Product#: 66409C

proform Big Block Push Rod Set 3/8" +.405 Tall Deck

Big Block Push Rod Sets: Heat treated one-piece pushrod sets for ôTall Deckö applications. Includes 16 pushrods in a clamshell package.

Product#: EDL31131

DLC Solid Flat Tappet Lifters; GM Applicatons;.842 Dia.; Set of 16

A quality yet inexpensive performance-proven flat tappet lifter. These tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam...

Product#: 61029

1965-76 Oldsmobile 400, 425, 455 CID Big Block V8, Flat Tappet Camshaft; Edelbrock Performer RPM Cylinder Head

The Edelbrock #61029 Performer RPM Cylinder Head for 1965-76 Oldsmobile 400, 425 and 455 CID V8 engines with hydraulic flat tappet cam is a perfect performance upgrade for big-block Olds-powered street machines and muscle...

Product#: AR134711

Chevrolet Small Block ARP 3/8"-24 Rocker Arm Studs

ARP high performance rocker arm studs for Chevrolet Small Block engines are made of 8740 chrome moly forgings and heat-treated to 180,000 psi. Excellent for E.T Bracket Racing, limited rule oval track competition and street...

Product#: 60116

1955-95 GM Small Block; Comp Cams Valve Lock Set

This hardened steel, single groove Steel Street Lock with 7° lock angle and 11/32" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street applications with lighter valve...

Product#: 66950

1955-95 Chevrolet Small Block; 262-400 cid; Proform 3/8" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks through 1986...

Product#: 50316

Comp Cams Valve Stem Seal Set; For 11/32" Valves &.530" Guides

Comp Cams valve stem oil seals positive stop teflon. Guide.530 in. Valve size 11/32 in. - 16. Made in USA Sold as a set of 16.

Product#: 74016

1967-87 Pontiac 326-455CI V8 Valve Spring Retainer Set

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with FEA...

Product#: 61116

Comp Cams Valve Lock Set; Super Locks; 10 Degree Angle; 11/32" Stem Size; 16 Qty

These Comp Cams 611-16 Steel Super Locks™ featuring a lash cap recess, 10° lock angle and 11/32" valve stem size are recommended for all race applications. Super Locks™ have a wider angle (10°) that better...

Product#: 66935

Proform 3/8"-24 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.

Product#: 66936

Proform 7/16"-20 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.

Product#: 66951

1955-95 Chevrolet Small Block; 262-400 cid; Proform 7/16" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks with 7/16"...

Product#: E77790

Big Block Edelbrock Red Roller Rocker Arms- 7/16", 1.7 Ratio

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...

Product#: E77770

Small Block Edelbrock Red Roller Rocker Arms- 1.5 Ratio For 3/8" Stud

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...

Product#: G5059

1968-79 GM 350 Valve Spring

Original GM Valve Springs: Replace your engine parts with genuine GM products.

Product#: G9245

GM Engine 15/16" Dia. Rocker Arm Ball

Product#: 66821-BCHW

Spark Plug Thread Chaser

Avoid stripped spark plug holes with our affordable spark plug hole thread chaser. Double ended to fit 14mm and 18mm threads.

Product#: 12557390

3/8"-24 Rocker Arm Nut

Don't cheap out with inferior rocker arm nuts--use Melling! These rocker arm nuts from Melling are made from quality-grade steel for strength and durability. They're designed to keep your rocker arms positively locked for...

Product#: 6565D

1958-76 Ford / Mercury; 390/428 FE/MEL; Engine Push Rod;

Stock replacement push rod for 1958-76 Ford FE V8 engines. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes.

Product#: 6565A

1962-69 Ford / Mercury; 221 / 260 / 289 / 302; Engine Push Rod;

Stock replacement push rod for 1962-69 Ford small-block engines. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes.

Product#: CC83216

1964-95 Mustang Small / Big Block Comp Cams High Energy Hydraulic Flat Tappet Lifter Set

COMP Cams® performance replacement lifters for Ford Mustang V8s. Made in USA Sold as a set of 16. Specifications:.875" Diameter 105g Weight 2.02" Seat Height

Product#: 6565F

1960-76 Ford / Mercury; 144/170/200 L6; Engine Push Rod; w/ Adjustable Rockers

Stock replacement push rod for 1960-76 144, 170, and 200 ci straight-6 engines with adjustable rockers. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing...

Product#: 6565D2

1958-67 Ford / Mercury; 332/352/360/390/428 FE/MEL; Engine Push Rod;

Stock replacement push rod for 1958-67 Ford FE V8 engines. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing processes.

