Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...

Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...

Product#: CX1854

1963-66 Chevrolet, GMC Truck; Stepside: Rear Bumper Bracket Set; with Hardware

Reproduction running board splash apron for 1963-66 Chevrolet & GMC truck models. Manufactured in stamped steel replicating the original configuration. Includes the elbow bracket and hardware. This apron mounts from the rear...

Product#: T70550

1963-66 Chevrolet, GMC Truck; Front Bumper Guards; Chrome; Pair

Reproduction of the front bumper guards for 1963-66 Chevrolet and GMC pickup truck models. Each bumper guard is manufactured to fit reproduction or aftermarket front bumpers. Features a bright polished chrome finish. Sold in...

Product#: CX1348

1963-66 Chevy, GMC Fleetside Pickup Truck; Rear Bumper Bracket Set; with Hardware;

Reproduction rear bumper brackets for 1963-66 Chevrolet and GMC Fleetside models. Each bracket is manufactured from quality stamped steel to the correct configuration with pre-punched holes for installation. Will replace the...

Product#: *881356

1960-66 GM Truck Front Bumper Bracket and Hardware Set - 6-Piece Set

Reproduction of the original front bumper bracket set designed for use on 1960-66 GM truck models. Manufactured to factory specifications featuring correct mounting points, each bracket includes EDP coating for rust...

Product#: TR17758B

3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25

Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...

Product#: A15043

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...

Product#: 8557

Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut

Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...

Product#: K225

1938-72 GM Car & Truck; Bumper Bolt, Nut, And Washers; 1/2"-13 X 1-1/2"; Chrome

Reproduction bumper bolt, washer, nut for 1947-72 Chevrolet/GMC trucks and 1938-54 Chevrolet passenger cars. Each 4-piece set features the correct chrome-plated carriage bolt with authentic style tall "Domed Head". Bolt can...

Product#: TF400727

Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...

Product#: *C15323

Plastic Retainer Set; Push-In Type; 1" Head Diameter; For 1/2" Hole; GM # 473798, 5930892, 5973400; Clear; 25 Pieces

Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...

Product#: CT26699

1960-66 Chevrolet, GMC Pickup; License Plate Bracket; Rear; With License Lamp Assembly

Reproduction of the original rear license plate bracket and license lamp assembly for 1960-66 Chevrolet and GMC truck models. Each license bracket is manufactured to replicate the original design and replaces the original...

Product#: K49007

License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear

Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...

Product#: T70546

1960-66 Chevrolet/GMC Truck Front Bumper Bracket; LH

Reproduction front bumper brackets for 1960-66 1/2 and 3/4 ton 2WD truck models. Painted with a rust preventative coating.⁕ Fits left hand (driver) side. ⁕ Many sheet metal products are delivered with a black...

Product#: K219B

1938-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Bumper Bolt Set; Front or Rear; 1/2"-13 x 1-1/2; 10-Piece Bolt Set; Black

Reproduction bumper bolt, washer and nuts for 1947-1972 Chevrolet, GMC pickup truck, Blazer, Jimmy, Suburban models, and 1938-1954 Chevrolet passenger cars in black. Set features the black powder-coated carriage bolt with...

Product#: T70547

1960-66 Chevrolet/GMC Truck Front Bumper Bracket; RH

Reproduction front bumper brackets for 1960-66 1/2 and 3/4 ton 2WD truck models. Painted with a rust preventative coating.⁕ Fits right hand (passenger) side. ⁕ Many sheet metal products are delivered with a black...

Product#: 153999B

1981-87 Buick Regal; Rear License Plate Bracket; also Universal Fit for Trucks and Street Rods with Custom Roll Pans

License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...

Product#: K49067

License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)

Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...

Product#: *C15322

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....