Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: 3864742

1964-71 Chevrolet, GMC Car & Truck; Floor Mounted Accelerator Pedal Pad Trim Plate; Various Models

Correct reproduction accelerator pedal pad stainless trim plate for various 1965-71 GM vehicles. Manufactured in stamped stainless steel, this trim plate helps restore a factory-correct, period-correct pedal appearance with...

Product#: 3864740

1964-71 Chevrolet Car & Truck; Floor Mounted Accelerator Pedal Pad; Rubber; with Steel Insert; Factory Style Reproduction

Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Manufactured in quality hard EPDM rubber, this pad is a great upgrade over plastic service replacement pads and...

Product#: 3798256

1955-69 GM; Accelerator Pedal Firewall Bushings; 1/2" Long, 5/16" I.D.; Pair

Reproduction accelerator firewall bushings for various 1955-69 GM models. These bushings are required to install the accelerator rod support correctly. They help to eliminate excessive play in the gas pedal pad while...

Product#: D1951

Street Demon; TPS Set

When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal...

Product#: BG6012

Lokar Aluminum Throttle Pedal Assembly; Features 2" x 5" Pedal Pad; Black Anodized Finish with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle pedal assembly, features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: S8520

Barefoot Gas Pedal Pad; Chrome With Black Powder Coated Inlay

Stomp on it in true retro style with this groovy barefoot accelerator pedal cover. This far out pedal cover takes you back to the sixties every time you drive your classic. Chrome cover mounts over your existing accelerator...

Product#: SG6007

Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: BG6004

Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: 4868300

1958-71 GM; Accelerator Pedal Ball Stud Pivot; 1/4"-20 x 1-1/2"; Each; Various Models

Reproduction factory ball stud pivot for various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing the gas pedal...

Product#: D1950

Street Demon; Throttle Solenoid Set

Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel Systems includes the solenoid, bracket, and mounting nut....

Product#: SG6017

Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: FM6099

Lokar Eliminator Black Anodized Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: 66180

Chrome Carburetor Return Spring Bracket; Universal

This chrome universal carb return bracket is designed to replace the original bracket for most carburetors. Adds a high performance touch to any carburetor.

Product#: BFG6012

Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: SR4002

Lokar Stainless Steel Throttle Cable Springs

Stainless steel GM designed dual springs for use with Lokars SR4001 bracket (sold separately). Made in USA

Product#: H2088

Holley; Throttle Cable Bracket

This chrome throttle cable bracket can be used with all 4150 and 4160 model square bore Holley carburetors. It includes dual stainless steel return springs.

Product#: DC2083

2 and 4 Bbl Holley Throttle Return Spring Set

Fits Holley 2300 and 2305 2 bbl. or Holley 4150 and 4160 4 bbl. carburetors mounted on any manifold.

Product#: GPS6014B

Lokar Black Anodized Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: FM6098

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: BAG6001

Lokar Billet Aluminum Throttle Pedal Assembly; features 1-1/2" x 4" Pedal Pad; Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: GPS6015

Lokar Chrome Steel 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: BFG6010

Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: SG6016

Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: BAG6004

Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: GPS6016

Lokar Brushed Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: H145212

2011-22 Ford Mustang; Holley Drive by Wire Accelerator Pedal

This Holley DBW accelerator pedal is a perfect compliment to any vehicle using Drive by Wire. Offers plug and play compatibility with Holley EFI and simply bolts in stock locations when used with Holley DBW Pedal Brackets....

Product#: GPS6014

Lokar Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: 3749084

1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel

OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...

Product#: 3863501

1968-74 Buick, Chevrolet, Pontiac, Oldsmobile; Accelerator Pedal Pad to Rod Support

Reproduction of the original style GM accelerator pedal rod support for use on the various Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each support is manufactured in injection molded ABS offering an exact...

Product#: 3923539

1968-69 327, 350 Carb to Accelerator Lever Rod; Small Block with 4 bbl Carb

Reproduction 1968-69 accelerator pedal rod for 327 or 350 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...

Product#: SR4017

Lokar Throttle Cable Bracket & Spring Set - Big Block 502 - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: D1952

Street Demon; Throttle Rod Adapter; For Mechanical Linkage

This throttle rod adapter removes the guesswork when installing a Street Demon carburetor using mechanical linkage in almost any carbureted GM application. All brackets have a clear zinc coating for corrosion protection and...

Product#: SR4006

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Single Hole - Brushed

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets only fit Holley, Edelbrock, AFB, Quadrajet, Demon, & In-Line...