Product#: CC85116

1964-95 Mustang Small / Big Block Comp Cams OE Style Hydraulic Roller Lifter Set

COMP Cams® performance replacement lifters for Ford Mustang V8s. Made in USA Sold as a set of 16. Specifications:.875" Diameter 135g Weight 2.60" Seat Height Application Notes: Ford Small Block: Use in blocks originally...

Product#: 6565F1

1964-83 Ford / Mercury; 170/200 L6; Engine Push Rod; w/ Non-Adjustable Rockers

Stock replacement push rod for 1960-76 170, and 200 ci straight-6 engines with non-adjustable rockers. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing...

Product#: CC7831

1965-95 Mustang Small Block with Flat Tappet Cam Comp Cams High Energy™ Pushrod Set

Heat treated 5/16" diameter pushrods with welded ball ends for small block applications. Includes 16 pushrods. Made in USA

Product#: AFR1402

AFR Renegade SBF 20° Cylinder Head 165cc ,Street Heads, 58cc chambers, Stud Mount, Assembled

AFR's 165cc "Street" cylinder heads are the preferred choice over re-worked factory heads. They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout, in addition...

Product#: CC83112

1965-97 Ford 240-300 Straight-6 Comp Cams Solid/Mechanical Lifters

Comp Cams solid/mechanical lifters for 1965-97 Ford 240-300 straight-6 engines. These lifters feature precision-ground crown radius and surface finishes to promote performance camshaft compatibility and high-rpm durability....

Product#: CC83212

1965-97 Ford 240-300 L6 Comp Cams High Energy Series Hydraulic Lifters

Comp Cams High Energy hydraulic lifters for 1965-97 Ford 240-300 straight-6 engines. These lifters feature a longer piston than conventional hydraulic lifters, which provides more load bearing surface & increases lifter...

Product#: 6565J

1965-96 Ford / Mercury; 240/300 L6; Engine Push Rod;

Stock replacement push rod for 1965-96 240 and 300 ci straight-6 engines with adjustable rockers. These push rods are built to the most stringent specifications using only the highest quality materials and manufacturing...

Product#: EDL8552

1965-95 Ford 289-302 7/16" Edelbrock Head Bolt Set

This Edelbrock bolt kit contains a set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Made in USA Reduced...

Product#: CC83412

1964-73, 1979-82 Mustang 170-250 6 Cylinder Comp Cams High Energy&trade Hydraulic Lifters

Comp Cams High Energy 170-250ci. straight six performance hydraulic flat tappet lifters. They feature heat treated pushrod seats for strength and wear resistance and longer pistons to provide more load bearing surface for...

Product#: CC7833

1965-72 Ford FE Block Comp Cams High Energy Pushrod Set

Heat treated 5/16" diameter pushrods with welded ball ends for 1965-72 Ford FE Block. Set Includes 16 pushrods. Made in USA Application Notes: Only works with non-adjustable factory rocker arms.

Product#: 66911C-BCHW

Extruded Aluminum Roller-Rocker Arms. Ford S/B, 1.6 Ratio, 3/8" Stud.

Rid your engine of internal friction with roller-tipped rocker arms. The race-proven full needle bearing, fulcrum and roller tip not only unleash horsepower, they also lengthen valve train component life and reduce wear and...

Product#: EDL2122

Edelbrock Performer Plus 289-302 Camshaft Set

This Edelbrock Performer-Plus Camshaft is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles...

Product#: CC31218D

1964-73, 1975-79 Mustang 289-302 Comp Cams 1500-5500 RPM High Energy™ Complete Camshaft Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31215D

1964-73, 1975-79 Mustang 289-302 Comp Cams 800-4800 RPM High Energy™ Complete Camshaft Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: A66426

Ford 390-428 2-Piece Adjustable Pushrod Set - Hydraulic Lifters - 3/8 Diameter 9.234" Length

Proform stock length high performance ball / cup Style push rods for Ford V8 FE engines. They are precision formed from heat treated 4130 chromemoly material with.065 wall thickness for optimum wear characteristics and...

Product#: A66425

Ford 390-429 2-Piece Pushrods - Solid Shell Style Lifters- 5/16 Diameter 10.656" Length

Proform stock length high performance ball / cup Style push rods for Ford V8 FE engines. They are precision formed from heat treated 4130 chromemoly material with.065 wall thickness for optimum wear characteristics and...

