Product#: RB358

Retro Sound 4" X 10" Stereo Dash Speaker; Dual Voice Coil; 25 watts RMS/50 watts MAX power

RetroSound® Stereo Dash Speakers produce a stereo mix from a single speaker location. These dual voice coil speakers are designed to perform well in an open-air environment to provide the best possible audio quality in...


200 Watt Undercover II Stealth Speakers with 8" Woofer
FEATURED

Product#: S5064

200 Watt Undercover II Stealth Speakers with 8" Woofer

Want a little more out of your hidden speaker system? This is the way to get it. These Undercover II speakers feature an 8" woofer and 2 piezo tweeters in each box. Ths system can be mounted in many of the same locations as...


Product#: RB332

Retro Sound 160 Watt Ultra Thin 4" x 10" Universal Dual Voice Coil Replacement Speaker

RetroSound® Ultra Thin Dual Voice Coil replacement speakers are just what you are looking for to finish your sound system. This premium speaker has an acoustically transparent cone to protect the drivers and cones from...


Product#: 154928

Kick Panel Speakers; with Grills; 5-1/2" Coaxial Premium; 100 Watts; 90-13KHZ Frequency Response; Pair

Our Premium 5-1/2" round coaxial stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 100 watts peak power capacity and a frequency response of 90-13KHZ. Ultra thin design makes this...


Product#: RD6480Z

1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth; 6"x9" Rear Speaker Grille; With 4 Mounting Studs

Reproduction rear speaker grille for various GM, Ford, and Chrysler models including 1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth. Fits Chevelle, Malibu, Impala, Caprice and Nova among other models....


Product#: 154927

Premium Kick Panel Speakers; 4"; 70 Watts Peak Power; Pair

Our Premium 4" round stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 70 watts peak power capacity and a frequency response of 100-13 KHZ. 2" deep design makes this speaker...


Product#: 824300

Universal Spacer; Kick Panel; 6-6.5 Speakers

Universal 1 inch thick spacer for vehicles that need more depth to mount speaker in door or kick panel or anywhere extra depth is needed. These spacers are for 6-6.5 inch speakers. Will also work with most 5-1/4 speakers....


Product#: RS693N

RetroSound 6x9" 3-Way Premium Ultra-thin Replacement Speakers

These RetroSound® 6x9-inch stereo speakers are a great way to upgrade the sound in your classic. They use a Neodymium magnet structure for high power handling in a slim-mount design -- mounting depth is just 2.2-inches...


Product#: 3961598

1970 Chevrolet; Rear Speaker Grille; with 4 Mounting Studs; Various Models

Reproduction rear speaker grille for various GMmodels. Correct for 1970 Chevelle, Nova, Impala, Caprice and Monte Carlo. This speaker grill features straight sides and four built-in studs like the original. This is a...


Kenwood 3-Way 6" X 9" Speakers - 400W Peak / 45W RMS
FEATURED

Product#: SPUV70

Kenwood 3-Way 6" X 9" Speakers - 400W Peak / 45W RMS

This set of Kenwood triaxial 6" x 9" speakers perfect for any muscle car or truck owner looking to improve their audio experience. Each set includes two 6" x 9" speakers and grilles. Specifications: Woofer: 6" x 9" Cone...


Product#: RB361

RetroSound R-452N 4" Premium Ultra-thin Replacement Speakers

These RetroSound® 4-inch stereo speakers are a great way to upgrade the sound in your classic. They use a Neodymium magnet structure for high power handling in a slim-mount design - mounting depth is just 1.8-inches...


RetroSound SUB8100 Powered 8" Subwoofer
FEATURED

Product#: RB450

RetroSound SUB8100 Powered 8" Subwoofer

The RetroSound® SUB8100 is a powerful 8-inch amplified subwoofer system designed to fill in the low frequencies usually missing from classic car and truck sound systems. This compact subwoofer measures just 2 3/4 inches...


Product#: DE050310

DEI Boom Mat 4" Round Speaker Baffles - Standard Depth

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


120 Watt Undercover Stealth Speakers with 5-1/2" Woofers
FEATURED

Product#: S5060

120 Watt Undercover Stealth Speakers with 5-1/2" Woofers

These speakers were designed and manufactured specifically for "under seat" on most pre '78 cars and trucks or horizontal "wall" installations. If you've got the space we have the solution! The 120 watt capacity compact units...