Product#: SR4011

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 2 Holes - Brushed

Brushed Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4008

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Single Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: SR4009

Lokar Throttle Cable Bracket - 1998-99 LS1 Engines w/3" Throttle Linkage Cam - Dual Hole - Black

Black Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4012

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Black

Black Billet Aluminum. Single Hole Stud For Throttle Cable Only. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Carburetor brackets...

Product#: SR4013

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 2 Holes - Black

Black Billet Aluminum. Dual Hole Stud For Throttle Cable & Cruise Control Cable. Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more....

Product#: SR4018

Lokar Throttle Cable Bracket - 2000-02 LS1 Engines w/3-1/2" Throttle Linkage Cam - 1 Hole - Brushed

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: FM6097

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Ball Milled Finish

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: GPS6016B

Lokar Black Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: DBW6200A

Lokar CTS-V Drive-By-Wire Pedal Pad - Brushed w/Rubber Inserts

Billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved pedal pad...

Product#: 3924409

1964-69 Chevrolet; Accelerator Pedal Pad to Rod Support; OE Style; Steel Reproduction; Various Models

Reproduction of the original style stamped steel accelerator pedal pad to rod support unit. This steel reproduction is manufactured to replicate the original in appearance, design and functionality. Includes correct style...

Product#: DBW6200B

Lokar CTS-V Black Anodized Billet Accelerator Pedal

Direct-fit billet accelerator pedal from Lokar! Designed to replace the original pedal pad of CTS-V drive-by-wire pedal. Ideal for applications running an LS-series engine with the CTS-V drive-by-wire pedal. Features a curved...

Product#: 154214

1955-1970 Accelerator Throttle Lever Arm Pinch Bolt Kit

Correct reproduction accelerator throttle lever to pedal rod pinch bolt kit, includes (1) 1/4-20 x 1-1/4" grade 5 bolt, nut & washer. GM Full Size passenger car applications: 1955-1970 Camaro applications: 1967-1969 Chevy...

Product#: D1953

Street Demon; Throttle/Transmission Kickdown Cable Bracket Set

This throttle and transmission kickdown cable bracket set removes the guesswork when installing a Street Demon carburetor in almost any carbureted GM application. All brackets have a clear zinc coating for corrosion...

Product#: TF801171

1994 & Later LT1/LT4 - Black Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: TF801166

Lokar Throttle Cable Bracket - 1985-91 TPI Engines - Triple Hole - Black Finish

This billet aluminum cable bracket from Lokar mounts to the side of your TPI intake plenum and allow you to install your throttle cable. Made in USA Black billet aluminum. Triple hole stud for throttle, kickdown, and cruise...

Product#: TF801167

1992-93 LT1 Lokar Stainless Steel Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: TF801170

1992-93 LT1 - Black Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: SR4015

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Black Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: SR4014

Lokar Throttle Cable Bracket Set - Ram Jet 350 Small Block - Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: TF801168

1994 & Later LT1/LT4 Stainless Steel Lokar Throttle and Kickdown Cable Bracket Set

Lokar's answer to LT cable problems. Stainless Throttle and Kickdown Brackets replace factory brackets. Kits include stainless arm to mount on throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port...

Product#: TF801165

1985-91 TPI Engine Lokar Throttle Cable Bracket - Double Hole - Black Finish

This billet aluminum cable bracket from Lokar mounts to the side of your TPI intake plenum and allow you to install your throttle cable. Made in USA Black billet aluminum. Double hole stud for throttle and ickdown cable only.

Product#: SR4016

Lokar Throttle Cable Bracket & Spring Set - Big Block 502 - Stainless Steel

Lokar throttle cable brackets are available for a variety of different motors including carbureted set ups, LS1, Ram Jet 350 & 502 and more. Finishes include stainless steel, black stainless steel & billet aluminum were...

Product#: E8036

Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Cadmium Plated

Edelbrock throttle, cruise control, and transmission kick down set for pre-1978 small block Chevy cars with a TH350, 200R4, or 700R4 transmission. Manufactured in stamped steel and either chrome or gold cadmium plated....

Product#: E8030

Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Chrome Plated

Edelbrock throttle, cruise control, and transmission kick down set for pre-1978 small block Chevy cars with a TH350, 200R4, or 700R4 transmission. Manufactured in stamped steel and either chrome or gold cadmium plated....

Product#: TF801164

1985-91 TPI Engines Lokar Throttle Cable Bracket - Single Hole - Black Finish

This billet aluminum cable bracket from Lokar mounts to the side of your TPI intake plenum and allow you to install your throttle cable. Made in USA Black billet aluminum. Single hole stud for throttle cable only.