Product#: AFR1388

AFR Renegade SBF 20° Cylinder Head 185cc, No EGR or Air Pump, Strip Head, 58cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1422

AFR Renegade SBF 20° Cylinder Head 185cc, Street Heads, 58cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1399

AFR Renegade SBF 20° Cylinder Head 165cc, No EGR or Air Pump, Strip Head, 58cc chambers, Stud Mount, Assembled

AFR's 165cc "Street" cylinder heads are the preferred choice over re-worked factory heads. They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout, in addition...

Product#: CC31215C

1964-73, 1975-79 Mustang 289-302 Comp Cams 800-4800 RPM High Energy™ Cam, Lifter & Timing Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31216B

1964-73, 1975-79 Mustang 289-302 Comp Cams 1200-5200 RPM High Energy™ Camshaft and Lifter Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31215B

1964-73, 1975-79 Mustang 289-302 Comp Cams 800-4800 RPM High Energy™ Camshaft and Lifter Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31218B

1964-73, 1975-79 Mustang 289-302 Comp Cams 1500-5500 RPM High Energy™ Camshaft and Lifter Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31218C

1964-73, 1975-79 Mustang 289-302 Comp Cams 1500-5500 RPM High Energy™ Cam, Lifter & Timing Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31115C

1964-73, 1975-79 Mustang 289-302 Comp Cams High Energy™ 800-4500 RPM Cam, Lifter & Timing Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31115B

1964-73, 1975-79 Mustang 289-302 Comp Cams High Energy™ 800-4500 RPM Camshaft and Lifter Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: CC31115D

1964-73, 1975-79 Mustang 289-302 Comp Cams High Energy™ 800-4500 RPM Complete Camshaft Set

All of Comp Cams' High Energy™ designs are totally streetable. They will produce 10 to 30% more power than a stock cam throughout the RPM range. High Energy™ Cams work great for everyday driving without the "bad"...

Product#: AFR1387

AFR Renegade SBF 20° Cylinder Head 185cc, No EGR or Air Pump, Strip Head, 72cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1420

AFR Renegade SBF 20° Cylinder Head 185cc, Street Heads, 72cc chambers, Stud Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: AFR1472

AFR Renegade SBF 20° Cylinder Head 165cc, Street Heads, 58cc chambers, Pedestal Mount, Assembled

AFR's 165cc "Street" cylinder heads are the preferred choice over re-worked factory heads. They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout, in addition...

Product#: AFR1351

AFR Enforcer SBF Cylinder Head 185cc Street Heads, stud mount; Assembled

AFR's 185cc SBF Enforcer Cylinder heads feature our Permanent Mold ?As-Cast? Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port...

Product#: AFR1492

AFR Renegade SBF 20° Cylinder Head 185cc Street Heads, 58cc chambers, Pedestal Mount, Assembled

AFR's 185cc "Street" cylinder heads feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for engines from 302-393 cubic inches, operating up to...

Product#: EDL60329

1964-95 Ford 289/302/351W; Edelbrock Performer Cylinder Head; With Hydraulic Flat Tappet Cam; 1.900"

The Edelbrock Performer Cylinder Head is designed for 1965-95 Ford 289, 302 & 351W c.i.d. engine applications. 50-state street legal and provides outstanding performance from Idle-5,500 RPM's. Perfect for street performance,...

Product#: CC17044

Ford 289-351W Comp Cams High Energy 7/16" Stud Mount 1.6:1 Aluminum Roller Rockers

COMP Cams® High Energy™ die cast aluminum roller rocker arms for Ford V8 applications. These rockers feature needle bearing fulcrums and roller tips to reduce friction. The rugged cast aluminum construction is...

Product#: CC17043

Ford 289-351W Comp Cams High Energy 3/8" Stud Mount 1.6:1 Aluminum Roller Rockers

COMP Cams® High Energy™ die cast aluminum roller rocker arms for Ford V8 applications. These rockers feature needle bearing fulcrums and roller tips to reduce friction. The rugged cast aluminum construction is...

Product#: CC19043

Ford 289-351W Comp Cams Ultra Gold 3/8" Stud Mount 1.6:1 Aluminum Roller Rockers

COMP Cams® Ultra Gold™ CNC machined extruded aluminum roller rocker arms are designed specifically for high performance street and race engines. Their new and improved ARC design offers more strength without...

Product#: CC19044

Ford 289-351W Comp Cams Ultra Gold 7/16" Stud Mount 1.6:1 Aluminum Roller Rockers

COMP Cams® Ultra Gold™ CNC machined extruded aluminum roller rocker arms are designed specifically for high performance street and race engines. Their new and improved ARC design offers more strength without...