Product#: S412

Retro Sound 4" x 10" Triax Stereo Speaker Set; 25 watts RMS; 50 Watts MAX power; 2.28 inch, 58mm Depth; Without Grills; Pair

RetroSound Stereo Speakers are designed for maximum performance in your classic car or truck. Our Stereo Speakers use a ceramic magnet structure for high power handling, with a dip-cut design to prevent distortion. The Mylar...


Custom Autosound 3-Way 6" X 9" Speakers - 200W Peak
FEATURED

Product#: SPUV69

Custom Autosound 3-Way 6" X 9" Speakers - 200W Peak

Enhance sound quality by replacing OEM speakers with Custom Autosound triaxial stereo speakers. Each set comes complete with two 6" x 9" speakers, wire hardware and paintable, flat black speaker grills. Perfect for your rear...


Product#: RB360

RetroSound S-42 4" Round Standard Series Stereo Speakers

These RetroSound® 4-inch stereo speakers offer high quality sound at an exceptional value. Mylar tweeters produce crisp, clear highs. Treated foam surrounds offer smooth sound and remarkable durability. Speaker grills not...


Product#: S412G

4" x 10" Speaker Grill; With Mounting Ring

These 4x10-inch speaker grills are a great way to protect your speaker from damage. They can also be used to replace a worn or broken grill. The low-key black mesh grill is an attractive addition to your classic ride. A...


Product#: MB2099

Universal Fit 80 Watt Dual Speaker

Upgrade your original single dash speaker to a dual speaker system. Features two 4" speakers. Measurements: 11-1/2" center to center on the holes 4-1/2" width 12-1/2" overall length


Product#: TF901024

1955-57 Chevy Bel Air, 150, 210; Pipe Organ Universal Speaker Covers; 5" x 7" or 6" x 9"; ABS Chrome

These universal retro chrome pipe organ speaker covers are the perfect custom accessory for any 1955-57 Chevy Bel Air, 510, or 210 models. Whether you have a stock or custom interior, these pipe organ-style covers are a great...


Product#: AV018

ABS Textured Plastic Sheet 1/8" Thick x 12" x 24"; For Custom Dash Plates

Textured ABS plastic sheet is ideal for making custom trim plates for radios, EQs, crossovers, front panels, and more. Textured front, smooth back. Easy to trace on. Tough and impact-resistant, this material works well for...


Product#: TF901025

1955-81 Universal Speaker Covers; Musical Note" Design; Chrome; 6" x 9"; with 4 Screws; Each

These universal retro chrome "Musical Note" speaker covers are the perfect custom accessory for any GM, Chrysler, or Ford vehicles with a rear seat shelf. Whether you have a stock or custom interior, these "Musical Note"...


Product#: RPOD4A463N

RetroPod 4x6-inch Surface Mount Speaker Modules; w/ Premium Speakers

RetroPods are the perfect solution for adding speakers to a classic car or truck without cutting or modifying the original interior. They mount on any flat surface and can be painted or wrapped to match the vehicle's interior...


Product#: TF901026

1955-81 Universal Speaker Covers; Musical Note" Design; Black; 6" x 9"; with 4 Screws; Each

These universal retro chrome "Musical Note" speaker covers are the perfect custom accessory for any GM, Chrysler, or Ford vehicles with a rear seat shelf. Whether you have a stock or custom interior, these "Musical Note"...


Product#: AV1004

Front Door, Rear Pillar; Replacement Speaker; 4" Drop-in; Various Models

GRS AS-series car replacement speakers are economical drop-in replacements for blown, damaged, or dry-rotted speakers used in many vehicle models. The moisture resistant polypropylene cone reduces the chance of fading and...


Product#: 824400

Universal Spacer; Kick Panel; 6-6.5 Speakers

Universal 1/2 inch thick spacer for vehicles that need more depth to mount speaker in door or kick panel or anywhere extra depth is needed. These spacers are for 6-6.5 inch speakers. Will also work with most 5-1/4 speakers....


