955-1957 Chevrolet with manual...

Reproduction steering box to frame mounting bolt set for 1955-57 models. Includes three 3/8"-24 x 3-3/4" grade 5 bolts with correct carriage bolt head and three nuts and lock washers.

Improve your manual steering with a idler arm with bearing conversion. This conversion set makes your vehicle steer easier and it also outlasts the original rubber bushings. Includes idler arm, bearings, washers and hardware...

If you’re in the market to replace the worn out, damaged or missing power steering pump, choose our replacement style power steering pump. Thoroughly remanufactured, this pump is carefully inspected and remanufactured to...

Replacement steering rag joints and couplers that install into the lower steering shaft area. Rag joints often wear out from years of use and exposure to engine heat. We have many different sizes and configurations available,...

Borgeson billet aluminum power steering pulley is a single groove, 4-5/8" in diameter, keyway pulley. It is recommended by Borgeson when installing one of their power steering conversions on a Chevrolet having a small block...

These replacement steering rag joints and couplers install into the lower steering shaft area. These often wear out from years of use and exposure to engine heat. We have many different sizes and configurations available so...

Premium reproduction power steering cylinder used on 1955-57 Chevrolet Passenger cars and 1955-59 GM Trucks. The power steering cylinder mounts between the drag link and the frame rail. This cylinder is manufactured in the...

Reproduction of the 12-point, grade 8 bolt that secures the steering coupler to the steering shaft on most GM vehicles. The original couplers came with a 12-point bolt in the location where tightening this bolt squeezes the...

Replacement steering rag joints and couplers that install into the lower steering shaft area. Rag joints often wear out from years of use and exposure to engine heat. We have many different sizes and configurations available,...

Installation parts are the ones to install the steering box to the column.The power steering hose set is for use on a GM pump to GM box. Includes hoses and fittings.

Power steering ram cylinder shouldered bolt works on any 1955-1957 Chevy with original style power steering. This bolt joins the steering ram shaft to the center link.

The power steering ram cylinder bracket is for 1955-1957 Chevy models with factory power steering. Bracket bolts to the frame and the end of the power steering ram attaches to the bracket providing a pressure point for the...

This set works with all power steering pumps including the OEM style generator-mounted pumps. Includes center drag link with an adjustable control valve assist cylinder, pitman arm, idler arm, bolts, hoses, bracket and...

Reproduction pitman arm for 1955-57 Chevrolet full size models equipped with the original factory power assist style power steering. Manufactured to original specifications for correct fit and function. This pitman arm is...

Replacement nut that holds the pitman arm to steering box on 1955-1957 Chevy models.

Chromed steering box cover for 1955-57 Chevy models with original steering boxes. These chromed steel covers will add an extra shine to your engine compartment and cover up that ugly steering box. Available in ribbed or...

Reproduction power steering pump pulley for 1969, 1971-74 V8 models with AC. This 2 groove pulley works on SB or BB with short or long water pump. Pulley has a black coated finish. Replaces GM# 3941107 Applications: 1969 V8...

To complete your ididit steering column installation, you should also replace your rag joint. When installing an ididit column in your car, you must use the correct application to match the column output shaft. This...

To complete your ididit steering column installation, you should also replace your rag joint. When installing an ididit column in your car, you must use the correct application to match the column output shaft. This...

Reproduction power steering hose set for 1955-57 V8 models with original style power steering. This complete 4 piece set includes the high pressure hose, low pressure hose and 2 control valve hoses with correct fittings and...

1967-68 Camaro with SBC

This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...

Replacement lock washer that locks the pitman arm nut to your steering box on 1955-1957 Chevy models.

Upper steering shaft is for 1955-57 Chevy model with 605 or other gear boxes requiring a rag joint or other couplers when stock column is to be retained. It is 31" long has 3/4-36 splines on steering gear box end.

These chromed steering box covers are made specifically for your 605 steering box. Add more shine to your engine compartment. Available in ribbed or louvered. Made in the U.S.A.

This chrome plated self-locking nut is designed for aluminum performance power steering pulleys. It can also be used with OE and aftermarket pulleys on Saginaw power steering pumps with a 9/16"-18 threaded shaft. Made in USA

Old Air Power steering pump bracket for GM small block engines using Wide Mount brackets and a Saginaw power steering pump. Deigned for use with long water pumps.

Billet aluminum remote mount power steering reservoirs from Billet Specialties. Features a double O-ring sealed breathable cap and an internal return tube to prevent foaming. Includes the bracket and stainless steel mounting...