Product#: EMP330

Exhaust Manifold Smog Tube Eliminator - 1/2"-20

Correct block-off plug used when converting currently produced exhaust manifolds with holes for smog tubes back to pre-smog usage. Each 8 cylinder manifold requires 4 plugs per side.

Product#: VT6B14

Vapor Trapper; 6" Black Charcoal Canister; 1/4" Barb Fittings; w/ Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT8B38

Vapor Trapper; 8" Black Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: CHARKIT

Charcoal Refill Kit for Vapor Trapper Canister

Maintain peak performance of your Vapor Trapper with their proprietary Charcoal Refill Kit. The same high-efficiency media used in every Vapor Trapper unit. Formulated for a dense, secure pack, this specialized blend is...

Product#: VT6B38

Vapor Trapper; 6" Black Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT6S14

Vapor Trapper; 6" Silver Charcoal Canister; 1/4" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT6S38

Vapor Trapper; 6" Silver Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: 175020SCA

Chevrolet Small Block; Vintage Air; Front Runner Drive Set; Without Power Steering; Bright Finish

This Vintage Air Front Runner Drive system for Chevrolet Small Block engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...

Product#: VT8B14

Vapor Trapper; 8" Black Charcoal Canister; 1/4" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: BC25B2

Vapor Trapper Billet Clamp Set; Black; 2 pack

Secure your Vapor Trapper with confidence using precision-engineered Black anodized 2.5-inch Billet Clamps. Crafted from high-quality billet aluminum, these clamps provide a solid, reliable hold for long-term stability. We...

Product#: VT8S38

Vapor Trapper; 8" Silver Charcoal Canister; 3/8" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: VT8S14

Vapor Trapper; 8" Silver Charcoal Canister; 1/4" Barb Fittings; w/Dell Clamps

The Shop48 Vapor Trapper is a high-performance, American-made charcoal canister engineered from billet aluminum to eliminate fuel odors from vented fuel tanks. Designed for maximum efficiency, it keeps your garage or vehicle...

Product#: BC252

Vapor Trapper Billet Clamp Set; Silver; 2 pack

Secure your Vapor Trapper with confidence using precision-engineered Silver anodized 2.5-inch Billet Clamps. Crafted from high-quality billet aluminum, these clamps provide a solid, reliable hold for long-term stability. We...

Product#: G9110

A.I.R. And EGR Vacuum Hose; 5/32" ID; 2 Foot Length

Original A.I.R. or EGR vacuum hose which can be purchased in a 2 foot length. The dimensions are 5/32 I.D. hose x 24 inches.

Product#: 153781

1955-67 Chevrolet; Crankcase Vent Tube Assembly; Small Block; 283ci, 327ci

Reproduction of the original crankcase vent tube assembly for Chevrolet 1964-67 283 and 327 non hi-performance small block engines (most 2 bbl vehicles). This vent tube is designed to be used with an inline PCV valve, usually...

Product#: 60406

Painless Oxygen Sensor Bung Fitting

Direct weld-in oxygen sensor fitting for all fuel injection systems. Fits TBI, TPI, CMFI, LT1, LSX, 5.0L and most other oxygen sensors.

Product#: 12562568

1966-2001 Buick, Chevy, Pontiac, Olds; Smog Pump Check Valve: with 3/4" OD Hose

Reproduction smog pump check valve for various 1966-2001 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. This reproduction is designed to replace the existing valve and features an original black finish...

Product#: SPE9774

Spectre 9774; Performance Mass Air Flow Couplers

This kit comes with one 3.625 in. to 4.000 in. and two 3.875 in. to 4.000 in. reducers. It adapts most boot-in style GM mass airflow sensors to a 4.000 in. intake system.

Product#: 09033

K&N; Neoprene Gasket for Mass Air Flow

Mass air flow gasket for GM Vehicles. K & N part # 09033

Product#: E1476

Egr Adapter

Edelbrock EGR Adapter # 1476 has made installing your new intake and carburetor easier when using Part # 3701 and # 3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to allow clearance for your...

