Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1964-71 Chevrolet, GMC Car & Truck; Floor Mounted Accelerator Pedal Pad Trim Plate; Various Models
Correct reproduction accelerator pedal pad stainless trim plate for various 1965-71 GM vehicles. Manufactured in stamped stainless steel, this trim plate helps restore a factory-correct, period-correct pedal appearance with...
1964-71 Chevrolet, GMC Car & Truck; Floor Mounted Accelerator Pedal Pad Trim Plate; Various Models
Classic $15.99 ea
Correct OER® reproduction of the original floor mounted accelerator pedal pad installed on various GM models. Manufactured in quality hard EPDM rubber, this pad is a great upgrade over plastic service replacement pads and...
Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle pedal assembly, features a removable lower arm and is splined for versatile mounting to either the right or left...
Lokar Aluminum Throttle Pedal Assembly; Features 2" x 5" Pedal Pad; Black Anodized Finish with Rubber Inserts
Classic $231.99 ea
When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal...
Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts
The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...
Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts
Classic $175.99 ea
Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...
Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
Classic $224.99 ea
1958-71 GM; Accelerator Pedal Ball Stud Pivot; 1/4"-20 x 1-1/2"; Each; Various Models
Reproduction factory ball stud pivot for various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing the gas pedal...
1958-71 GM; Accelerator Pedal Ball Stud Pivot; 1/4"-20 x 1-1/2"; Each; Various Models
Classic $3.99 ea
Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts
Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA
Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts
Classic $95.99 ea
Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts
Classic $231.99 ea
Street Demon; Throttle Solenoid Set
Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel Systems includes the solenoid, bracket, and mounting nut....
Holley; Throttle Cable Bracket
This chrome throttle cable bracket can be used with all 4150 and 4160 model square bore Holley carburetors. It includes dual stainless steel return springs.
Lokar Stainless Steel Throttle Cable Springs
Stainless steel GM designed dual springs for use with Lokars SR4001 bracket (sold separately). Made in USA
2 and 4 Bbl Holley Throttle Return Spring Set
Fits Holley 2300 and 2305 2 bbl. or Holley 4150 and 4160 4 bbl. carburetors mounted on any manifold.
Lokar Black Anodized Billet Aluminum 3/4" Throttle Assembly Spacer
Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA
Lokar Billet Aluminum Throttle Pedal Assembly; features 1-1/2" x 4" Pedal Pad; Ball Milled Finish
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Pedal Assembly; features 1-1/2" x 4" Pedal Pad; Ball Milled Finish
Classic $224.99 ea
Lokar Chrome Steel 3/4" Throttle Assembly Spacer
Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA
Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish
Classic $231.99 ea
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
Classic $3.99 set
Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts
The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...
Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts
Classic $188.99 ea
Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...
Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts
Classic $224.99 ea
Lokar Brushed Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer
Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA
2011-22 Ford Mustang; Holley Drive by Wire Accelerator Pedal
This Holley DBW accelerator pedal is a perfect compliment to any vehicle using Drive by Wire. Offers plug and play compatibility with Holley EFI and simply bolts in stock locations when used with Holley DBW Pedal Brackets....
Lokar Billet Aluminum 3/4" Throttle Assembly Spacer
Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA
Chrome Carburetor Return Spring Bracket; Universal
This chrome universal carb return bracket is designed to replace the original bracket for most carburetors. Adds a high performance touch to any carburetor.
Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Cadmium Plated
Edelbrock throttle, cruise control, and transmission kick down set for pre-1978 small block Chevy cars with a TH350, 200R4, or 700R4 transmission. Manufactured in stamped steel and either chrome or gold cadmium plated....
Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Cadmium Plated
Classic $53.99 ea
Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Chrome Plated
Edelbrock throttle, cruise control, and transmission kick down set for pre-1978 small block Chevy cars with a TH350, 200R4, or 700R4 transmission. Manufactured in stamped steel and either chrome or gold cadmium plated....
Edelbrock Small Block Chevy Throttle/Cruise Control/Kickdown Bracket - Chrome Plated
Classic $83.99 ea
1955-1970 Accelerator Throttle Lever Arm Pinch Bolt Kit
Correct reproduction accelerator throttle lever to pedal rod pinch bolt kit, includes (1) 1/4-20 x 1-1/4" grade 5 bolt, nut & washer. GM Full Size passenger car applications: 1955-1970 Camaro applications: 1967-1969 Chevy...
1967-70 Chevy, GMC Pickup, Blazer. Suburban; Accelerator Pedal Pad; w/o Trim Package
Reproduction accelerator pedal pad for 1967-70 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models with standard interiors. Manufactured in injection molded ABS to original specifications, this pad restores a...
1967-70 Chevy, GMC Pickup, Blazer. Suburban; Accelerator Pedal Pad; w/o Trim Package
Classic $10.99 ea
1968-70 Camaro, Chevy, GMC Pickup C/K; Cruise Control Servo Mount Bracket
Correct reproduction of the original cruise control servo mounting bracket for 1968-70 Camaro, pickup, Blazer, and Suburban truck models with the factory optional cruise control. This bracket features the actuator support...
1968-70 Camaro, Chevy, GMC Pickup C/K; Cruise Control Servo Mount Bracket
Classic $89.99 ea