1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...
1971-2002 GM; Rear Axle Ventilator; Various Models; Reproduction; for.452" Hole
This reproduction rear axle ventilator is designed for a wide range of 1971-2002 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models. Manufactured from high quality injection molded ABS, it accurately replicates the...
1971-2002 GM; Rear Axle Ventilator; Various Models; Reproduction; for.452" Hole
Classic $9.99 ea
Mopar 8-3/4" Differential Cast Iron 10-Spline Rear Yoke (Uses 7260 Series Strap Retained U-Joint)
This cast iron yoke is manufactured specifically for Mopar differentials. Includes the yoke, and mounting hardware. Important: Use MM3311 s trap kit, Note: Uses 7260 series U-joint (sold separately) that have a 2.125" snap...
Mopar 8-3/4" Differential Cast Iron 10-Spline Rear Yoke (Uses 7260 Series Strap Retained U-Joint)
Classic $241.99 ea
Filtermag; Rear Differential Filter Magnet
FilterMag powerful rare-earth magnet traps and holds wear inducing metal particles smaller than 40-microns down to 1-micron. The super-strong magnetic force holds FilterMag to the cover, is reusable and will reduce...
5/16"-18 X 3/4" ARP Stainless Steel Differential Cover Bolt Set
Enhance the appearance of your rear end with ARP's stainless steel rear cover bolts. These bolts add a lustrous contrast to a painted OEM cover, compliment a chrome plated aftermarket version or add flash to that cast...
8-3/4" Adjustable Pinion Snubber
Designed to bolt on the top front of the axle housing, these Mancini Racing adjustable pinion snubbers help to eliminate axle twist and wheel hop by contacting the floor pan of the car. With several adjustment points, the...
Mopar - Yukon U-Bolt Kit (W/ 7260 Or 7290 U-Joints) - 2 U-Bolts (5/16" X 1-9/16") & 4 Nuts
These u-joint u-bolt kits are designed for use on stock and Yukon pinion yokes with 7260 and 7290 u-joint size. Includes: two u-bolts (5/16" X 1-9/16") and four nuts. Made in the USA. One kit required per vehicle. NOTE: This...
Mopar - Yukon U-Bolt Kit (W/ 7260 Or 7290 U-Joints) - 2 U-Bolts (5/16" X 1-9/16") & 4 Nuts
Classic $19.99 set
Mopar - 8-3/4" Or 9-1/4" With "41" Or "89" Rear Differential - Pinion Seal
Mopar 8-3/4" or 9-1/4" with "41" or "89" case housing
Mopar - 8-3/4" Or 9-1/4" With "41" Or "89" Rear Differential - Pinion Seal
Classic $17.99 ea
Mopar - Yukon U-Bolt Kit (W/ 1350 U-Joint) - 2 U-Bolts (3/8" X 1-11/16") & 4 Nuts
These u-joint u-bolt kits are designed for use on stock and Yukon pinion yokes with 1350 u-joint size. Includes: two u-bolts and four nuts. Made in the USA.
Mopar - Yukon U-Bolt Kit (W/ 1350 U-Joint) - 2 U-Bolts (3/8" X 1-11/16") & 4 Nuts
Classic $20.99 set
1960-76 Mopar Rear End Housing E-Brake and Brake Line Clip Set
Reproduction rear and housing e-brake, and brake line clip set for all 1960-76 models. Replace your rusted originals with these correct replacements. Must be welded to the factory locations.
Mopar Rear Axle Housing Tape - Light Tan
Did you know the rear axle housing was shipped to the assembly plant without the brake lines and fittings in place? A special piece of tape covered the vent hole to keep debris & moisture out during shipping. The plant then...
Mopar - Yukon Strap Kit - With 1350 U-Joint
These u-joint strap kits are designed for use on stock and Yukon pinion yokes with 1350 u-joint size. Includes: two straps and four bolts. Made in the USA.
Mopar 8-3/4" Differential Billet Steel 29-Spline Rear Yoke (Uses 1350 Series U-Bol Retained U-Joint)
This billet steel yoke is manufactured specifically for Mopar differentials. Includes the yoke, and mounting hardware. Important: Use MM3307 u-bolt kit, Note: Uses 1350 series U-joint (sold separately) that have a 3.625" snap...