Product#: 174011

LS1/LS2 Black Hardcoat Finish Vintage Air Front Runner Drive Set (Power Steering with Pump)

This Vintage Air Front Runner™ Drive system for GM LS1 and LS2 engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...

Product#: 174010SCA

1955-82 Chevrolet; Front Runner Drive Set without Pump; Small Block;with Power Steering; Black Finish

This Vintage Air Front Runner Drive system for Chevrolet Small Block engines allows the use of serpentine belt systems found on modern vehicles. The compact package is designed for continuous SAE-spec static and dynamic belt...

Product#: E251

1967-78 Camaro, Impala, Nova, Chevy/GMC Truck; Smog Tube Extension; Small Block

Reproduction A.I.R. smog tube extension tube for 1967-78 GM models as listed. Each extension is manufactured to factory specifications. Designed to fit in the exhaust manifold port under the main A.I.R. (smog) assembly.

Product#: DMK001

1956-67 Road Draft Tube Mount Set

Hardware and gaskets to mount the road draft tube/crankcase vent tube on your vehicle. Includes bolt, washer, gasket and vent tube to block gasket. Chevrolet / GMC Truck applications: 1956-1967 Chevrolet full size passenger...

Product#: 1256635

1-1/16" Smog Pump Hose Tower Clamp

Reproduction of the original tower design smog pump hose clamp used on all 1967-1982 vehicles. Featuring the correct 1-1/6" diameter size. Sold individually.

Product#: 154202

1964-67 Crankcase Vent Tube Mounting Parts Set , SB, contains: hose, gasket, seal, washer & bolt.

Reproduction crankcase vent tube mounting parts kit for 1964-1967 GM vehicles. Impala / Full Size passenger car applications: 1964-1967 Chevrolet / GMC Truck applications: 1964-1967 Camaro applications: 1967-1967 Chevy...

Product#: 3849733

1964-1967 Crankcase Vent Tube, SB

Reproduction crankcase vent tube for 1964-1966 GM vehicles. This tube installs on the rear most section of the block directly behind the distributor. Crankcase vent hose and mounting kit (#154202) sold separately. Impala /...

Product#: SP10678

1967-68 Camaro, Impala, Caprice, Nova; Lower Smog Pump Bracket; 302, 307, 327, 350 Small Block

Reproduction lower smog pump bracket for various 1967-68 Chevrolet Camaro, Impala, Bel Air, Biscayne, Caprice, and Nova models with 302, 307, 327, 350 small block engines. Each bracket is manufactured in stamped steel to the...

Product#: 3902348

1967 Big Block Smog Pump Check Valve Hose - Main Valve to Check Valve Hose (Molded)

Reproduction of the original air injection reactor hose for use with 1967 396/427 big block models with California emissions. This is the molded hose that goes from the A.I.R. main valve to A.I.R. tube check valve. Features...

Product#: 11132A

1966-67 6 / 8 Cylinder Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non-functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...

Product#: 3889356

1967 Chevrolet; Smog Pump Outlet Hose; Big Block; RH

Reproduction of the original air injection reactor hose for use with 1967 396/427 big block models with California emissions. This is the right hand side air injection reactor outlet hose. Features OEM stampings and part...

Product#: SP10679

1967-68 Camaro, Impala, Nova; Lower Smog Air Pump Bracket; 396, 427 Big Block

Reproduction lower smog air pump bracket for various 1967-68 Chevrolet cars and trucks with big block 396, 427 engines. Each bracket is manufactured in stamped steel and replaces the old or damaged original. Replaces GM part...

Product#: 11110

1966-67 Chevrolet 327ci Remanufactured Smog Pump

This remanufactured smog pump is just what you'll need to replace your non functioning or missing original. Features: 100% testing guarantees reliable performance High temperature grease extends bearing life, resulting in...