Product#: RB333

Retro Sound 100 Watt Ultra Thin 5" X 7" Universal Dual Voice Coil Replacement Speaker

Retro Sound Ultra Thin Dual Voice Coil replacement speakers are just what you are looking for to finish your sound system. This speaker has an acoustically transparent cone to protect the drivers and cones from the elements....


Product#: AV332

ABS Textured Plastic Sheet; 3/32" Thick x 12" x 24"; For Custom Dash Plates

Textured ABS plastic sheet is ideal for making custom trim plates for radios, EQs, crossovers, front panels, and more. Textured front, smooth back. Easy to trace on. Tough and impact-resistant, this material works well for...


Product#: DE050331

DEI Boom Mat 6 1/2" Round Speaker Baffles - Slim

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: RPOD4A

RetroPod 4x6-inch Surface Mount Speaker Modules

RetroPods are the perfect solution for adding speakers to a classic car or truck without cutting or modifying the original interior. They mount on any flat surface and can be painted or wrapped to match the vehicle's interior...


Product#: DE050330

DEI Boom Mat 6 1/2" Round Speaker Baffles - Standard Depth

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: AV116

ABS Textured Plastic Sheet 1/16" Thick x 12" x 24"; for Custom Dash Plates

Textured ABS plastic sheet is ideal for making custom trim plates for radios, EQs, crossovers, front panels, and more. Textured front, smooth back. Easy to trace on. Tough and impact-resistant, this material works well for...


Product#: DE050321

DEI Boom Mat 5 1/4" Round Speaker Baffles - Slim

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050370

DEI Boom Mat 6" x 8" Oval Speaker Baffles - Standard Depth

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050340

DEI Boom Mat 6 3/4" Round Speaker Baffles - Standard Depth

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050311

DEI Boom Mat 4" Round Speaker Baffles - Slim

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050320

DEI Boom Mat 5 1/4" Round Speaker Baffles - Standard Depth

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050351

DEI Boom Mat 4" x 6" Oval Speaker Baffles - Slim

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050350

DEI Boom Mat 4" x 6" Oval Speaker Baffles - Standard Depth

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050341

DEI Boom Mat 6 3/4" Round Speaker Baffles - Slim

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: DE050360

DEI Boom Mat 5" x 7" Oval Speaker Baffles - Standard Depth

Boom Mat speaker baffles will maximize speaker performance by isolating the correct frequency responses while damping reverberation in the sheet metal and panel to frame resonance. Also forms a water tight protective shell to...


Product#: S5013

80 Watt Dual Center Dash Speaker

Quality replacement for original front in-dash speakers. These great quality speakers can handle up to 80 watts and are built and designed to fit directly under the dash as original, wiring is included. Note: Speakers have a...


Product#: S5036

4" x 10" Mono Dash Speaker; Screw Mount; 140 Watt; Dual Voice Coil

Our new dual voice coil (DVC) speakers will give you the best quality sound possible from your original mono speaker location. This speaker has up to 70% more cone area than the conventional dual speaker setup giving you...


Product#: 18808A

1964-73 Ford/Mercury; 4"X10" Radio Speaker; Front Or Rear; Various Models

Reproduction of the original style speaker for use in the dash or for the rear package tray. This quality replacement can be installed in 1965-66 Mustang models for a dash mounted speaker (single), or the 1969-73 Mustang...


Product#: 18808C

1960-73 Ford/Mercury; Rear Deck Mount Speaker; 6" X 9"

6 X 9 rear deck replacement radio speaker for 1965-68 Mustang and various other Ford and Mercury models. This is a replacement for the rear package tray on Mustang and other models. See other listings below. Ford...


Product#: RS483

Retro Sound 150 Watt Ultra Thin 4" x 8" Universal Single Voice Coil Replacement Speaker

Retro Sound Ultra Thin speakers are just what you are looking for to finish your sound system. These speakers have an acoustically transparent cone to protect the drivers and cone from the elements. They a 3-way midrange...