Mopar 8-3/4" Differential Billet Steel 29-Spline Rear Yoke (Uses 1350 Series U-Bol Retained U-Joint)
Classic $227.99 ea
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1310 Series Strap Retained U-Joint)
This cast iron reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, strap, and mounting hardware. Note: Uses 1310 series U-joints (sold separately) that have a 3.219" snap ring span with...
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1310 Series Strap Retained U-Joint)
Classic $167.99 ea
12 Piece 8-1/4", 8-3/4" Ring Gear Fastener Set
Ring gear bolts for Mopar 8-1/4" and 8-3/4" differentials. These are factory replacement quality. Sold as a set of 12.
12 Piecre Chrome 8-1/4" Differential Cover Bolt Set
Chrome differential cover bolts for 8-1/4" rear axles. Each set includes enough bolts to mount the differential cover to the axle housing.s
10 Piece Chrome Dana 60 Differential Cover Bolts
Chrome differential cover bolts for Dana 60 rear axles. Each set includes enough bolts to mount the differential cover to the axle housing.
Dana 60 Chrome Hex Head Differential Cover Bolt Set
This set is for use on Dana 60, or any other rear end using 3/8"-16 x 3/4" bolts. Includes 12 chrome finished bolts and 12 Flat washers (not chromed).
Mopar - Yukon 1310 U-Joint Strap Kit
These u-joint strap kits are designed for use on stock and Yukon pinion yokes with 1310 u-joint size. Includes: two straps and four bolts. Made in the USA.
Mopar - Yukon Strap Kit - With 7260 U-Joint
These u-joint strap kits are designed for use on stock and Yukon pinion yokes with 7260 u-joint size. Includes: two straps and four bolts. Made in the USA.
Mopar 8-3/4" Differential Forged Steel 10-Spline Rear Yoke (Uses 1350 Series Strap Retained U-Joint)
This forged steel yoke is manufactured specifically for Mopar differentials. Includes the yoke, and mounting hardware. Important: Use MM3310 strap kit, Note: Uses 1350 series U-joint (sold separately) that have a 3.625" snap...
Mopar 8-3/4" Differential Forged Steel 10-Spline Rear Yoke (Uses 1350 Series Strap Retained U-Joint)
Classic $322.99 ea
Mopar 8-3/4" Differential Billet Steel 10-Spline Rear Yoke (Uses 1350 Series U-Bol Retained U-Joint)
This billet steel yoke is manufactured specifically for Mopar differentials. Includes the yoke, and mounting hardware. Important: Use MM3307 u-bolt kit, Note: Uses 1350 series U-joint (sold separately) that have a 3.625" snap...
Mopar 8-3/4" Differential Billet Steel 10-Spline Rear Yoke (Uses 1350 Series U-Bol Retained U-Joint)
Classic $434.99 ea
8-3/4" Differential Chrome Moly Billet 10-Spline Rear Yoke Uses 7260 Series U-Bolt Retained U-Joint
This chrome moly billet yoke is manufactured specifically for Mopar differentials. Includes the yoke, u-bolt, and mounting hardware. Note: Uses 7260 series U-joint (sold separately) that have a 2.125" snap ring sp an with a...
8-3/4" Differential Chrome Moly Billet 10-Spline Rear Yoke Uses 7260 Series U-Bolt Retained U-Joint
Classic $204.99 ea
8-3/4" Differential Chrome Moly Billet 10-Spline Rear Yoke Uses 7290 Series U-Bolt Retained U-Joint
This chrome moly billet reproduction yoke is manufactured specifically for Mopar differentials. Includes the yoke, u-bolt, and mounting hardware. Note: Uses 7290 series U-joints (sold separately) that have a 2.62 5" snap ring...
8-3/4" Differential Chrome Moly Billet 10-Spline Rear Yoke Uses 7290 Series U-Bolt Retained U-Joint
Classic $222.99 ea
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 7290 Series Strap Retained U-Joint)
This cast iron reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, strap, and mounting hardware. Note: Uses 7290 series U-joints (sold separately) that have a 2.625" snap ring span with a...
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 7290 Series Strap Retained U-Joint)
Classic $221.99 ea
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1310 Series U-Bolt Retained U-Joint)
This cast iron reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, u-bolt, and mounting hardware. Note: Uses 1310 series U-joints (sold separately) that have a 3.219" snap rin g span with...
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1310 Series U-Bolt Retained U-Joint)
Classic $213.99 ea
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1330 Series U-Bolt Retained U-Joint)
This cast iron reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, retaining u-bolt, and mounting hardware. Note: Uses 1330 series U-joints (sold separately) that have a 3.625 " snap ring...
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1330 Series U-Bolt Retained U-Joint)
Classic $167.99 ea
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1350 Series Strap Retained U-Joint)
This cast iron reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, retaining strap and mounting hardware. Note: Uses 1350 series U-joint (sold separately) that have a 3.625" s nap ring...
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1350 Series Strap Retained U-Joint)
Classic $204.99 ea
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1350 Series U-Bolt Retained U-Joint)
This cast iron reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, retaining strap and mounting hardware. Note: Uses 1350 series U-joint (sold separately) that have a 3.625" s nap ring...
Dana 60 Axel Cast Iron 29-Spline Rear Yoke (Uses 1350 Series U-Bolt Retained U-Joint)
Classic $228.99 ea
Dana 60 Axel Billet Steel 29-Spline Rear Yoke (Uses 1350 Series Strap Retained U-Joint)
This billet steel reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, retaining strap and mounting hardware. Note: Uses 1350 series U-joint (sold separately) that have a 3.625" snap ring...
Dana 60 Axel Billet Steel 29-Spline Rear Yoke (Uses 1350 Series Strap Retained U-Joint)
Classic $450.99 ea
Dana 60 Axel Forged Steel 29-Spline Rear Yoke (Uses 1350 Series U-Bolt Retained U-Joint)
This forged steel reproduction yoke is manufactured specifically for Dana 60 rear axles. Includes the yoke, retaining u-bolt and mounting hardware. Note: Uses 1350 series U-joint (sold separately) that have a 3.62 5" snap...
Dana 60 Axel Forged Steel 29-Spline Rear Yoke (Uses 1350 Series U-Bolt Retained U-Joint)
Classic $208.99 ea
ARP 8-3/4" Ring Gear Fastener Set
These Pro-Series ring gear bolt kits from ARP are forged from premium-grade 8740 chromoly steel and heat-treated to a rating of 190,000 psi. This is a set of 12 3/8"-24 LH threaded bolts for the 8-3/4" ring gear. Made in USA
8-1/4", 8-3/4" Ring Gear Fastener
Ring gear bolt for Mopar 8-1/4" and 8-3/4" differentials. This is factory replacement quality. Sold individually.
Mopar - Yukon U-Bolt Kit (W/ 1310 U-Joint) - 2 U-Bolts (3/8" X 1-11/16") & 4 Nuts
These u-joint u-bolt kits are designed for use on stock and Yukon pinion yokes with 1310 u-joint size. Includes: two u-bolts (3/8" X 1-11/16") and four nuts. Made in the USA.
Mopar - Yukon U-Bolt Kit (W/ 1310 U-Joint) - 2 U-Bolts (3/8" X 1-11/16") & 4 Nuts
Classic $32.99 set
1962-76 Mopar Differential ; Crush Sleeve Kit ; for 9-1/4"
Replacement crush sleeve for setting up your rear axle. Crush sleeves cannot be reused if you are changing a ring and pinion or the front seal. Includes pinion nut washer and pinion flange nut. These are for the 9-1/4"...
Mopar Rear Axle Housing Tape - Black
Did you know the rear axle housing was shipped to the assembly plant without the brake lines and fittings in place? A special piece of tape covered the vent hole to keep debris & moisture out during shipping. The plant then...
Mopar 8-3/4" (Coarse Spline) Pinion Nut Washer
This pinion nut washer is for the Mopar 8-3/4" 10 spline pinion. FITS: Mopar 8-3/4", 41 Case Housing Mopar 8-3/4", 42 Case Housing Mopar 8-3/4", 89 Case Housing
Mopar 8-3/4" Differential Holding Fixture
Work on your differential third member safely and easily with this lightweight fixture. It can be clamped or bolted to your work bench or simply mounted in a vise, and it fits neatly in your tool chest when the job is...