Product#: HK184

1965-93 Ford Rubber Bumpers; Various Models And Uses

Reproduction of the original rubber bumpers designed for use on various 1965-93 Mustangs. Each bumper is designed to replace the original exactly. Bumpers are molded in E.P.D.M rubber compound correctly replicating the...


Product#: 2340X3

1965-66 Ford Mustang; Coupe/Fastback; Kick Panels With 120 Watt Kenwood Speakers; Black

Powerful 6- 1/2" speakers rated at 120 watts are molded into these authentic looking kick panels. Installation is as easy as hooking up two speaker wires and attaching each kick panel with the two factory screws. The kick...


Product#: 2340B65

1964-69 Ford Mustang; ''Back Seat Driver''; Bass Speaker Kit

Add some bottom end power to your audio system with this great custom bass speaker panel. Mounts to the back of the rear seat through the trunk and includes all cables and wiring. Will fit 1964.5 - 1969 models only. Includes...


Product#: 18978A

1965-71 Ford Mustang; Rear Speaker Grille; 6X9

6x9 speaker grille fits in the rear package tray area. It covers the rear speaker in your Mustang. Sold individually.


Product#: M18808C

1964-70 Ford/Mercury; Various Models; Coaxial Door Speakers; 4" X 6"

These aftermarket speakers are designed to fit in your door. If your speakers need to be replaced, and you're looking to upgrade the sound of your Mustang these speakers are what you need. For door mounting as original on...


Product#: M18808B

1965-66 Ford Mustang; Dash Top Mounted Dual Speaker; Upgraded Version

Adding stereo sound to your Classic doesn't have to involve cutting the doors, door panels or package shelf to install stereo speakers. The dash mounted dual speaker easily installs in stock dash speaker location to produce...


Product#: HK118

1965-68 Mustang; Wiring Clips; For Door Speaker, Dome Light, Door Courtesy Light Wiring Looms

Wire loom clips for the 1966 Mustang. This clip is used on each door to secure the speaker wire to the inner door sheet metal. This black plastic clip fastens to sheet metal and snaps shut on wire loom. Fits various Ford and...


Product#: RS7073

1964-66 Mustang Kick Panels with Premium Neodymium 100 Watt 6.5" Speakers

RetroSound kick panels mount easily in your classic 1964-66 Mustang Coupe or Fastback. Features textured finish and can be painted to match your interior. The speaker mount is angled to direct sound upwards towards the...


Product#: 18798A

1966 Ford Mustang; Door Speaker Grilles; 4X6

Reproduction door speaker grills for 1966 Mustang models. Each set of 4" x 6" speaker grilles fit in the inner door panels to cover and protect the door speakers in your Mustang. Manufactured to original factory...


Product#: HK176

1965-66 Ford Mustang; Speaker Grill Mounting Screw Set

Reproduction of the original type speaker grill screws for 1965-66 Mustang models. These # 8 x 1-1/4" phillips, oval head tapping screw with # 6 head will correctly replace the original screws when adding or changing the...


Product#: RS7070

1964-66 Mustang Coupe or Fastback Kick Panels - Blank

RetroSound kick panels mount easily in your classic 1964-66 Mustang Coupe or Fastback, and will fit most 6.5" speakers. Features textured finish and can be painted to match your interior. The speaker mount is angled to direct...


Product#: 2340X2

1965-66 Ford Mustang; Convertible; Kick Panels With Speakers; 100 Watts

Powerful 6-1/2" speakers are molded into these authentic looking kick panels. Installation is as easy as hooking up two speaker wires and attaching each kick panel with the two factory screws. Sold as a pair. The kick panels...


Product#: RS7072

1964-66 Mustang Kick Panels with Standard RetroMod 50 Watt 6.5" Speakers

RetroSound kick panels mount easily in your classic 1964-66 Mustang Coupe or Fastback. Features textured finish and can be painted to match your interior. The speaker mount is angled to direct sound upwards towards the...


Product#: 2340X6

1964-66 Mustang; Convertible; Kick Panels For Speaker Pods; Black

These kick panels for 1964-66 Mustang convertible models have speaker pods molded in for mounting your choice of 6-1/2" speakers. Refer to speakers, part # 154928, sold separately. These kick panels, without speakers, are...